REF3425-EP
- Initial accuracy: ±0.05% (maximum)
- Temperature coefficient: 10 ppm/°C (maximum)
- Output current: ±10 mA
- Low quiescent current: 95 µA (maximum)
- Wide input voltage: 12 V
- Output 1/f noise (0.1 Hz to 10 Hz): 3.8 µVPP/V
- Small footprint 6-pin SOT-23 package
- Excellent long-term stability 25 ppm/1000 hrs
- Supports defense, aerospace, and medical applications:
- Controlled baseline
- One assembly/test site
- One fabrication site
- Available extended (–55°C to 125°C) temperature range
- Extended product life cycle
- Extended product-change notification
- Product traceability
The REF34xx-EP device is a low temperature drift
(10 ppm/°C), low-power, high-precision CMOS voltage reference, featuring ±0.05% initial accuracy, low operating current with power consumption less than 95 µA. This device also offers very low output noise of 3.8 µVp-p/V, which enables its ability to maintain high signal integrity with high-resolution data converters in noise critical systems. With a small SOT-23 package, REF34xx-EP offers enhanced specifications and pin-to-pin replacement for MAX607x and ADR34xx. The REF34xx-EP family is compatible to most ADC and DAC.
Stability and system reliability are further improved by the low output-voltage hysteresis of the device and low long-term output voltage drift. The small size and low operating current of the devices (95 µA) can benefit portable and battery-powered applications.
REF34xx-EP is specified for the wide temperature range of –55°C to 125°C. Contact the TI sales representative for additional voltage options.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | REF34xx-EP Low-Drift, Low-Power, Small-Footprint Series Voltage Reference datasheet (Rev. B) | PDF | HTML | 2019/04/18 |
| * | Radiation & reliability report | REF34xx-EP Reliability Report | 2019/01/29 | |
| Application note | Voltage Reference Selection and Design Tips For Data Converters (Rev. B) | PDF | HTML | 2024/01/09 | |
| E-book | Tips and tricks for designing with voltage references (Rev. A) | 2021/05/07 | ||
| Application note | Long-Term Drift in Voltage References | PDF | HTML | 2021/03/25 | |
| White paper | Simplifying Signal Chain Design for High Performance in Small Systems | 2020/10/22 | ||
| Application note | Precision Current Sources and Sinks Using Voltage References | 2020/06/30 | ||
| Application note | Low-Noise Negative Reference Design with REF5025 | 2019/12/01 | ||
| Application brief | Voltage Reference Solutions in Motor Control Drives | 2019/07/29 | ||
| E-book | Voltage Supervisor and Reset ICs: Tips, Tricks and Basics | 2019/06/28 | ||
| White paper | Voltage reference selection basics white paper (Rev. A) | 2018/10/23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치