TPS5410-EP
- Wide Input Voltage Range: 5.5 V to 36 V
- Up to 1-A Continuous (1.2-A Peak) Output Current
- High Efficiency up to 95% Enabled by 110-m
Integrated MOSFET Switch - Wide Output Voltage Range: Adjustable Down
to 1.22 V with 1.5% Initial Accuracy - Internal Compensation Minimizes External
Parts Count - Fixed 500-kHz Switching Frequency for Small
Filter Size - Improved Line Regulation and Transient
Response by Input Voltage Feed Forward - System Protected by Over Current Limiting, Over
Voltage Protection and Thermal Shutdown - 55°C to 125°C Operating Junction
Temperature Range - Available in Small 8-Pin SOIC Package
- For SWIFT Documentation, Application Notes and Design
Software, See the TI Website at www.ti.com/swift - SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
- Controlled Baseline
- One Assembly/Test Site
- One Fabrication Site
- Available in Military (55°C/125°C)
Temperature Range(1) - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
(1) Additional temperature ranges are available - contact factory
SWIFT is a trademark of Texas Instruments.
As a member of the SWIFT family of DC/DC regulators, the TPS5410 is a high-output-current PWM converter that integrates a low resistance high side N-channel MOSFET. Included on the substrate with the listed features is a high performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 µA typically. Other features include an active high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5410 feedback loop is internally compensated.
The TPS5410 device is available in an easy to use 8-pin SOIC package. TI provides evaluation modules and software tools to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | 1-A Wide Input Range Step-Down Swift Converter datasheet | 2009年 9月 1日 | |
* | VID | TPS5410-EP VID V6209645 | 2016年 6月 21日 | |
* | Radiation & reliability report | TPS5410MDREP Reliability Report | 2012年 8月 13日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOIC (D) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點