產品詳細資料

Architecture DSP Input signal I2C Vs (min) (V) 3 Vs (max) (V) 3.6 Vout (max) (V) 3.6 Iq (typ) (mA) 7 Bandwidth (typ) (MHz) 5 Shutdown current (ISD) (µA) 1.2 Rating Automotive Operating temperature range (°C) -40 to 125
Architecture DSP Input signal I2C Vs (min) (V) 3 Vs (max) (V) 3.6 Vout (max) (V) 3.6 Iq (typ) (mA) 7 Bandwidth (typ) (MHz) 5 Shutdown current (ISD) (µA) 1.2 Rating Automotive Operating temperature range (°C) -40 to 125
VQFN-HR (RQT) 32 22.5 mm² 5 x 4.5
  • Integrated Programmable Cleaning Modes
    • Water (expelling)
    • Deice (melting and expelling)
    • Mud (dehydrating and expelling)
    • Auto-cleaning (detecting mass and expelling)
    • Custom cleaning modes
  • Embedded algorithms
    • Lens system calibration
    • Automatic mass detection
    • Power regulation
    • System diagnostics
  • System diagnostics
    • Driver fault reporting
    • Lens system fault reporting
    • Transducer temperature regulation
  • Wide-drive frequency range
    • High-efficiency direct drive (10kHz - 5MHz)
    • AD modulation (<50kHz)
  • I2C user interface
  • Clock source required
    • External oscillator (10MHz, 5ppm recommended)
  • Power supplies
    • IOVDD: 3.3V
  • 32-pin, QFN-HR package
  • Integrated Programmable Cleaning Modes
    • Water (expelling)
    • Deice (melting and expelling)
    • Mud (dehydrating and expelling)
    • Auto-cleaning (detecting mass and expelling)
    • Custom cleaning modes
  • Embedded algorithms
    • Lens system calibration
    • Automatic mass detection
    • Power regulation
    • System diagnostics
  • System diagnostics
    • Driver fault reporting
    • Lens system fault reporting
    • Transducer temperature regulation
  • Wide-drive frequency range
    • High-efficiency direct drive (10kHz - 5MHz)
    • AD modulation (<50kHz)
  • I2C user interface
  • Clock source required
    • External oscillator (10MHz, 5ppm recommended)
  • Power supplies
    • IOVDD: 3.3V
  • 32-pin, QFN-HR package

The ULC1001-Q1 is a configurable PWM modulator with current and voltage sensing capabilities specifically for piezo-based lens cleaning systems.

An on-chip, low-latency DSP supports Texas Instruments’ proprietary algorithms designed for lens cleaning. The ULC1001-Q1 and DRV2911-Q1 work together to create an Ultrasonic Lens Cleaning system.

The ULC1001-Q1 device is available in a 32-pin QFN-HR package for a compact PCB footprint.

The ULC1001-Q1 is a configurable PWM modulator with current and voltage sensing capabilities specifically for piezo-based lens cleaning systems.

An on-chip, low-latency DSP supports Texas Instruments’ proprietary algorithms designed for lens cleaning. The ULC1001-Q1 and DRV2911-Q1 work together to create an Ultrasonic Lens Cleaning system.

The ULC1001-Q1 device is available in a 32-pin QFN-HR package for a compact PCB footprint.

下載 觀看有字幕稿的影片 影片
索取更多資訊

提供完整產品規格表、ULC1001-Q1 GUI 及其他設計資源。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet ULC1001 -Q1 Configurable Ultrasonic PWM Modulator With I/V Sense Amplifiers datasheet PDF | HTML 2024年 6月 21日
Application note Design, Fabrication, and Assembly Guide of Lens Cover System: LCS-FL-RNG15 PDF | HTML 2024年 6月 11日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

ULC1001-DRV290XEVM — 適用於超音波鏡頭清洗 (ULC) 的 ULC1001 和 DRV2901 硬體評估配套

ULC1001-DRV290XEVM 是一款評估模組 (EVM),展示 ULC1001 可配置數位訊號處理器 (DSP) 控制器和 DRV2901 壓電式驅動器的雙晶片解決方案。兩者搭配運作提供溫度偵測、鏡頭故障偵測和污染物偵測等功能,以進行自動清潔。此評估模組不包含鏡頭系統。USB2ANY 另售。

TI 打造靈活的開放原始碼鏡頭蓋系統 (LCS) 設計,協助客戶學習及設計 ULC 技術。TI 提供如 LCS-FL-RNG15 等原型單元,可做為自訂設計的參考或 ULC EVM 的負載。

使用指南: PDF | HTML
TI.com 無法提供
開發板

ULC1001-DRV2911EVM — ULC1001 和 DRV2911 評估模組

ULC1001-DRV2911EVM 是一種超音波鏡頭清潔 (ULC) 評估模組(EVM),展示 ULC1001 DSP 控制器和 DRV2911 壓電式驅動器的車用級雙晶片解決方案。兩者搭配運作提供溫度偵測、鏡頭故障偵測和污染物偵測等功能,以進行自動清潔。此 EVM 提供 ULC 系統的電力部分,並可驅動各種機械設計,但此 EVM 不包含鏡頭系統。

TI 打造靈活的開放原始碼鏡頭蓋系統 (LCS) 設計,協助客戶學習及設計 ULC 技術。TI 提供如 LCS-FL-RNG15 等原型單元,可做為自訂設計的參考或 ULC EVM 的負載。

使用指南: PDF | HTML
開發板

ULC-HPB-DEMO — 2-MP camera with integrated ultrasonic lens cleaning and mini spray bottle

The ULC-HPB-DEMO is a collaboration between Texas Instruments and HPB Optoelectronics to create an all-in-one evaluation system for ultrasonic lens cleaning (ULC). The construction of the demonstration kit is completed by HPB Optoelectronics. Also known as the Executive Demo, this demo is simple (...)
使用指南: PDF | HTML
支援軟體

ULC-DESIGN Design resources for Ultrasonic Lens Cleaning

ULC1001 GUI and other design resources for Ultrasonic Lens Cleaning technology.
支援產品和硬體

支援產品和硬體

產品
超音波清潔 IC
DRV2901 適用超音波清潔的單通道 PWM 輸入壓電式轉換器驅動器,並提供廣泛的供應電壓範圍 DRV2911-Q1 適用於超音波清潔的車用單通道 PWM 輸入壓電轉換器驅動器 ULC1001 適用超音波鏡頭清潔的可配置 DSP,具電流與電壓感測及 PWM 輸出 ULC1001-Q1 適用超音波鏡頭清潔的車用可配置 DSP,具電流與電壓感測
硬體開發
開發板
ULC1001-DRV290XEVM 適用於超音波鏡頭清洗 (ULC) 的 ULC1001 和 DRV2901 硬體評估配套 ULC1001-DRV2911EVM ULC1001 和 DRV2911 評估模組
計算工具

ULC1001-CALC ULC1001 excel calculator tool

Excel calculator for configuring the IV sense resistors and Q format scaling for programming registers.
支援產品和硬體

支援產品和硬體

產品
超音波清潔 IC
ULC1001 適用超音波鏡頭清潔的可配置 DSP,具電流與電壓感測及 PWM 輸出 ULC1001-Q1 適用超音波鏡頭清潔的車用可配置 DSP,具電流與電壓感測
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN-HR (RQT) 32 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片