SN75C3222E

Name: SN75C3222E
Brand: TI
SKU: SN75C3222E
Price: 1.165 USD

OBSOLET

3- bis 5,5-V-Dual-Kanal-RS-232-Leitungstreiber/‑Empfänger mit 1 Mbps und +/-15-kV-IEC-ESD-Schutz

Jetzt bestellen

Datenblatt

document-pdfAcrobat 3-V to 5.5-V Multichannel RS-232 Line Drivers and Receiverswith ±15-kV ESD Protection datasheet (Rev. B) (Englisch) PDF | HTML

SN75C3222E

OBSOLET

Datenblatt

Jetzt bestellen

Produktdetails

Drivers per package

2

Receivers per package

2

Logic voltage (min) (V)

3.3

Data rate (max) (Mbps)

1

Main supply voltage (nom) (V)

3.3, 5

Features

Powerdown

ESD HBM (kV)

15

Rating

Catalog

Operating temperature range (°C)

0 to 70

Vout (typ) (V)

5.4

Drivers per package

2

Receivers per package

2

Logic voltage (min) (V)

3.3

Data rate (max) (Mbps)

1

Main supply voltage (nom) (V)

3.3, 5

Features

Powerdown

ESD HBM (kV)

15

Rating

Catalog

Operating temperature range (°C)

0 to 70

Vout (typ) (V)

5.4

TSSOP (PW)

20

41.6 mm² 6.5 x 6.4

ESD Protection for RS-232 bus pins
- ±15-kV Human-body model (HBM)
- ±8-kV IEC 61000-4-2, Contact discharge
- ±15-kV IEC 61000-4-2, Air-gap discharge
Meet or exceed the requirements of TIA/EIA-232-F and ITU v.28 standards
Operate with 3-V to 5.5-V V_CC supply
Operate up to 1000 kbit/s
Two drivers and two receivers
Low standby current . . . 1 µA Typ
External capacitors . . . 4 × 0.1 µF
Accepts 5-V Logic Input with 3.3-V supply

ESD Protection for RS-232 bus pins
- ±15-kV Human-body model (HBM)
- ±8-kV IEC 61000-4-2, Contact discharge
- ±15-kV IEC 61000-4-2, Air-gap discharge
Meet or exceed the requirements of TIA/EIA-232-F and ITU v.28 standards
Operate with 3-V to 5.5-V V_CC supply
Operate up to 1000 kbit/s
Two drivers and two receivers
Low standby current . . . 1 µA Typ
External capacitors . . . 4 × 0.1 µF
Accepts 5-V Logic Input with 3.3-V supply

The SN65C3222E and SN75C3222E consist of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND).

The devices meet the requirements of TIA/EIA-232-F and provide the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at typical data signaling rates up to 1000 kbit/s and are improved drop-in replacements for industry-popular ’3222 two-driver, two-receiver functions.

The SN65C3222E and SN75C3222E can be placed in the power-down mode by setting the power-down ( PWRDOWN) input low, which draws only 1 µA from the power supply. When the devices are powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled; V+ is lowered to V_CC, and V– is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting enable ( EN) high.

The SN65C3222E and SN75C3222E consist of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND).

The devices meet the requirements of TIA/EIA-232-F and provide the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The devices operate at typical data signaling rates up to 1000 kbit/s and are improved drop-in replacements for industry-popular ’3222 two-driver, two-receiver functions.

The SN65C3222E and SN75C3222E can be placed in the power-down mode by setting the power-down ( PWRDOWN) input low, which draws only 1 µA from the power supply. When the devices are powered down, the receivers remain active while the drivers are placed in the high-impedance state. Also, during power down, the onboard charge pump is disabled; V+ is lowered to V_CC, and V– is raised toward GND. Receiver outputs also can be placed in the high-impedance state by setting enable ( EN) high.

filter

Andere RS-232-Transceiver suchen

Herunterladen

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	3-V to 5.5-V Multichannel RS-232 Line Drivers and Receiverswith ±15-kV ESD Protection datasheet (Rev. B)	PDF \| HTML	27 Aug 2021

SN75C3222E

3- bis 5,5-V-Dual-Kanal-RS-232-Leitungstreiber/‑Empfänger mit 1 Mbps und +/-15-kV-IEC-ESD-Schutz

SN75C3222E

Produktdetails

Technische Dokumentation

Bestellen & Qualität