Produktdetails

Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -55 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, UL recognized Supply current (max) (µA) 500 Temp resolution (max) (Bits) 9 Remote channels (#) 0 Addresses 8 Rating Catalog
Local sensor accuracy (max) 2 Type Local Operating temperature range (°C) -55 to 125 Supply voltage (min) (V) 2.7 Interface type I2C, SMBus Supply voltage (max) (V) 5.5 Features ALERT, UL recognized Supply current (max) (µA) 500 Temp resolution (max) (Bits) 9 Remote channels (#) 0 Addresses 8 Rating Catalog
SOIC (D) 8 29.4 mm² 4.9 x 6 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • No External Components Required
  • Shutdown Mode to Minimize Power Consumption
  • Up to Eight LM75As can be Connected to a Single Bus
  • Power up Defaults Permit Stand-Alone Operation as Thermostat
  • Key Specifications:
    • Supply Voltage
      • LM75A: 2.7 V to 5.5 V
    • Supply Current
      • Operating: 280 µA (Typical)
      • Shutdown: 4 µA (Typical)
    • Temperature Accuracy
      • 25°C to 100°C: ±2°C (Max)
      • 55°C to 125°C: ±3°C (Max)
  • No External Components Required
  • Shutdown Mode to Minimize Power Consumption
  • Up to Eight LM75As can be Connected to a Single Bus
  • Power up Defaults Permit Stand-Alone Operation as Thermostat
  • Key Specifications:
    • Supply Voltage
      • LM75A: 2.7 V to 5.5 V
    • Supply Current
      • Operating: 280 µA (Typical)
      • Shutdown: 4 µA (Typical)
    • Temperature Accuracy
      • 25°C to 100°C: ±2°C (Max)
      • 55°C to 125°C: ±3°C (Max)

The LM75A is an industry-standard digital temperature sensor with an integrated sigma-delta analog-to-digital converter (ADC) and I2C interface. The LM75A provides 9-bit digital temperature readings with an accuracy of ±2°C from –25°C to 100°C and ±3°C over –55°C to 125°C.

The LM75A operates with a single supply from 2.7 V to 5.5 V. Communication is accomplished over a 2-wire interface which operates up to 400 kHz. The LM75A has three address pins, allowing up to eight LM75A devices to operate on the same 2-wire bus. The LM75A has a dedicated overtemperature output (O.S.) with programmable limit and hysteresis. This output has programmable fault tolerance, which lets the user to define the number of consecutive error conditions that must occur before O.S. is activated. The wide temperature and supply range and I2C interface make the LM75A ideal for a number of applications including base stations, electronic test equipment, office electronics, personal computers, and any other system in which thermal management is critical to performance. The LM75A is available in an SOIC-8 package and an VSSOP-8 package.

The LM75A is an industry-standard digital temperature sensor with an integrated sigma-delta analog-to-digital converter (ADC) and I2C interface. The LM75A provides 9-bit digital temperature readings with an accuracy of ±2°C from –25°C to 100°C and ±3°C over –55°C to 125°C.

The LM75A operates with a single supply from 2.7 V to 5.5 V. Communication is accomplished over a 2-wire interface which operates up to 400 kHz. The LM75A has three address pins, allowing up to eight LM75A devices to operate on the same 2-wire bus. The LM75A has a dedicated overtemperature output (O.S.) with programmable limit and hysteresis. This output has programmable fault tolerance, which lets the user to define the number of consecutive error conditions that must occur before O.S. is activated. The wide temperature and supply range and I2C interface make the LM75A ideal for a number of applications including base stations, electronic test equipment, office electronics, personal computers, and any other system in which thermal management is critical to performance. The LM75A is available in an SOIC-8 package and an VSSOP-8 package.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Drop-In-Ersatz mit verbesserter Funktionalität im Gegensatz zum verglichenen Baustein
TMP1075 AKTIV Temperatursensor für I²C mit 1 Grad Celsius Genauigkeit mit Leistungsaufrüstungen gemäß Industriesta This product is a digital temperature sensor with improved accuracy (±1°C) and lower max current consumption (4µA)
Gleiche Funktionalität, andere Pinbelegung als verglichener Baustein
NEU TMP110 AKTIV I²C-Temperatursensor mit Genauigkeit von ±1,0 °C und Alarmfunktion im kompakten X2SON-Gehäuse Device for cost-optimized designs, with improved accuracy (±1.0°C | max), similar register map, wider VCC range (1.14 to 5.5V), in a smaller X2SON-5 package (0.8 × 0.8mm)

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 7
Typ Titel Datum
* Data sheet LM75A Digital Temperature Sensor and Thermal Watchdog With Two-Wire Interface datasheet (Rev. P) PDF | HTML 30 Dez 2014
Application note LM75B and TMP1075 Industry-Standard Devices: Design Guidelines and Spec Comparison (Rev. A) PDF | HTML 07 Mär 2024
Application note Temperature sensors: PCB guidelines for surface mount devices (Rev. A) 18 Jan 2019
Application note Applying I2C-Compatible Temperature Sensors in Systems With Slow Clock Edges (Rev. A) 06 Mai 2013
User guide LM75A User’s Guide 17 Jan 2013
User guide LM75AEB User’s Guide (Rev. A) 24 Aug 2012
Application note Tiny Temperature Sensors for Remote Systems 17 Feb 2003

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Treiber oder Bibliothek

LM75SW-LINUX — Linux-Treiber für I2C-Temperatursensoren

The Linux driver support LM75 compatible Temperature Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline Status

Available in Linux Main line: Yes
Available through git.ti.com: N/A

Supported Devices:
  • LM75A
  • TMP100
  • TMP101
  • (...)
Support-Software

SENSOREVAL Eval Board Software For Hardware Monitors And Digital Temperature Sensors

SensorEval
SensorEval software supports the latest TI temperature sensor and hardware monitor evaluation boards via USB interface. It also allows access to sensors mounted directly on motherboards that support Intel chip sets.

  • Download SensorEval Software and Manual
  • Windows XP support is offered for (...)
Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Digitale Temperatursensoren
LM63 1 Remote- und lokaler Temperatursensor mit Lüftersteuerung LM64 1 Remote- und lokaler Temperatursensor mit Lüftersteuerung und 5 GPIOs LM71 Temperatursensor mit SPI-Schnittstelle (±1,5°C) LM71-Q1 Temperatursensor, Automotive Grade, ±1,5 °C, mit SPI-Schnittstelle LM73 Temperatursensor (±1°C) mit I2C/SMBus-Schnittstelle LM75A Industriestandard-Temperatursensor, 2 C, I2C/SMBus-Schnittstelle LM86 Remote und lokaler Temperatursensor mit ±0,75 C Abweichung mit SMBus-Schnittstelle LM89 Remote und lokaler Temperatursensor mit ±0,75 C Abweichung mit SMBus-Schnittstelle und 2 Adressen fü LM90 Remote und lokaler Temperatursensor mit SMBus-Schnittstelle LM93 2 Remote-Temperatursensoren, 1 lokaler Temperatursensor mit Hardwareüberwacher und 16 Stromversorgun LM95010 Temperatursensor (±2°C Abweichung) mit SensorPath-Schnittstelle LM95071 Temperatursensor mit SPI-Schnittstelle (±1°C) LM95172-Q1 Temperatursensor, Automotive Grade, ±1°C, mit Temperaturbereich bis 200 °C und SPI-Schnittstelle LM95214 Vierfacher remote und lokaler Temperatursensor (±2°C Abweichung) mit SMBus-Schnittstelle LM95221 Dual-Temperatursensor, ±3 °C, remote und lokal mit Beta-Kompensation und Schnittstelle SMB LM95231 Zweifacher Remote- und lokaler Temperatursensor mit TruTherm-Technologie und SMBus-Schnittstelle LM95233 Zweifacher remote und lokaler Temperatursensor mit ±2 C Abweichung mit TruTherm-Technologie und SMBu LM95234 Vierfacher remote und lokaler Temperatursensor (±2°C Abweichung) mit TruTherm-Technologie Und SMBus- LM95235 ±0,75°C Remote- und lokaler Temperatursensor mit SMBus, Beta-Kompensation für 65/90-nm LM95235-Q1 Remote und lokaler Temperatursensor, Automotive Grade, ±2 °C, mit TruTherm-Technologie und SMBus LM95241 ±1,25°C, Dual-Remote- & lokaler Temperatursensor mit Beta-Kompensation und SMBus, LM95245 Remote- und lokaler Temperatursensor mit SMBus, Beta-Kompensation für 45-nm-Dioden, ±0,75  LM96000 Hardware-Überwachung mit Lüftersteuerung und 6-Volt-Versorgungsspannungsüberwachung LM96080 1 lokaler Temperatursensor mit Lüftergeschwindigkeit und Stromversorgung Spannungsüberwachung LM96163 1 Remote- und lokaler Temperatursensor mit Beta-Kompensation und Lüftersteuerung LM99 Remote- und lokaler Temperatursensor mit TruTherm-Technologie und SMBus-Schnittstelle
Präzisions-ADCs
ADC128D818 Delta-Sigma-ADC mit 12 Bit, 82 SPS, 8 Kanälen, Temperatursensor, INT/EXT-Spannungsreferenz und I2C-S
Simulationsmodell

LM75A IBIS Model

SNOM549.ZIP (33 KB) - IBIS Model
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (D) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos