MAX3227

AKTIV

3 V bis 5,5 V-Einzelkanal-RS-232-Leitungstreiber/‑Empfänger mit 1 Mbit/s und +/-15-kV-ESD-Schutz

Jetzt bestellen

Datenblatt

document-pdfAcrobat MAX3227 datasheet (Rev. A) (Englisch)

Eine neuere Version dieses Produkts ist verfügbar

open-in-new

Alternativen vergleichen

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität

MAX3227E

AKTIV

3- bis 5,5 V-Einkanal-RS-232-Leitungstreiber/‑Empfänger mit 1 Mbit/s und +/-15 kV-IEC-ESD-Schutz TI recommends the MAX3227E in new designs. The MAX3227E is an improved direct drop-in replacement for the MAX3227.

MAX3227

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Drivers per package

1

Receivers per package

1

Logic voltage (min) (V)

3.3

Data rate (max) (Mbps)

1

Main supply voltage (nom) (V)

3.3, 5

Features

Auto-Powerdown Plus

ESD HBM (kV)

15

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Vout (typ) (V)

5.4

Drivers per package

1

Receivers per package

1

Logic voltage (min) (V)

3.3

Data rate (max) (Mbps)

1

Main supply voltage (nom) (V)

3.3, 5

Features

Auto-Powerdown Plus

ESD HBM (kV)

15

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Vout (typ) (V)

5.4

SSOP (DB)

16

48.36 mm² 6.2 x 7.8

Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
Operates With 3-V to 5.5-V V_CC Supply
Operates at Least 1 Mbit/s
Low Standby Current . . . 1 µA Typ
External Capacitors . . . 4 × 0.1 µF
Accepts 5-V Logic Input With 3.3-V Supply
Designed to Be Interchangeable With Maxim™: MAX3227
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection for RS-232 I/O Pins
- ±15 kV - Human-Body Model
- ±8 kV - IEC61000-4-2, Contact Discharge
- ±8 kV - IEC61000-4-2, Air-Gap Discharge
Auto-Powerdown Plus Feature Automatically Disables Drivers for Power Savings
Packaged in Plastic Shrink Small-Outline Package
APPLICATIONS
- Battery-Powered, Hand-Held, and Portable Equipment
- PDAs and Palmtop PCs
- Notebooks, Sub-Notebooks, and Laptops
- Digital Cameras
- Mobile Phones and Wireless Devices

All other trademarks are the property of their respective owners

Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
Operates With 3-V to 5.5-V V_CC Supply
Operates at Least 1 Mbit/s
Low Standby Current . . . 1 µA Typ
External Capacitors . . . 4 × 0.1 µF
Accepts 5-V Logic Input With 3.3-V Supply
Designed to Be Interchangeable With Maxim™: MAX3227
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
ESD Protection for RS-232 I/O Pins
- ±15 kV - Human-Body Model
- ±8 kV - IEC61000-4-2, Contact Discharge
- ±8 kV - IEC61000-4-2, Air-Gap Discharge
Auto-Powerdown Plus Feature Automatically Disables Drivers for Power Savings
Packaged in Plastic Shrink Small-Outline Package
APPLICATIONS
- Battery-Powered, Hand-Held, and Portable Equipment
- PDAs and Palmtop PCs
- Notebooks, Sub-Notebooks, and Laptops
- Digital Cameras
- Mobile Phones and Wireless Devices

All other trademarks are the property of their respective owners

The MAX3227 consists of one line driver, one line receiver, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. This device operates at data-signaling rates of 1 Mbit/s in normal operating mode and a maximum of 30-V/µs driver output slew rate. This device also features a logic-level output (READY) that asserts when the charge pump is regulating and the device is ready to begin transmitting.

The MAX3227 achieves a 1-µA supply current using the auto-powerdown plus feature. This device automatically enters a low-power powerdown mode when the RS-232 cable is disconnected or the drivers of the connected peripherals are inactive for more than 30 s. They turn on again when they sense a valid transition at any driver or receiver input. Auto-powerdown saves power without changes to the existing BIOS or operating system.

The MAX3227C is characterized for operation from 0°C to 70°C. The MAX3227I is characterized for operation from -40°C to 85°C.

The MAX3227 consists of one line driver, one line receiver, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. This device operates at data-signaling rates of 1 Mbit/s in normal operating mode and a maximum of 30-V/µs driver output slew rate. This device also features a logic-level output (READY) that asserts when the charge pump is regulating and the device is ready to begin transmitting.

The MAX3227 achieves a 1-µA supply current using the auto-powerdown plus feature. This device automatically enters a low-power powerdown mode when the RS-232 cable is disconnected or the drivers of the connected peripherals are inactive for more than 30 s. They turn on again when they sense a valid transition at any driver or receiver input. Auto-powerdown saves power without changes to the existing BIOS or operating system.

The MAX3227C is characterized for operation from 0°C to 70°C. The MAX3227I is characterized for operation from -40°C to 85°C.

filter

Andere RS-232-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	MAX3227 datasheet (Rev. A)		21 Feb 2006

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
SSOP (DB)	16	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

MAX3227

3 V bis 5,5 V-Einzelkanal-RS-232-Leitungstreiber/‑Empfänger mit 1 Mbit/s und +/-15-kV-ESD-Schutz

Eine neuere Version dieses Produkts ist verfügbar

Drop-In-Ersatz mit gegenüber dem verglichenen Baustein verbesserter Funktionalität

MAX3227

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Selbe Funktionalität wie der verglichene Baustein bei gleicher Anschlussbelegung

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos