THVD2410V

Name: THVD2410V
Brand: TI
SKU: THVD2410V
Price: 1.798 USD

AKTIV

Halbduplex-RS-485-Transceiver mit 3 bis 5,5 V, 1 Mbit/s, flexibler E/A und 70-V-Busfehlerschutz

Jetzt bestellen

Datenblatt

document-pdfAcrobat THVD24xxV ±70V Fault-Protected 3V to 5.5V RS-485 Transceivers with Flexible I/O Supply and IEC ESD datasheet (Rev. B) (Englisch) PDF | HTML

THVD2410V

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Number of receivers

1

Number of transmitters

1

Duplex

Half

Supply voltage (nom) (V)

3.3, 5

Signaling rate (max) (Mbps)

1

IEC 61000-4-2 contact (±V)

15000

Fault protection (V)

-70 to 70

Common-mode range (V)

-25 to 25

Number of nodes

256

Features

1.65-V I/O supply, Extended common mode, Fault protection, IEC ESD protection, PROFIBUS

Isolated

No

Supply current (max) (µA)

5600

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Number of receivers

1

Number of transmitters

1

Duplex

Half

Supply voltage (nom) (V)

3.3, 5

Signaling rate (max) (Mbps)

1

IEC 61000-4-2 contact (±V)

15000

Fault protection (V)

-70 to 70

Common-mode range (V)

-25 to 25

Number of nodes

256

Features

1.65-V I/O supply, Extended common mode, Fault protection, IEC ESD protection, PROFIBUS

Isolated

No

Supply current (max) (µA)

5600

Rating

Catalog

Operating temperature range (°C)

-40 to 125

VSON (DRC)

10

9 mm² 3 x 3

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
3V to 5.5V RS-485 supply voltage
Differential output exceeds 2.1V for PROFIBUS compatibility with 5V supply
1.65V to 5.5V Supply for logic signal interface
SLR Pin Selectable Data Rates:
- THVD2410V, THVD2412V: 250kbps and 1Mbps
- THVD2450V, THVD2452V: 20Mbps and 50Mbps
Bus I/O protection
- ±70V DC bus fault
- ±16kV HBM ESD
- Half duplex devices: ±15kV IEC 61000-4-2 contact and air-gap discharge
- Full duplex devices: ±8kV IEC 61000-4-2 contact and air-gap discharge
- ±4kV IEC 61000-4-4 fast transient burst
Half-duplex and Full-Duplex devices available in two speed grades
Extended ambient temperature range: -40°C to 125°C
Extended operational common-mode range: ±25V
Enhanced receiver hysteresis for noise immunity
Low power consumption
- Low shutdown supply current: < 5µA
- Quiescent current during operation: < 5.3mA
Glitch-free power-up/down for hot plug-in capability
Open, short, and idle bus failsafe
Thermal shutdown
1/8 unit load (up to 256 bus nodes) in -7V to 12V common mode range
Small 3mm x 3mm VSON package to save board space, or 14-SOIC for drop-in compatibility

Meets or exceeds the requirements of the TIA/EIA-485A and TIA/EIA-422B standards
3V to 5.5V RS-485 supply voltage
Differential output exceeds 2.1V for PROFIBUS compatibility with 5V supply
1.65V to 5.5V Supply for logic signal interface
SLR Pin Selectable Data Rates:
- THVD2410V, THVD2412V: 250kbps and 1Mbps
- THVD2450V, THVD2452V: 20Mbps and 50Mbps
Bus I/O protection
- ±70V DC bus fault
- ±16kV HBM ESD
- Half duplex devices: ±15kV IEC 61000-4-2 contact and air-gap discharge
- Full duplex devices: ±8kV IEC 61000-4-2 contact and air-gap discharge
- ±4kV IEC 61000-4-4 fast transient burst
Half-duplex and Full-Duplex devices available in two speed grades
Extended ambient temperature range: -40°C to 125°C
Extended operational common-mode range: ±25V
Enhanced receiver hysteresis for noise immunity
Low power consumption
- Low shutdown supply current: < 5µA
- Quiescent current during operation: < 5.3mA
Glitch-free power-up/down for hot plug-in capability
Open, short, and idle bus failsafe
Thermal shutdown
1/8 unit load (up to 256 bus nodes) in -7V to 12V common mode range
Small 3mm x 3mm VSON package to save board space, or 14-SOIC for drop-in compatibility

THVD24xxV are ±70V fault-protected, half and full-duplex RS-422/RS-485 transceivers using a 1.65V to 5.5V supply for logic signal interface, and a 3V to 5.5V bus side supply. These devices have slew rate select feature that enables them to be used at two maximum speeds based on the SLR pin setting.

These devices feature integrated IEC ESD protection, eliminating the need for external system-level protection components. Extended ±25V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250-mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.

THVD24xxV are ±70V fault-protected, half and full-duplex RS-422/RS-485 transceivers using a 1.65V to 5.5V supply for logic signal interface, and a 3V to 5.5V bus side supply. These devices have slew rate select feature that enables them to be used at two maximum speeds based on the SLR pin setting.

These devices feature integrated IEC ESD protection, eliminating the need for external system-level protection components. Extended ±25V input common-mode range makes reliable data communication over longer cable run lengths and/or in the presence of large ground loop voltages. Enhanced 250-mV receiver hysteresis provides high noise rejection. In addition, the receiver fail-safe feature makes sure of a logic high when the inputs are open or shorted together.

filter

Andere RS-485- & RS-422-Transceiver suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 1

	Typ	Titel		Datum
*	Data sheet	THVD24xxV ±70V Fault-Protected 3V to 5.5V RS-485 Transceivers with Flexible I/O Supply and IEC ESD datasheet (Rev. B)	PDF \| HTML	05 Mär 2024

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
VSON (DRC)	10	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

THVD2410V

Halbduplex-RS-485-Transceiver mit 3 bis 5,5 V, 1 Mbit/s, flexibler E/A und 70-V-Busfehlerschutz

THVD2410V

Produktdetails

Technische Dokumentation

Design und Entwicklung

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos