이 제품의 최신 버전이 있습니다
TPS40170-Q1
- New, similar products available:
- Qualified for automotive applications
- AEC-Q100 qualified with the following results
- Device temperature grade 1: –40°C to 125°C ambient operating temperature range
- Device HBM ESD classification level 1C
- Device CDM ESD classification level C4B
- Wide-input voltage range from 4.5 V to 60 V
- 600-mV reference voltage with 1% accuracy
- Programmable UVLO and hysteresis
- Voltage-mode control with voltage feed-forward
- Programmable frequency between 100 kHz and 600 kHz
- Bidirectional frequency synchronization with primary and secondary option
- Low-side FET sensing overcurrent protection and high-side fet sensing short-circuit protection with integrated thermal compensation
- Programmable closed-loop soft start
- Supports pre-biased outputs
- Thermal shutdown at 165°C with hysteresis
- Voltage tracking
- Power good
- ENABLE with 1-µA low-current shutdown
- 8-V and 3.3-V LDO output
- Integrated bootstrap diode
- 20-pin 4.5-mm × 3.5-mm VQFN (RGY) package
The TPS40170-Q1 device is a full-featured, synchronous PWM buck controller that operates at an input voltage between 4.5 V and 60 V and is optimized for high-power-density, high-reliability dc-dc converter applications. The controller implements voltage-mode control with input-voltage feed-forward compensation that enables instant response to an input voltage change. The switching frequency is programmable from 100 kHz to 600 kHz.
The TPS40170-Q1 device has a complete set of system protection and monitoring features such as programmable UVLO, programmable overcurrent protection (OCP) by sensing the low-side FET, selectable short-circuit protection (SCP) by sensing the high-side FET, and thermal shutdown. The ENABLE pin allows for system shutdown in a low-current (1-µA typical) mode. The controller supports pre-biased output, provides an open-drain PGOOD signal, and has closed-loop soft-start, output-voltage tracking, and adaptive dead-time control.
The TPS40170-Q1 device provides accurate output-voltage regulation within 1% accuracy. Additionally, the controller implements a novel scheme of bidirectional synchronization with one controller acting as the primary and other downstream controllers acting as secondaries, synchronized to the primary in-phase or 180° out-of-phase. Secondary controllers can be synchronized to an external clock within ±30% of the free-running switching frequency.
New products (LM5145-Q1 and LM5146-Q1) offer reduced BOM cost, higher efficiency, and reduced design size among many other features.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TPS40170-Q1 Automotive 4.5-V to 60-V, Wide-Input, Synchronous PWM Buck Controller datasheet (Rev. C) | PDF | HTML | 2023/11/03 |
| Selection guide | Automotive Infotainment EE Buck Converter/Controller Selection Guide (Rev. B) | 2021/04/15 | ||
| White paper | An overview of radiated EMI specifications for power supplies | 2018/06/05 | ||
| White paper | An overview of conducted EMI specifications for power supplies | 2018/02/01 | ||
| Application brief | Improve DC/DC Regulator EMI for Free with Optimized Power Stage Layout | 2017/11/13 | ||
| EVM User's guide | TPS40170 with NexFETs 24-V Input, 5 V at 10-A Output Synchronous Buck EVM | 2014/02/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TPS40170EVM-578 — TPS40170 동기식 PWM 벅 컨트롤러용 평가 모듈
TPS40170 TINA-TI Transient Reference Design
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| VQFN (RGY) | 20 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치