홈 전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)
홈
전원 관리
AC/DC 및 DC/DC 컨버터(통합 FET)

TPS568230

활성

솔루션 비용에 최적화된 4.5V~18V, 8A 동기식 SWIFT™ 벅 컨버터

지금 주문
데이터 시트

TPS568230

활성
데이터 시트 지금 주문

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 8 Vin (min) (V) 4.5 Vin (max) (V) 18 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Features Enable, Forced PWM, Light Load Efficiency, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 7 Iq (typ) (µA) 110 Duty cycle (max) (%) 85
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 8 Vin (min) (V) 4.5 Vin (max) (V) 18 Switching frequency (min) (kHz) 600 Switching frequency (max) (kHz) 1000 Features Enable, Forced PWM, Light Load Efficiency, Over Current Protection, Power good, Soft Start Adjustable, Synchronous Rectification Control mode D-CAP3 Vout (min) (V) 0.6 Vout (max) (V) 7 Iq (typ) (µA) 110 Duty cycle (max) (%) 85
VQFN-HR (RJE) 20 9 mm² 3 x 3
  • Input voltage range: 4.5 V to 18 V
  • D-CAP3™ architecture control for fast transient response
  • Output voltage range: 0.6 V to 7 V
  • 0.6-V±1% reference voltage (25°C)
  • Supports 8-A continuous output current
  • Integrated 19.5-mΩ and 9.5-mΩ RDS(on) internal power MOSFET
  • ULQ™(Ultra Low Quiescent current) feature to enable long battery life
  • Selectable operation modes:
    • Forced continuous conduction mode (FCCM)
    • Out-of-Audio™(OOA) Mode
    • Advanced Eco-Mode™
  • Selectable 600-kHz, 800-kHz and 1-MHz switching frequency
  • Supports up to 90% duty operation
  • Adjustable soft start time by SS pin
  • Power good output
  • Built-in output discharge function
  • Cycle-by-cycle over current protection
  • Non-latched for fault protection
  • Small 3.0-mm × 3.0-mm HotRod™ QFN package
  • Input voltage range: 4.5 V to 18 V
  • D-CAP3™ architecture control for fast transient response
  • Output voltage range: 0.6 V to 7 V
  • 0.6-V±1% reference voltage (25°C)
  • Supports 8-A continuous output current
  • Integrated 19.5-mΩ and 9.5-mΩ RDS(on) internal power MOSFET
  • ULQ™(Ultra Low Quiescent current) feature to enable long battery life
  • Selectable operation modes:
    • Forced continuous conduction mode (FCCM)
    • Out-of-Audio™(OOA) Mode
    • Advanced Eco-Mode™
  • Selectable 600-kHz, 800-kHz and 1-MHz switching frequency
  • Supports up to 90% duty operation
  • Adjustable soft start time by SS pin
  • Power good output
  • Built-in output discharge function
  • Cycle-by-cycle over current protection
  • Non-latched for fault protection
  • Small 3.0-mm × 3.0-mm HotRod™ QFN package

The TPS568230 is a cost effective, high-voltage input, high efficiency synchronous buck converter with integrated MOSFETs.

The TPS568230 has the ULQ™ (Ultra Low Quiescent current) feature to enable low-bias current. It operates with supply input voltage from 4.5 V to 18 V. It uses DCAP3™ control mode to provide fast transient response, good line, load regulation, no requirement for external compensation, and support low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors.

The TPS568230 provides complete Over-voltage, Under-voltage, Over-current, Over-temperature and Under-voltage lock-out protections. It is combined power good signal , output discharge function and large duty operation feature.

TPS568230 is equipped with a MODE pin to select the desirable mode of operation. To attain high efficiency at light load, OOA mode and Advanced Eco-mode™ could be selected. OOA mode will not allow the part to go below audible frequency ( below 25kHz switching frequency ). FCCM is also available to support tight output voltage ripple requirement.

The TPS568230 supports both internal and external soft-start time option. The internal fixed soft-start time is 1.3 ms. Longer soft-start time can be get by connecting the external capacitor on SS pin.

The TPS568230 is available in a 20-pin 3.0-mm x 3.0-mm HotRod™ package and the junction temperature is specified from -40oC to 125oC.

The TPS568230 is a cost effective, high-voltage input, high efficiency synchronous buck converter with integrated MOSFETs.

The TPS568230 has the ULQ™ (Ultra Low Quiescent current) feature to enable low-bias current. It operates with supply input voltage from 4.5 V to 18 V. It uses DCAP3™ control mode to provide fast transient response, good line, load regulation, no requirement for external compensation, and support low equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors.

The TPS568230 provides complete Over-voltage, Under-voltage, Over-current, Over-temperature and Under-voltage lock-out protections. It is combined power good signal , output discharge function and large duty operation feature.

TPS568230 is equipped with a MODE pin to select the desirable mode of operation. To attain high efficiency at light load, OOA mode and Advanced Eco-mode™ could be selected. OOA mode will not allow the part to go below audible frequency ( below 25kHz switching frequency ). FCCM is also available to support tight output voltage ripple requirement.

The TPS568230 supports both internal and external soft-start time option. The internal fixed soft-start time is 1.3 ms. Longer soft-start time can be get by connecting the external capacitor on SS pin.

The TPS568230 is available in a 20-pin 3.0-mm x 3.0-mm HotRod™ package and the junction temperature is specified from -40oC to 125oC.

filter 기타 AC/DC 및 DC/DC 컨버터(통합 FET) 찾기
다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS51396A 활성 4.5V~24V, 8A 동기식 강압 전압 레귤레이터 Offers wider VIN, optimized for lower IOUT.
TPS56C230 활성 솔루션 비용에 최적화된 4.5V~18V, 12A 동기식 SWIFT™ 벅 컨버터 Optimized for higher current.
비교 대상 장치와 유사한 기능
TPS568231 활성 D-CAP3 제어를 지원하는 3.8V~17V, 8A 동기식 벅 컨버터 Higher efficiency and thermal performance 8A converter
TPS568236 활성 온 타임 D-CAP3 ™ 제어 모드를 지원하는 4.5V~18V 입력, 8A 동기식 스텝다운 전압 레귤레이터 Smaller-size 600KHz switching-frequency 8A converter

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
13개 모두 보기
유형 직함 날짜
* Data sheet TPS568230 4.5-V to 18-V Input, 8-A Synchronous Step-Down Voltage Regulator datasheet (Rev. C) PDF | HTML 2019/08/08
Application note How the Switching Frequency Affects the Performance of Buck Converter (Rev. A) PDF | HTML 2024/04/16
Application note Peak Current Mode Converter Secondary Stage Filter Design for Low Ripple Power – Part II: Hybrid Sense Network PDF | HTML 2024/02/27
Application note 8-A DC/DC Buck Converter Selection Guide of Mid-range VIN (1.5 V - 28 V) PDF | HTML 2023/10/06
Application note Measuring the Bode Plot of D-CAP™, D-CAP2™, and D-CAP3™ DC/DC Converters (Rev. A) PDF | HTML 2023/04/21
Application note Stability Analysis and Design of D-CAP2 and D-CAP3 Converter – Part 2 PDF | HTML 2021/08/02
EVM User's guide TPS568230 Buck Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021/06/24
Application note Stability Analysis and Design of D-CAP2 and D-CAP3 Converter – Part 1 PDF | HTML 2021/06/09
Selection guide Buck Converter Quick Reference Guide (Rev. B) 2021/04/08
Certificate TPS568230EVM EU RoHS Declaration of Conformity (DoC) 2020/09/17
Application note Large Duty Cycle Operation With the TPS568230 2020/03/31
Technical article How to choose a DC/DC converter for a storage application PDF | HTML 2019/05/09
Application note Understanding OOA Operation Mode 2019/02/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS568230EVM — 8A 동기 스텝다운 전압 레귤레이터 평가 모듈

The TPS568230 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS568230 step-down converters. The TPS568230EVM operates from 4.5-V to 18-V input (12-V nominal) and provides a 1.05-V, 8-A output. Several jumpers and switches allow user to evaluate different (...)
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS568230 PSpice Transient Model

SLVMCZ2.ZIP (100 KB) - PSpice Model
다운로드
패키지 핀 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RJE) 20 Ultra Librarian
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상