SN65LBC175A-EP

Name: SN65LBC175A-EP
Brand: TI
SKU: SN65LBC175A-EP
Price: 3.88 USD

AKTIV

Vierfach-RS-485-Differenzleitungsempfänger

Jetzt bestellen

Datenblatt

document-pdfAcrobat SN65LBC175A-EP Quadruple RS-485 Differential Line Receiver datasheet (Englisch) PDF | HTML

SN65LBC175A-EP

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

50

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

32000

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

50

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

32000

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-55 to 125

SOIC (D)

16

59.4 mm² 9.9 x 6

Designed for TIA/EIA-485, TIA/EIA-422 and ISO 8482 Applications
Signaling Rates⁽¹⁾ Exceeding 50 Mbps
Fail-Safe in Bus Short-Circuit, Open-Circuit, and Idle-Bus Conditions
ESD Protection on Bus Inputs Exceeds 6 kV
Common-Mode Bus Input Range –7 V to 12 V
Propagation Delay Times < 18 ns
Low Standby Power Consumption < 32 µA
Pin-Compatible Upgrade for MC3486, DS96F175, LTC489, and SN75175

Designed for TIA/EIA-485, TIA/EIA-422 and ISO 8482 Applications
Signaling Rates⁽¹⁾ Exceeding 50 Mbps
Fail-Safe in Bus Short-Circuit, Open-Circuit, and Idle-Bus Conditions
ESD Protection on Bus Inputs Exceeds 6 kV
Common-Mode Bus Input Range –7 V to 12 V
Propagation Delay Times < 18 ns
Low Standby Power Consumption < 32 µA
Pin-Compatible Upgrade for MC3486, DS96F175, LTC489, and SN75175

The SN65LBC175A-EP is a quadruple differential line receiver with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 (Euro RS-485) applications.

This device is optimized for balanced multipoint bus communication at data rates up to and exceeding 50 million bits per second. The transmission media may be twisted-pair cables, printed-circuit board traces, or backplanes. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The receiver operates over a wide range of positive and negative common-mode input voltages, and features ESD protection to 6 kV, making it suitable for high-speed multipoint data transmission applications in harsh environments. These devices are designed using LinBiCMOS^®, facilitating low power consumption and robustness.

Two EN inputs provide pair-wise enable control, or these can be tied together externally to enable all four drivers with the same signal.

The SN65LBC175A-EP is a quadruple differential line receiver with 3-state outputs, designed for TIA/EIA-485 (RS-485), TIA/EIA-422 (RS-422), and ISO 8482 (Euro RS-485) applications.

This device is optimized for balanced multipoint bus communication at data rates up to and exceeding 50 million bits per second. The transmission media may be twisted-pair cables, printed-circuit board traces, or backplanes. The ultimate rate and distance of data transfer is dependent upon the attenuation characteristics of the media and the noise coupling to the environment.

The receiver operates over a wide range of positive and negative common-mode input voltages, and features ESD protection to 6 kV, making it suitable for high-speed multipoint data transmission applications in harsh environments. These devices are designed using LinBiCMOS^®, facilitating low power consumption and robustness.

Two EN inputs provide pair-wise enable control, or these can be tied together externally to enable all four drivers with the same signal.

filter

Andere RS-485- & RS-422-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Alle anzeigen 3

	Typ	Titel		Datum
*	Data sheet	SN65LBC175A-EP Quadruple RS-485 Differential Line Receiver datasheet	PDF \| HTML	20 Dez 2016
*	VID	SN65LBC175A-EP VID V6217603		27 Mär 2018
*	Radiation & reliability report	SN65LBC175AMDREP Reliability Report		05 Mär 2018

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationsmodell

SN65LBC175A, SN75LBC175A IBIS Model D PKG

SLLC058.ZIP (5 KB) - IBIS Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
SOIC (D)	16	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

SN65LBC175A-EP

Vierfach-RS-485-Differenzleitungsempfänger

SN65LBC175A-EP

Produktdetails

Ähnliche Produkte, die für Sie interessant sein könnten

Ähnliche Funktionalität wie verglichener Baustein

Technische Dokumentation

Design und Entwicklung

SN65LBC175A, SN75LBC175A IBIS Model D PKG

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos