Startseite Schnittstelle UARTs
Startseite
Schnittstelle
UARTs

TL16C750E

AKTIV

Einzel-UART mit 128-Byte-FIFOs und automatischer Flusssteuerung

Jetzt bestellen
Datenblatt

TL16C750E

AKTIV
Datenblatt Jetzt bestellen

Produktdetails

Number of channels 1 FIFO (Byte) 128 Rx FIFO trigger levels (#) 4 Tx FIFO trigger levels (#) 4 Programmable FIFO trigger levels Yes CPU interface X86, X86 or 68K Baud rate at Vcc = 2.5 V & with 16x sampling (max) (Mbps) 1.5 Baud rate at Vcc = 1.8 V & with 16x sampling (max) (Mbps) 1 Baud rate at Vcc = 3.3 V & with 16x sampling (max) (Mbps) 3 Baud rate at Vcc = 5 V & with 16x sampling (max) (Mbps) 6 Operating voltage (V) 1.8, 2.5, 3.3, 5 Auto RTS/CTS Yes Rating Catalog Operating temperature range (°C) -40 to 105
Number of channels 1 FIFO (Byte) 128 Rx FIFO trigger levels (#) 4 Tx FIFO trigger levels (#) 4 Programmable FIFO trigger levels Yes CPU interface X86, X86 or 68K Baud rate at Vcc = 2.5 V & with 16x sampling (max) (Mbps) 1.5 Baud rate at Vcc = 1.8 V & with 16x sampling (max) (Mbps) 1 Baud rate at Vcc = 3.3 V & with 16x sampling (max) (Mbps) 3 Baud rate at Vcc = 5 V & with 16x sampling (max) (Mbps) 6 Operating voltage (V) 1.8, 2.5, 3.3, 5 Auto RTS/CTS Yes Rating Catalog Operating temperature range (°C) -40 to 105
TQFP (PFB) 48 81 mm² 9 x 9
  • Supports wide supply voltage range of 1.62 V to 5.5 V
    • 6 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 3 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 2 Mbps (32-MHz oscillator input clock)
      at 3.3 V
    • 1.5 Mbps (24-MHz oscillator input clock)
      at 2.5 V
    • 1 Mbps (16-MHz oscillator Input clock)
      at 1.8 V
  • Characterized for operation from –40°C to 105°C
  • 128-byte transmit or receive FIFO
  • 6-bit fractional baud rate divider
  • Software-selectable baud-rate generator
  • Programmable and selectable transmit and Receive FIFO Trigger Levels for DMA, interrupt generation, and software or hardware flow control
  • Software/Hardware flow control
    • Programmable Xon and Xoff characters with optional Xon any character
    • Programmable Auto-RTS and Auto-CTS-modem control functions (CTS, RTS, DSR, DTR, RI, and CD)
  • DMA signaling capability for both received and transmitted data
  • RS-485 mode support
  • Infrared data association (IrDA) capability
  • Programmable sleep mode
  • Programmable serial interface characteristics
    • 5, 6, 7, or 8-bit characters with 1, 1.5, or 2 stop bit generation
    • Even, odd, or no parity bit generation and detection
  • False start bit and line break detection
  • Internal test and loopback capabilities
  • Supports wide supply voltage range of 1.62 V to 5.5 V
    • 6 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 3 Mbps (48-MHz oscillator input clock)
      at 5 V and 3.3 V
    • 2 Mbps (32-MHz oscillator input clock)
      at 3.3 V
    • 1.5 Mbps (24-MHz oscillator input clock)
      at 2.5 V
    • 1 Mbps (16-MHz oscillator Input clock)
      at 1.8 V
  • Characterized for operation from –40°C to 105°C
  • 128-byte transmit or receive FIFO
  • 6-bit fractional baud rate divider
  • Software-selectable baud-rate generator
  • Programmable and selectable transmit and Receive FIFO Trigger Levels for DMA, interrupt generation, and software or hardware flow control
  • Software/Hardware flow control
    • Programmable Xon and Xoff characters with optional Xon any character
    • Programmable Auto-RTS and Auto-CTS-modem control functions (CTS, RTS, DSR, DTR, RI, and CD)
  • DMA signaling capability for both received and transmitted data
  • RS-485 mode support
  • Infrared data association (IrDA) capability
  • Programmable sleep mode
  • Programmable serial interface characteristics
    • 5, 6, 7, or 8-bit characters with 1, 1.5, or 2 stop bit generation
    • Even, odd, or no parity bit generation and detection
  • False start bit and line break detection
  • Internal test and loopback capabilities

The TL16C750E is a single universal asynchronous receiver transmitter (UART) with 128-byte FIFOs, fractional baud rate support, automatic hardware, software flow control and data rates up to 6 Mbps. The device offers enhanced features such as fractional baud rate and a transmission character control register (TCR) that stores received FIFO threshold level to start or stop transmission during hardware and software flow control automatically without intervention from the CPU.

With the FIFO RDY register, the software gets the status of TXRDY or RXRDY, saving extra GPIO usage. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loop-back capability allows onboard diagnostics. The TL16C750E incorporates the functionality of UART, the UART having its own register set and FIFO.

This version includes the Alternate Function Register (AFR) and this is used to enable some extra functionality beyond the capabilities of the TL16C750 version. One addition is the IrDA mode, which supports Standard IrDA (SIR) mode with baud rates from 2400 to 115.2 kbps. The third addition is support for RS-485 bus drivers or transceivers by providing an output pin (DTRx) per channel, which is timed to keep the RS-485 driver enabled as long as transmit data is pending.

Another name for the UART function is asynchronous communications element (ACE), and these terms are used interchangeably. The bulk of this document describes the behavior of each ACE, with the understanding that two such devices are incorporated into the TL16C750E device.

The TL16C750E is a single universal asynchronous receiver transmitter (UART) with 128-byte FIFOs, fractional baud rate support, automatic hardware, software flow control and data rates up to 6 Mbps. The device offers enhanced features such as fractional baud rate and a transmission character control register (TCR) that stores received FIFO threshold level to start or stop transmission during hardware and software flow control automatically without intervention from the CPU.

With the FIFO RDY register, the software gets the status of TXRDY or RXRDY, saving extra GPIO usage. On-chip status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loop-back capability allows onboard diagnostics. The TL16C750E incorporates the functionality of UART, the UART having its own register set and FIFO.

This version includes the Alternate Function Register (AFR) and this is used to enable some extra functionality beyond the capabilities of the TL16C750 version. One addition is the IrDA mode, which supports Standard IrDA (SIR) mode with baud rates from 2400 to 115.2 kbps. The third addition is support for RS-485 bus drivers or transceivers by providing an output pin (DTRx) per channel, which is timed to keep the RS-485 driver enabled as long as transmit data is pending.

Another name for the UART function is asynchronous communications element (ACE), and these terms are used interchangeably. The bulk of this document describes the behavior of each ACE, with the understanding that two such devices are incorporated into the TL16C750E device.
filter Andere UARTs suchen
Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 1
Typ Titel Datum
* Data sheet TL16C750E UART with 128-Byte FIFO datasheet PDF | HTML 19 Mai 2017

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TL16C750EEVM — TL16C750E 128-Byte FIFO Fractional Baudrate UART-Evaluierungsmodul

This EVM provides the user with the ability to evaluate the TL16C750E device and its features. The EVM includes an onboard 3.3-V LDO as well as level translation for processors which operate at a higher voltage rail.
Benutzerhandbuch: PDF
Nicht verfügbar auf TI.com
Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)
Anfordern
Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Benutzerhandbuch: PDF
View Options
Gehäuse Pins CAD-Symbole, Footprints und 3D-Modelle
TQFP (PFB) 48 Ultra Librarian
Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Alle Forenthemen auf Englisch anzeigen

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos