TUSB564

AKTIV

Linearer Redriver-Crosspoint-Schalter, USB Typ C™ 8,1 Gbit/s DP ALT-Modus für Senkenseite

Jetzt bestellen

Datenblatt

document-pdfAcrobat TUSB564 USB TYPE-C™ DP Alt Mode 8.1 GbpsSink-Side Linear Redriver Crosspoint Switch datasheet (Rev. G) (Englisch) PDF | HTML

TUSB564

AKTIV

Datenblatt

Jetzt bestellen

Produktdetails

Function

Type-C

Type

Active mux

Alternate mode

Yes

External power-path control

No

Data role

UFP

USB speed (MBits)

5000

Rating

Catalog

Dead battery support

No

Operating temperature range (°C)

-40 to 85

Function

Type-C

Type

Active mux

Alternate mode

Yes

External power-path control

No

Data role

UFP

USB speed (MBits)

5000

Rating

Catalog

Dead battery support

No

Operating temperature range (°C)

-40 to 85

WQFN (RNQ)

40

24 mm² 6 x 4

USB Type-C™ crosspoint switch supporting
- USB 3.1 Gen 1 + 2 DP 1.4 lanes
- 4 DP 1.4 lanes
USB 3.1 Gen 1 up to 5 Gbps
DisplayPort 1.4 up to 8.1 Gbps (HBR3)
VESA DisplayPort™ alt mode UFP_D redriving crosspoint switch supporting c, d, and e pin assignments
Ultra-low-power architecture
Linear redriver with up to 12 dB equalization
Transparent to DisplayPort link training
Automatic LFPS de-emphasis control to meet USB 3.1 certification requirements
Configuration through GPIO or I²C
Hot-plug capable
Industrial temperature range: –40°C to 85°C ( TUSB564I)
Commercial temperature range: 0°C to 70°C ( TUSB564)
4 mm × 6 mm, 0.4 mm Pitch WQFN package

USB Type-C™ crosspoint switch supporting
- USB 3.1 Gen 1 + 2 DP 1.4 lanes
- 4 DP 1.4 lanes
USB 3.1 Gen 1 up to 5 Gbps
DisplayPort 1.4 up to 8.1 Gbps (HBR3)
VESA DisplayPort™ alt mode UFP_D redriving crosspoint switch supporting c, d, and e pin assignments
Ultra-low-power architecture
Linear redriver with up to 12 dB equalization
Transparent to DisplayPort link training
Automatic LFPS de-emphasis control to meet USB 3.1 certification requirements
Configuration through GPIO or I²C
Hot-plug capable
Industrial temperature range: –40°C to 85°C ( TUSB564I)
Commercial temperature range: 0°C to 70°C ( TUSB564)
4 mm × 6 mm, 0.4 mm Pitch WQFN package

The TUSB564 s a VESA USB Type-C™ Alt Mode redriving switch supporting USB 3.1 data rates up to 5 Gbps and DisplayPort 1.4 up to 8.1 Gbps for upstream facing port (Sink). The device is used for UFP_D pin assignments C, D, and E from the VESA DisplayPort Alt Mode on USB Type-C Standard.

The TUSB564 provides several levels of receive linear equalization to compensate for inter symbol interference (ISI) due to cable and board trace loss. Operates on a single 3.3-V supply and comes in a commercial temperature range and industrial temperature range.

The TUSB564 s a VESA USB Type-C™ Alt Mode redriving switch supporting USB 3.1 data rates up to 5 Gbps and DisplayPort 1.4 up to 8.1 Gbps for upstream facing port (Sink). The device is used for UFP_D pin assignments C, D, and E from the VESA DisplayPort Alt Mode on USB Type-C Standard.

The TUSB564 provides several levels of receive linear equalization to compensate for inter symbol interference (ISI) due to cable and board trace loss. Operates on a single 3.3-V supply and comes in a commercial temperature range and industrial temperature range.

filter

Andere USB-Typ-C- und USB-Stromversorgungs-ICs suchen

Herunterladen Video mit Transkript ansehen Video

Technische Dokumentation

star

=Von TI ausgewählte Top-Empfehlungen für dieses Produkt

Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.

Alle anzeigen 12

	Typ	Titel		Datum
*	Data sheet	TUSB564 USB TYPE-C™ DP Alt Mode 8.1 GbpsSink-Side Linear Redriver Crosspoint Switch datasheet (Rev. G)	PDF \| HTML	18 Nov 2022
	White paper	A Primer on USB Type-C and Power Delivery Applications and Requirements (Rev. B)	PDF \| HTML	25 Mär 2022
	Application note	TUSB564, HD3SS460 and TS3USBCA410 Pin Assignment C and E Implementation (Rev. A)		17 Dez 2018
	Technical article	How to select the right USB Type-C™ signal switches	PDF \| HTML	20 Mär 2018
	White paper	Strengthening the USB Type-C signal chain through redrivers		21 Aug 2017
	Technical article	How to deliver clean USB Type-C™ signals	PDF \| HTML	07 Aug 2017
	Technical article	How to correct 10Gbps performance issues with a USB Type-C™ active redriver multip	PDF \| HTML	01 Dez 2016
	Technical article	Why use a USB Type-C™ redriver in your personal electronics designs?	PDF \| HTML	25 Okt 2016
	White paper	Alternate Mode for USB Type-C™: Going Beyond USB		26 Sep 2016
	Technical article	How USB will enable the future of automotive infotainment	PDF \| HTML	08 Okt 2015
	White paper	Transition existing products from USB 2.0 OTG to USB Type-C		10 Jul 2015
	White paper	Low-cost implementation of USB Type-C		07 Jul 2015

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TUSB564RNQEVM — Redriving-Schalter für USB-Typ-C/VESA DP Alt-Modus – Evaluierungsmodul

The TUSB564RNQEVM can be used with an Alternate Mode Type-C Source such as the TUSB546 EVM and/or USB or DisplayPort Type-C Host system to evaluate the Type C implementation.

Benutzerhandbuch: PDF

Nicht verfügbar auf TI.com

Simulationsmodell

TUSB564 IBIS-AMI Model

SLLM412.ZIP (4997 KB) - IBIS-AMI Model

Herunterladen

Simulationstool

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

PSpice® für TI ist eine Design- und Simulationsumgebung, welche Sie dabei unterstützt, die Funktionalität analoger Schaltungen zu evaluieren. Diese voll ausgestattete Design- und Simulationssuite verwendet eine analoge Analyse-Engine von Cadence®. PSpice für TI ist kostenlos erhältlich und (...)

Anfordern

Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Benutzerhandbuch: PDF

View Options

Gehäuse	Pins	CAD-Symbole, Footprints und 3D-Modelle
WQFN (RNQ)	40	Ultra Librarian

Es gelten die allgemeinen Geschäftsbedingungen von TI für Evaluierungsartikel.

TUSB564

Linearer Redriver-Crosspoint-Schalter, USB Typ C™ 8,1 Gbit/s DP ALT-Modus für Senkenseite

TUSB564

Produktdetails

Technische Dokumentation

Design und Entwicklung

TUSB564RNQEVM — Redriving-Schalter für USB-Typ-C/VESA DP Alt-Modus – Evaluierungsmodul

TUSB564 IBIS-AMI Model

PSPICE-FOR-TI — PSpice® für TI Design-und Simulationstool

TINA-TI — SPICE-basiertes analoges Simulationsprogramm

Bestellen & Qualität

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Videoreihe

Videos