Startseite Schnittstelle RS-485- & RS-422-Transceiver
Startseite
Schnittstelle
RS-485- & RS-422-Transceiver

SN65LBC174A-EP

AKTIV

Optimierte Produktpalette (EP) – vierfach-RS-485/RS-422-differenzielle Leitungstreiber

Jetzt bestellen
Datenblatt

SN65LBC174A-EP

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of receivers 0 Number of transmitters 4 Supply voltage (nom) (V) 5 Signaling rate (max) (MBits) 30 Fault protection (V) -10 to 15 Common-mode range (V) -7 to 12 Number of nodes 32 Isolated No Supply current (max) (µA) 23000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
Number of receivers 0 Number of transmitters 4 Supply voltage (nom) (V) 5 Signaling rate (max) (MBits) 30 Fault protection (V) -10 to 15 Common-mode range (V) -7 to 12 Number of nodes 32 Isolated No Supply current (max) (µA) 23000 Rating HiRel Enhanced Product Operating temperature range (°C) -55 to 125
SOIC (DW) 16 106.09 mm² 10.3 x 10.3 SOIC (DW) 20 131.84 mm² 12.8 x 10.3
  • VID V62/07611
  • Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
  • Signaling rates up to 30 Mbps (1)
  • Propagation delay times < 11 ns
  • Low standby power consumption 1.5-mA max
  • Driver positive- and negative-current limiting
  • Power-up and power-down glitch free for line-insertion applications
  • Thermal shutdown protection
  • Industry standard pinout, compatible with SN75174, MC3487, DS96174, LTC487, and MAX3042
  • Supports defense, aerospace, and medical applications
    • Controlled baseline
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability

(1)The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the unit bits per second (bps).
  • VID V62/07611
  • Designed for TIA/EIA-485, TIA/EIA-422, and ISO 8482 applications
  • Signaling rates up to 30 Mbps (1)
  • Propagation delay times < 11 ns
  • Low standby power consumption 1.5-mA max
  • Driver positive- and negative-current limiting
  • Power-up and power-down glitch free for line-insertion applications
  • Thermal shutdown protection
  • Industry standard pinout, compatible with SN75174, MC3487, DS96174, LTC487, and MAX3042
  • Supports defense, aerospace, and medical applications
    • Controlled baseline
    • One assembly and test site
    • One fabrication site
    • Available in military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification
    • Product traceability

(1)The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the unit bits per second (bps).

The SN65LBC174A-EP is a quadruple differential line driver with tri-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

This device is optimized for balanced multipoint bus transmission at signaling rates up to 30-million bits per second (Mbps). The transmission media may be printed-circuit-board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry, making it suitable for high-speed multipoint applications in noisy environments. The device is designed using LinBiCMOS™ technology, facilitating low power consumption and robustness.

The two enable (EN) inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high impedance to the bus for reduced system loading.

The SN65LBC174A-EP is characterized for operation over the temperature range of –55°C to 125°C.

The SN65LBC174A-EP is a quadruple differential line driver with tri-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 applications.

This device is optimized for balanced multipoint bus transmission at signaling rates up to 30-million bits per second (Mbps). The transmission media may be printed-circuit-board traces, backplanes, or cables. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

Each driver features current limiting and thermal-shutdown circuitry, making it suitable for high-speed multipoint applications in noisy environments. The device is designed using LinBiCMOS™ technology, facilitating low power consumption and robustness.

The two enable (EN) inputs provide pair-wise driver enabling, or can be externally tied together to provide enable control of all four drivers with one signal. When disabled or powered off, the driver outputs present a high impedance to the bus for reduced system loading.

The SN65LBC174A-EP is characterized for operation over the temperature range of –55°C to 125°C.
filter Andere RS-485- & RS-422-Transceiver suchen
Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

open-in-new Alternativen vergleichen
Ähnliche Funktionalität wie verglichener Baustein
SN75174 AKTIV Vierfach-Differenzleitungstreiber Catalog version

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 2
Typ Titel Datum
* Data sheet SN65LBC174A-EP Quadruple RS-485 Differential Line Driver datasheet (Rev. A) PDF | HTML 18 Nov 2019
* VID SN65LBC174A-EP VID V6207611 21 Jun 2016

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
SOIC (DW) 16 Ultra Librarian
SOIC (DW) 20 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos