首頁 電源管理 多通道 IC (PMIC)
首頁
電源管理
多通道 IC (PMIC)

TPS65320-Q1

不推薦在新設計中採用

具自動來源 280mA LDO 穩壓器的車用 3.6V 至 36V、3.2A 降壓轉換器

立即訂購
產品規格表
TPS65320-Q1 不建議用於新設計
此產品將繼續向現有客戶提供。新設計應考量替代產品。
open-in-new 比較替代產品
可直接投入的替代產品，相較於所比較的裝置，具備升級功能
TPS65320D-Q1 現行 具有自動來源 280mA LDO 穩壓器的汽車 3.6V 至 36V、3.2A 降壓轉換器 The TPS65320D-Q1 is a replacement for the TPS65320-Q1.

TPS65320-Q1

不推薦在新設計中採用
產品規格表 立即訂購

產品詳細資料

Processor supplier Generic Processor name Generic Vin (min) (V) 3.6 Vin (max) (V) 36 Vout (min) (V) 1.1 Vout (max) (V) 20 Iout (max) (A) 3.2 Features Eco-mode, Enable, Overcurrent protection, Power good, Thermal shutdown Rating Automotive Operating temperature range (°C) -40 to 125 Iq (typ) (mA) 0.14 Switching frequency (max) (kHz) 2500 Shutdown current (ISD) (typ) (µA) 2 Product type Microcontrollers
Processor supplier Generic Processor name Generic Vin (min) (V) 3.6 Vin (max) (V) 36 Vout (min) (V) 1.1 Vout (max) (V) 20 Iout (max) (A) 3.2 Features Eco-mode, Enable, Overcurrent protection, Power good, Thermal shutdown Rating Automotive Operating temperature range (°C) -40 to 125 Iq (typ) (mA) 0.14 Switching frequency (max) (kHz) 2500 Shutdown current (ISD) (typ) (µA) 2 Product type Microcontrollers
HTSSOP (PWP) 14 32 mm² 5 x 6.4
  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4B
  • One High-VIN Step-Down Converter
    • 3.6- to 40-V Input Range
    • 250-mΩ High-Side MOSFET
      • 3.2-A Maximum Load Current, 1.1- to 20-V Output Adjustable
    • 100-kHz to 2.5-MHz Adjustable Switch-Mode Frequency
    • Less Than 140-µA Operating Quiescent Current
  • One Low-Dropout Voltage Regulator (LDO)
    • 280-mA Current Capability With 28-μA (Typical) Operating Quiescent Current in No-Load Condition
    • Input Supply Auto-Source to Balance Efficiency and Low Standby Current
    • Power-Good Output (Push-Pull)
    • Low-Dropout Voltage of 300 mV at IOUT = 200 mA (Typical)
  • Overcurrent Protection for Both Regulators
  • Overtemperature Protection
  • 14-Pin HTSSOP Package With PowerPAD Package

All trademarks are the property of their respective owners.

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4B
  • One High-VIN Step-Down Converter
    • 3.6- to 40-V Input Range
    • 250-mΩ High-Side MOSFET
      • 3.2-A Maximum Load Current, 1.1- to 20-V Output Adjustable
    • 100-kHz to 2.5-MHz Adjustable Switch-Mode Frequency
    • Less Than 140-µA Operating Quiescent Current
  • One Low-Dropout Voltage Regulator (LDO)
    • 280-mA Current Capability With 28-μA (Typical) Operating Quiescent Current in No-Load Condition
    • Input Supply Auto-Source to Balance Efficiency and Low Standby Current
    • Power-Good Output (Push-Pull)
    • Low-Dropout Voltage of 300 mV at IOUT = 200 mA (Typical)
  • Overcurrent Protection for Both Regulators
  • Overtemperature Protection
  • 14-Pin HTSSOP Package With PowerPAD Package

All trademarks are the property of their respective owners.

The TPS65320-Q1 device is a combination of a 40-V, 3.2-A, DC-DC step-down converter and a low-dropout (LDO) regulator. The DC-DC step-down converter, referred to as the buck regulator, has an integrated high-side MOSFET. The LDO regulator also has an integrated MOSFET and a low-input supply current of 28-μA (typical) in a no-load condition. Furthermore, the LDO regulator has an active-low, push-pull reset output pin. To reduce heat, the input supply of the LDO regulator can auto-source from the input voltage to the output of the buck regulator. The low-voltage tracking feature can eliminate the need to use a boost converter during cold-crank conditions.

The buck regulator has a switching frequency range from 100 kHz to 2.5 MHz that provides a flexible design to fix system requirements. The external loop compensation allows for optimization of the converter response for the appropriate operating conditions. A low-ripple pulse-skip mode reduces the no-load input supply current to less than 140 μA.

The device has built-in protection features such as soft start, current limit, thermal sensing, and shutdown because of excessive power dissipation. Furthermore, the device has an internal undervoltage-lockout (UVLO) function that turns off the device at a too-low supply voltage.

The TPS65320-Q1 device is a combination of a 40-V, 3.2-A, DC-DC step-down converter and a low-dropout (LDO) regulator. The DC-DC step-down converter, referred to as the buck regulator, has an integrated high-side MOSFET. The LDO regulator also has an integrated MOSFET and a low-input supply current of 28-μA (typical) in a no-load condition. Furthermore, the LDO regulator has an active-low, push-pull reset output pin. To reduce heat, the input supply of the LDO regulator can auto-source from the input voltage to the output of the buck regulator. The low-voltage tracking feature can eliminate the need to use a boost converter during cold-crank conditions.

The buck regulator has a switching frequency range from 100 kHz to 2.5 MHz that provides a flexible design to fix system requirements. The external loop compensation allows for optimization of the converter response for the appropriate operating conditions. A low-ripple pulse-skip mode reduces the no-load input supply current to less than 140 μA.

The device has built-in protection features such as soft start, current limit, thermal sensing, and shutdown because of excessive power dissipation. Furthermore, the device has an internal undervoltage-lockout (UVLO) function that turns off the device at a too-low supply voltage.
filter 尋找其它 多通道 IC (PMIC)
下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet TPS65320-Q1 40-V Step-Down Converter With Eco-mode and LDO Regulator datasheet (Rev. F) PDF | HTML 2016年 3月 7日

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點