TPS61281D
- 95% efficiency at 2.3 MHz operation
- 3-µA quiescent current in low I Q pass-through mode
- Wide V IN range from 2.3 V To 4.8 V
- I OUT ≥ 4-A (Peak) at V OUT = 3.35 V, V IN ≥ 2.65 V
- Integrated pass-through mode (35 mΩ)
- Programmable valley inductor current limit and output voltage
- True pass-through mode during shutdown
- Best-in-class line and load transient
- Low-ripple light-load PFM mode
- In-Situ customization with On-Chip E 2PROM (write protection)
- Two interface options:
- I 2C compatible I/F up to 3.4 Mbps (TPS61280D/E)
- Simple I/O logic control interface
- Thermal shutdown and overload protection
- Total solution size < 20 mm 2, sub 1-mm profile
The TPS6128xD/E device provides a power supply solution for products powered by either by a Li-Ion, Nickel-Rich, Silicon Anode, Li-Ion or LiFePO4 battery. The voltage range is optimized for single-cell portable applications like in smart-phones or tablet PCs.
Used as a high-power pre-regulator, the TPS6128xD/E extends the battery run-time and overcomes input current- and voltage limitations of the powered system.
While in shutdown, the TPS6128xD/E operates in a true pass-through mode with only 3-µA quiescent consumption for longest battery shelf life.
During operation, when the battery is at a good state-of-charge, a low-ohmic, high-efficient integrated pass-through path connects the battery to the powered system.
If the battery gets to a lower state of charge and its voltage becomes lower than the desired minimum system voltage, the device seamlessly transits into boost mode to uses the full battery capacity.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPS6128xD/E Low-IQ, Wide-Voltage Battery Front-End DC/DC Converter for Single-Cell Li-Ion, Ni-Rich, Si-Anode Applications datasheet (Rev. B) | PDF | HTML | 2019年 5月 17日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS61281EVM-586 — TPS61281EVM-586 - 具有直通模式的升壓轉換器評估模組
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
DSBGA (YFF) | 16 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點