Ejemplo de código o demostración
CC1120
Transceptor inalámbrico menor a 1 GHz de rendimiento alto para sistemas de banda estrecha
Hoja de datos
CC1120
- High-Performance, Single-Chip Transceiver
- Adjacent Channel Selectivity:
64 dB at 12.5-kHz Offset - Blocking Performance: 91 dB at 10 MHz
- Excellent Receiver Sensitivity:
- –123 dBm at 1.2 kbps
- –110 dBm at 50 kbps
- –127 dBm Using Built-in Coding Gain
- Very Low Phase Noise:
–111 dBc/Hz at 10-kHz Offset
- Adjacent Channel Selectivity:
- Suitable for Systems Targeting ETSI Category 1
Compliance in 169-MHz and 433-MHz Bands - High Spectral Efficiency (9.6 kbps in 12.5-kHz
Channel in Compliance With FCC Narrowbanding
Mandate) - Separate 128-Byte RX and TX FIFOs
- Support for Seamless Integration With the CC1190
Device for Increased Range Giving up to 3-dB
Improvement in Sensitivity and up to +27-dBm
Output Power - Power Supply
- Wide Supply Voltage Range (2.0 V to 3.6 V)
- Low Current Consumption:
- RX: 2 mA in RX Sniff Mode
- RX: 17 mA Peak Current in Low-Power
Mode - RX: 22 mA Peak Current in
High-Performance Mode - TX: 45 mA at +14 dBm
- Power Down: 0.12 µA
(0.5 µA With eWOR Timer Running)
- Programmable Output Power up to +16 dBm With
0.4-dB Step Size - Automatic Output Power Ramping
- Configurable Data Rates: 0 to 200 kbps
- Supported Modulation Formats: 2-FSK,
2-GFSK, 4-FSK, 4-GFSK, MSK, OOK - WaveMatch: Advanced Digital Signal Processing
for Improved Sync Detect Performance - RoHS-Compliant 5-mm × 5-mm No-Lead QFN
32-Pin Package (RHB) - Regulations – Suitable for Systems Targeting
Compliance With- Europe: ETSI EN 300 220, ETSI EN 54-25
- US: FCC CFR47 Part 15, FCC CFR47 Part 90,
24, and 101 - Japan: ARIB RCR STD-T30,
ARIB STD-T67, ARIB STD-T108
- Peripherals and Support Functions
- Enhanced Wake-On-Radio (eWOR)
Functionality for Automatic Low-Power Receive
Polling - Includes Functions for Antenna Diversity Support
- Support for Retransmissions
- Support for Automatic Acknowledge of Received
Packets - TCXO Support and Control, Also in Power
Modes - Automatic Clear Channel Assessment (CCA) for
Listen-Before-Talk (LBT) Systems - Built-in Coding Gain Support for Increased
Range and Robustness - Digital RSSI Measurement
- Temperature Sensor
- Enhanced Wake-On-Radio (eWOR)
The CC1120 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for Industrial, Scientific, and Medical (ISM) applications and Short Range Device (SRD) frequency bands at 164 to 192 MHz, 274 to 320 MHz, 410 to 480 MHz, and 820 to 960 MHz.
The CC1120 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and wake-on-radio. The main operating parameters of the CC1120 device can be controlled through an SPI interface. In a typical system, the CC1120 device is used with a microcontroller and only a few external passive components.
Documentación técnica
No se encontraron resultados. Borre su búsqueda y vuelva a intentarlo.
Ver todo 36 Diseño y desarrollo
Para conocer los términos adicionales o los recursos necesarios, haga clic en cualquier título de abajo para ver la página de detalles cuando esté disponible.
Placa de evaluación
BOOSTXL-CC1120-90 — BoosterPack para aplicaciones de 902 MHz a 928 MHz
The CC1120-CC1190 BoosterPack™ module is designed to use with the MSP-EXP430F5529 and MSP-EXP430G2553 LauchPad™ development kits and to work as a stand-alone module by using SmartRF Studio application software. The module is equipped with an integrated PCB trace antenna which (...)
Placa de evaluación
SMARTRFTRXEBK — Placa de evaluación del transceptor SmartRF
The SmartRF Transceiver Evaluation Board (TrxEB) is intended to be used together with Texas Instruments’ low-power RF transceivers for evaluation, performance testing and software development.
The following transceiver evaluation modules are supported:
- CC1101EM*
- CC11xLEM*
- CC112xEM*
- CC1175EM*
- CC1200EM*
- (...)
Guía del usuario: PDF
Placa de evaluación
RDCR-3P-RADIO-MOD — Módulos de radio integrados Radiocrafts
Radiocrafts’ standard RF modules provide compact, easy-to-use, low cost, low power and high-performance RF solutions for a large number of wireless applications using license-free ISM bands (169 MHz – 2.4 GHz). Using modules, OEM manufacturers without RF design knowledge can easily add (...)
Desde: Radiocrafts AS
Tarjeta secundaria
CC1120EMK-169 — Kit de módulo de evaluación de CC1120 169 MHz
The CC1120 Evaluation Module Kit for 169MHz can be used in conjunction with the CC1120 Development Kit to evaluate the performance of the Perfomance Line RF-IC at this particular frequency. The CC1120DK is required for operation and needs to be ordered separately.
This is not available in the (...)
Tarjeta secundaria
CC1120EMK-420-470 — Kit de módulo de evaluación de CC1120 420-470 MHz
The CC1120 Evaluation Module Kit for 420-470 MHz can be used in conjunction with the CC1120 Development Kit to evaluate the performance of the Perfomance Line RF-IC at this particular frequency. The CC1120DK is required for operation and needs to be ordered separately.
This CC1120 Evaluation Module (...)
Tarjeta secundaria
CC1120EMK-868-915 — Kit de módulo de evaluación de CC1120 868-915 MHz
The CC1120 Evaluation Module Kit for 868-915 MHz can be used in conjunction with the CC1120 Development Kit to evaluate the operation of the Perfomance Line RF-IC at these particular frequency bands. The CC1120DK is required for operation and needs to be ordered separately.
Sonda de depuración
CC-DEBUGGER — Depurador y programador para sistema en chips RF
The CC Debugger is a small programmer and debugger for the TI Low Power RF System-on-Chips. It can be used together with IAR Embedded Workbench for 8051 (version 7.51A or later) for debugging and SmartRF Flash Programmer for flash programming. The CC Debugger can also be used for controlling (...)
Guía del usuario: PDF
Adaptador de interfaz
BOOST-CCEMADAPTER — Adaptador EM BoosterPack
The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the wide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific software is provided, so it is up to the user to write the (...)
Software de aplicación y estructura
WMBUS — Software de protocolo M-BUS inalámbrico
La norma M-Bus inalámbrica (EN13757-4:2014-2) especifica la comunicación por radiofrecuencia (RF) entre los medidores de agua, gas, calefacción y electricidad y los dispositivos de recolección de datos. Tiene una aceptación generalizada en Europa para aplicaciones de medición inteligente o (...)
Soporte de software
PACKET-SNIFFER — SmartRF™ Packet Sniffer 2.18.1
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
Productos y hardware compatibles
Productos
Productos de 2.4 GHz de baja potencia
MCU inalámbricas Sub-1 GHz
Transceptores Sub-1 GHz
Otros productos inalámbricos
Productos de conectividad inalámbrica automotriz
Desarrollo de hardware
Placa de evaluación
Kit de desarrollo
Software
Herramienta de programación de software
Herramienta de cálculo
Controlador o biblioteca
Soporte de software
RF-RANGE-ESTIMATOR — RF Range Estimator
This tool is used to calculate a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation (...)
Productos y hardware compatibles
Productos
Productos de 2.4 GHz de baja potencia
MCU inalámbricas Sub-1 GHz
Transceptores Sub-1 GHz
Productos de conectividad inalámbrica automotriz
Desarrollo de hardware
Placa de evaluación
Software
Herramienta de cálculo
Soporte de software
SWRC219 — TrxEB RF PER Test Software
Productos y hardware compatibles
Productos
Transceptores Sub-1 GHz
Desarrollo de hardware
Kit de desarrollo
Símbolo CAD/CAE
CC112x–CC1190 BoosterPack 915/868 MHz Reference Design (Rev. A)
SWRR145A.ZIP (4039 KB)
Herramienta de cálculo
PACKET-SNIFFER-2 — SmartRF Packet Sniffer 2
The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
Productos y hardware compatibles
Productos
Productos de 2.4 GHz de baja potencia
MCU inalámbricas Sub-1 GHz
Transceptores Sub-1 GHz
Desarrollo de hardware
Placa de evaluación
Kit de desarrollo
Herramienta de cálculo
SMARTRF-STUDIO-7 — SmartRF Studio
SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
Productos y hardware compatibles
Productos
Microcontroladores MSP430
Productos de 2.4 GHz de baja potencia
MCU inalámbricas Sub-1 GHz
Transceptores Sub-1 GHz
Otros productos inalámbricos
Productos de conectividad inalámbrica automotriz
Desarrollo de hardware
Kit de desarrollo
Placa de evaluación
Adaptador de interfaz
Tarjeta secundaria
Herramienta de diseño
3P-WIRELESS-MODULES — Herramienta de búsqueda de módulos inalámbricos de terceros
The third party wireless module search tool helps developers to identify products that meet their end equipment specifications and procure production ready wireless modules. The third party module vendors included in the search tool are independent third party companies with expertise in designing (...)
Herramienta de diseño
SIMPLELINK-SUB1GHZ-DESIGN-REVIEWS — Revisiones de diseño de hardware para dispositivos SimpleLink™ CC1xxx
To get started with the SimpleLink™ Sub-1GHz hardware design review process:
- Step 1: Before requesting a review, it is important that to review the technical documentation and design & development resources available on the corresponding product page (see CC1xxx product page links below).
- Step 2: (...)
Diseños de referencia
TIDC-FCC-COMPLIANT-LRM-WITH-CC1120 — Diseño de referencia de modo de largo alcance compatible con FCC 15.247, con transceptor de RF CC112
This reference design provides a software example which implements a frequency-hopping driver for the CC112x and CC1200 family of devices. The driver is written to enable users to make IoT wireless applications that are compliant with FCC Part 15.247 frequency-hopping system and also allows long (...)
Esquema: PDF
Diseños de referencia
TIDA-00676 — Diseño de referencia de la solución de alimentación para medidores de funcionamiento por batería con
Esta solución de gestión de energía que proporciona 900 mA a 3.6 V desde varios tipos de baterías para aplicaciones de medición de flujo inteligente (medidores de gas y agua residenciales). TIDA-00676 incluye un ETSI Cat. Un subsistema de radiofrecuencia (RF) con capacidad para receptor para wM-Bus (...)
Diseños de referencia
CC1120EM-169-RD — Diseño de referencia de CC1120EM 169 MHz
This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the169 MHz frequency band.
Diseños de referencia
CC1120EM-868-915-RD — Diseño de referencia de CC1120EM 868/915 MHz
This RF Layout Reference Design demonstrates good decoupling and layout techniques for a low power RF device operating in the 868 MHz and 915 MHz frequency bands.
Esquema: PDF
Diseños de referencia
TIDC-CC1120-LRM-420-470MHZ — Diseño de referencia de largo alcance inalámbrico menor a 1 GHz con CC1120 (420 MHz a 470 MHz)
Narrowband is an industry standard way to get long range RF communication with higher immunity to interference versus wide band solutions. Use this reference design to test out the longest range solution from TI for your Internet of Things (IoT) applications. The tool for 420 to 470 (...)
Diseños de referencia
TIDC-CC1120-LRM-868-915MHZ — Diseño de referencia de largo alcance inalámbrico menor a 1 GHz con CC1120 (868 MHz a 915 MHz)
Narrowband is an industry standard way to get long range RF communication with higher immunity to interference versus wide band solutions. Use this reference design to test out the longest range solution from TI for your Internet of Things (IoT) applications. The tool for 868 to 915 MHz uses (...)
Diseños de referencia
TIDC-MULTIBAND-WMBUS — Diseño de referencia de subsistema RF de bus WM multibanda (169 MHz, 433 MHz y 868 MHz) con LCD segm
La placa de circuito impreso única TIDC-MULTIBANDA-wMBUS cubre las tres bandas de frecuencia wM-Bus con solo unos pocos cambios de valor de los componentes. Es un sistema de muy baja potencia y ETSI Cat. 1 subsistema de radiofrecuencia (RF) con capacidad como receptor para sistemas wM-Bus de (...)
Diseños de referencia
TIDC-WMBUS-169MHZ — ETSI Cat. Un subsistema RF de bus wM y 169 MHz, con capacidad como receptor para medidores inteligen
Este diseño de referencia es un ETSI Cat de muy baja potencia. Un subsistema RF con capacidad como receptor para medidores inteligentes de gas y agua habilitados para wM-Bus a 169 MHz. Proporciona números de bloqueo, selectividad y sensibilidad RX líderes del mercado para todos los modos N de (...)
Diseños de referencia
TIDM-LPBP-EMADAPTER — Adaptador del módulo de evaluación (EM)
This BoosterPack kit contains one "EM Adapter BoosterPack". The purpose of the EM adapter board is to provide an-easy-to-use bridge between any of the TI MCU LaunchPads and the vide variety of TI RF evaluation modules (EM), for instance the CCxxxx Low-Power RF evaluation modules. No specific (...)
Esquema: PDF
| Encapsulado | Pines | Símbolos CAD, huellas y modelos 3D |
|---|---|---|
| VQFN (RHB) | 32 | Ultra Librarian |
Pedidos y calidad
Información incluida:
- RoHS
- REACH
- Marcado del dispositivo
- Acabado de plomo/material de la bola
- Clasificación de nivel de sensibilidad a la humedad (MSL) / reflujo máximo
- Estimaciones de tiempo medio entre fallas (MTBF)/fallas en el tiempo (FIT)
- Contenido del material
- Resumen de calificaciones
- Monitoreo continuo de confiabilidad
Información incluida:
- Lugar de fabricación
- Lugar de ensamblaje
Los productos recomendados pueden tener parámetros, módulos de evaluación o diseños de referencia relacionados con este producto de TI.
Soporte y capacitación
Foros de TI E2E™ con asistencia técnica de los ingenieros de TI
El contenido lo proporcionan “tal como está” TI y los colaboradores de la comunidad y no constituye especificaciones de TI. Consulte los términos de uso.
Si tiene preguntas sobre la calidad, el paquete o el pedido de productos de TI, consulte el soporte de TI.