TPS65735
- Linear Charger
- Three Charger Phases: Pre-Charge,
Fast Charge, and Charge Termination - Externally Set Charge Current Which Supports
up to 100 mA - LED Current Sinks for Power Good and Charger
Status Indication
- Three Charger Phases: Pre-Charge,
- Low-Dropout Regulator (LDO) Supply for External
Modules (Microcontroller, RF Module, IR Module)- LDO Continuous Output Current up to 30 mA
- Boost Converter
- Adjustable Output Voltage: 8 V to 16 V
- Boost Output Internally Connected to H-Bridge
Analog Switches
- Full H-Bridge Analog Switches
- Controlled by an External Microcontroller for
System Operation
- Controlled by an External Microcontroller for
- Output Pin for Divided Down Battery Voltage
Useful for ADC or Comparator Input of an MCU
The TPS65735 device is a power management unit (PMU) for active shutter 3D glasses consisting of an integrated power path, linear charger, LDO, boost converter, and full H-bridge analog switches for left and right shutter operation in a pair of active shutter 3D glasses. In addition to the power devices, a typical 3D glasses system contains both a microcontroller and a communications front end (IR, RF, or other) in order to handle the communication and synchronous operation along with a 3D television.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TPS65735 PMU for Active Shutter 3D Glasses datasheet (Rev. A) | PDF | HTML | 2016年 1月 6日 |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
| Application note | Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) | 2012年 1月 13日 | ||
| User guide | TPS65735 System Eval Board User's Guide | 2011年 6月 15日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RSN) | 32 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點