전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS62063

활성

3MHz, 1.6A 스텝다운 컨버터(2x2mm SON 패키지, Vout=3.3V)

alarm알림 지금 주문

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS628512 활성 SOT583 패키지의 2.7V~6V, 2A 고정 주파수 스텝다운 컨버터 Smaller SOT583 package, pin-to-pin compatible family 0.5 A, 1 A, 2 A

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck Type Converter Iout (max) (A) 1.6 Vin (min) (V) 3.3 Vin (max) (V) 6 Switching frequency (min) (kHz) 2600 Switching frequency (max) (kHz) 3400 Features Enable, Forced PWM, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, ULVO Fixed EMI features Spread Spectrum Control mode Voltage mode Vout (min) (V) 3.3 Vout (max) (V) 3.3 Iq (typ) (µA) 18 Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck Type Converter Iout (max) (A) 1.6 Vin (min) (V) 3.3 Vin (max) (V) 6 Switching frequency (min) (kHz) 2600 Switching frequency (max) (kHz) 3400 Features Enable, Forced PWM, Light load efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Spread Spectrum, Synchronous Rectification, ULVO Fixed EMI features Spread Spectrum Control mode Voltage mode Vout (min) (V) 3.3 Vout (max) (V) 3.3 Iq (typ) (µA) 18 Duty cycle (max) (%) 100
WSON (DSG) 8 4 mm² 2 x 2
  • 3-MHz Switching Frequency
  • VIN Range from 2.7 V to 6 V
  • 1.6-A Output Current
  • Up to 97% Efficiency
  • Power Save Mode and 3-MHz Fixed PWM Mode
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Output Discharge Function
  • Typical 18-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Voltage Positioning
  • Clock Dithering
  • Supports Maximum 1-mm Height Solutions
  • Available in a 2 mm × 2 mm × 0.75 mm WSON
  • APPLICATIONS
    • Point of Load (POL)
    • Notebooks, Pocket PCs
    • Portable Media Players
    • DSP Supplies

All other trademarks are the property of their respective owners

  • 3-MHz Switching Frequency
  • VIN Range from 2.7 V to 6 V
  • 1.6-A Output Current
  • Up to 97% Efficiency
  • Power Save Mode and 3-MHz Fixed PWM Mode
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Output Discharge Function
  • Typical 18-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Voltage Positioning
  • Clock Dithering
  • Supports Maximum 1-mm Height Solutions
  • Available in a 2 mm × 2 mm × 0.75 mm WSON
  • APPLICATIONS
    • Point of Load (POL)
    • Notebooks, Pocket PCs
    • Portable Media Players
    • DSP Supplies

All other trademarks are the property of their respective owners

The TPS6206x is a family of highly efficient synchronous step-down DC-DC converters. They provide up to 1.6-A output current.

With an input voltage range of 2.7 V to 6 V, the device is a perfect fit for power conversion from a single Li-Ion battery as well from 5-V or 3.3-V system supply rails. The TPS6206x operates at 3-MHz fixed frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range. The power save mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high.

In the shutdown mode, the current consumption is reduced to less than 1 µA and an internal circuit discharges the output capacitor.

TPS6206x family is optimized for operation with a tiny 1-µH inductor and a small 10-µF output capacitor to achieve smallest solution size and high regulation performance.

The TPS6206x operates over a free air temperature of –40°C to 85°C. The device is available in a small 2-mm × 2-mm × 0.75-mm 8-pin WSON PowerPAD integrated circuit package.

The TPS6206x is a family of highly efficient synchronous step-down DC-DC converters. They provide up to 1.6-A output current.

With an input voltage range of 2.7 V to 6 V, the device is a perfect fit for power conversion from a single Li-Ion battery as well from 5-V or 3.3-V system supply rails. The TPS6206x operates at 3-MHz fixed frequency and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range. The power save mode is optimized for low output voltage ripple. For low noise applications, the device can be forced into fixed frequency PWM mode by pulling the MODE pin high.

In the shutdown mode, the current consumption is reduced to less than 1 µA and an internal circuit discharges the output capacitor.

TPS6206x family is optimized for operation with a tiny 1-µH inductor and a small 10-µF output capacitor to achieve smallest solution size and high regulation performance.

The TPS6206x operates over a free air temperature of –40°C to 85°C. The device is available in a small 2-mm × 2-mm × 0.75-mm 8-pin WSON PowerPAD integrated circuit package.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
12개 모두 보기
유형 직함 날짜
* Data sheet TPS6206x 3-MHz, 1.6-A, Step Down Converter in 2-mm × 2-mm WSON Package datasheet (Rev. B) PDF | HTML 2015/07/31
Application note QFN and SON PCB Attachment (Rev. C) PDF | HTML 2023/12/06
Application note Performing Accurate PFM Mode Efficiency Measurements (Rev. A) 2018/12/11
Analog Design Journal Understanding 100% mode in low-power DC/DC converters 2018/06/22
Analog Design Journal Achieving a clean startup by using a DC/DC converter with a precise enable-pin threshold 2017/10/24
Application note Extending the Soft Start Time Without a Soft Start Pin (Rev. B) 2017/06/15
Analog Design Journal Testing tips for applying external power to supply outputs without an input voltage 2016/10/24
Design guide Wi-Fi Enabled Level 1 Level 2 Electric Vehicle Service Equipment Design Guide 2016/08/16
Application note Basic Calculation of a Buck Converter's Power Stage (Rev. B) 2015/08/17
Analog Design Journal Five steps to a great PCB layout for a step-down converter 2015/01/29
Application note Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) 2012/01/13
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011/06/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62060EVM-663 — TPS62060EVM-663 평가 모듈

The TPS62060EVM-663 is a fully assembled and tested platform for evaluating the performance of the TPS62060 1.6-A step-down converter. This document includes schematic diagrams, printed-circuit board (PCB) layout, bill of materials, and test data. Throughout this document, the abbreviations EVM, (...)

사용 설명서: PDF
시뮬레이션 모델

TPS62063 TINA-TI Reference Design Start

SLVM397.TSC (849 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS62063 TINA-TI Reference Design Steady

SLVM395.TSC (290 KB) - TINA-TI Reference Design
시뮬레이션 모델

TPS62063 TINA-TI Transient Spice Model

SLVM396.ZIP (80 KB) - TINA-TI Spice Model
시뮬레이션 모델

TPS62063 Unencrypted PSpice Transient Model Package (Rev. B)

SLVM192B.ZIP (166 KB) - PSpice Model
레퍼런스 디자인

TIDM-DELFINO-ETHERCAT — 고성능 MCU 레퍼런스 디자인을 위한 EtherCAT 인터페이스

This reference design demonstrates how to connect a C2000 Delfino MCU to an EtherCAT™ ET1100 slave controller. The interface supports both demultiplexed address/data busses for maximum bandwidth and minimum latency and a SPI mode for low pin-count EtherCAT communication.  The slave (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDC-EVSE-NFC — EV 충전 스테이션(충전 파일)을 위한 NFC 인증 레퍼런스 디자인

TIDC-EVSE-NFC 레퍼런스 디자인은 TI의 NFC 기술을 기존 EVSE 플랫폼과 간단하게 통합하여 사용자 인증을 가능하게 하는 방법을 보여줍니다. NFC 표준은 여러 가지 하위 기술과 작업 그룹으로 구성되어 특정 시스템에 통합하기가 어렵습니다. 이 설계의 입증된 레퍼런스 디자인과 인증된 소프트웨어를 활용하면 표준 준수를 보장하고 개발 프로세스를 간소화할 수 있습니다. 이 설계는 운영 시스템에 기본 기능만 통합했지만, 포함된 예제 소프트웨어는 NFC를 EVSE 설계에 통합하는 것이 얼마나 간단한지 보여줍니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDC-EVSE-WIFI — Wi-Fi 지원 레벨 1 및 레벨 2 전기 자동차 서비스 장비 레퍼런스 디자인

TIDC-EVSE-Wi-Fi® 검증된 레퍼런스 디자인에는 Wi-Fi 기능이 추가된 J1772 호환 레벨 1 및 레벨 2 EVSE(전기 자동차 서비스 장비)를 구현하는 방법을 자세히 설명합니다. CC3100 네트워크 프로세서는 EVSE와 같은 고도의 임베디드 장치를 손쉽게 기존 무선 네트워크에 연결하거나 디바이스에 바로 연결할 수 있게 해줍니다. EVSE에 이 기능을 통합함으로써 이 설계는 연결된 전기 자동차의 충전 상태에 대한 원격 전원 모니터링 및 제어를 지원합니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-010011 — 보호 릴레이 프로세서 모듈을 위한 고효율 전원 공급 장치 아키텍처 레퍼런스 설계

이 레퍼런스 설계는 1A 이상의 부하 전류와 높은 효율이 필요한 애플리케이션 프로세서 모듈을 위한 여러 전압 레일을 생성하는 다양한 전력 아키텍처를 보여줍니다. 필요한 전원 공급은 백플레인에서 5V, 12V 또는 24V DC 입력을 사용하여 생성됩니다. 전원 공급은 통합 FET와 크기를 위해 인덕터가 통합된 전원 모듈을 사용하여 생성됩니다. 이 설계는 낮은 EMI가 필요한 애플리케이션을 위한 HotRod™ 패키지 유형을 갖추고 있습니다. 또한 설계 시간이 제한된 애플리케이션에 적합합니다. 추가 기능으로는 DDR 터미네이션 (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
WSON (DSG) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상