전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS62843

활성

1.8V~5.5V 입력, 600mA 초저 IQ 스텝다운 컨버터

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 0.6 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 1500 Switching frequency (max) (kHz) 1500 Features Enable, Light Load Efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 3.6 Iq (typ) (µA) 0.275 Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 125 Topology Buck Type Converter Iout (max) (A) 0.6 Vin (min) (V) 1.8 Vin (max) (V) 5.5 Switching frequency (min) (kHz) 1500 Switching frequency (max) (kHz) 1500 Features Enable, Light Load Efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 3.6 Iq (typ) (µA) 0.275 Duty cycle (max) (%) 100
DSBGA (YKA) 6 0.735 mm² 1.05 x 0.7 SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • 1.8V to 5.5V input voltage range
  • 0.4V to 3.6V output voltage range
  • 275nA typical quiescent current
  • 600mA output current
  • 1% output voltage accuracy
  • 4nA typical shutdown current
  • Output discharge
  • VSET pin-selectable output voltage through a single resistor
    • TPS628436: 0.4V to 0.8V
    • TPS628437: 0.8V to 1.8V
    • TPS628438: 1.8V to 3.6V
  • Designed for small passive components
    • 1µH inductor
    • Down to effective capacitance of 4µF COUT
  • High PSRR (up to 83dB)
  • Low output voltage ripple in power save mode
  • RF-friendly and fast transient DCS-Control
  • Automatic transition to no ripple 100% mode
  • 0603-inductor and 0402-capacitor size supported
  • Tiny 6-pin, 0.35mm pitch WCSP package with 0.84mm² size
  • Pin-to-pin compatible to the TPS6280x family (1A) in WCSP package
  • Available in a 1.60mm × 1.60mm SOT563 package
  • 1.8V to 5.5V input voltage range
  • 0.4V to 3.6V output voltage range
  • 275nA typical quiescent current
  • 600mA output current
  • 1% output voltage accuracy
  • 4nA typical shutdown current
  • Output discharge
  • VSET pin-selectable output voltage through a single resistor
    • TPS628436: 0.4V to 0.8V
    • TPS628437: 0.8V to 1.8V
    • TPS628438: 1.8V to 3.6V
  • Designed for small passive components
    • 1µH inductor
    • Down to effective capacitance of 4µF COUT
  • High PSRR (up to 83dB)
  • Low output voltage ripple in power save mode
  • RF-friendly and fast transient DCS-Control
  • Automatic transition to no ripple 100% mode
  • 0603-inductor and 0402-capacitor size supported
  • Tiny 6-pin, 0.35mm pitch WCSP package with 0.84mm² size
  • Pin-to-pin compatible to the TPS6280x family (1A) in WCSP package
  • Available in a 1.60mm × 1.60mm SOT563 package

The TPS62843 is a high-efficiency, step-down converter family with ultra-low operating quiescent current of typically 275nA. The device features a 4nA shutdown (typical) current when disabled.

The device uses DCS-Control with a low and RF-friendly output voltage ripple to power radios.

The device operates with a typical switching frequency of 1.5MHz and extends a high efficiency at light-load down to 100µA load current and below.

3 × 18 pre-defined output voltages can be selected by connecting a resistor to the VSET pin, making the family usable across various applications with a minimum set of passive components.

The TPS62843 is a high-efficiency, step-down converter family with ultra-low operating quiescent current of typically 275nA. The device features a 4nA shutdown (typical) current when disabled.

The device uses DCS-Control with a low and RF-friendly output voltage ripple to power radios.

The device operates with a typical switching frequency of 1.5MHz and extends a high efficiency at light-load down to 100µA load current and below.

3 × 18 pre-defined output voltages can be selected by connecting a resistor to the VSET pin, making the family usable across various applications with a minimum set of passive components.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치와 동일한 기능을 지원하는 핀 대 핀
TPS62800 활성 1.75V~5.5V 입력, 1A 초저 IQ 강압 컨버터(0.7mm x 1.05mm 칩 스케일 패키지) Drop-in alternative with selectable power save and Forced-PWM mode and higher switching frequency
TPS62806 활성 1.75V~5.5V 입력, 600mA 초저 IQ 강압 컨버터(0.7mm x 1.05mm WCSP 패키지) Drop-in alternative with selectable power save and forced-PWM mode

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
9개 모두 보기
유형 직함 날짜
* Data sheet TPS62843 1.8V to 5.5V, 600mA, 275nA IQ , Small-Size Step-Down Converters datasheet (Rev. C) PDF | HTML 2024/06/03
Technical article 3 ways low-Iq technologies extend battery life without compromising system performance PDF | HTML 2024/01/05
Technical article How to design wearables that are smaller and go longer between charges PDF | HTML 2024/01/05
EVM User's guide TPS62843xEVM-030 Evaluation Module User's Guide PDF | HTML 2023/10/02
Certificate TPS62843678EVM-167 EU RoHS Declaration of Conformity (DoC) 2021/12/21
User guide TPS628436-7-8EVM-167 Evaluation Module PDF | HTML 2021/11/22
White paper Benefits of a Resistor-to-Digital Converter in Ultra-Low Power Supplies 2019/10/14
Analog Design Journal Understanding frequency variation in the DCS-Control(TM) topology 2015/10/30
Analog Design Journal IQ: What it is, what it isn’t, and how to use it 2011/06/17

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS628436-7-8EVM-167 — DSBGA 패키지용 TPS62843 평가 모듈

TPS628436-7-8EVM-167 평가 모듈(EVM)은 0.35mm 피치의 소형 1.05mm x 0.8mm WCSP 패키지에 300nA IQ를 지원하는 600mA 스텝다운 컨버터의 TPS62843 제품군을 평가할 수 있습니다. EVM에는 1.8V와 5.5V 사이의 입력 전압에서 0.4V와 3.6V 사이에서 출력 전압을 생성하는 세 개의 개별 회로가 있습니다. 회로는 최대 높이가 1.0mm인 12.4mm²를 차지합니다. TPS628436-7-8 은 웨어러블 및 스마트폰과 같은 공간이 제약된 애플리케이션을 위한 작고 (...)

사용 설명서: PDF | HTML
TI.com에서 구매 불가
평가 보드

TPS62843678EVM-030 — SOT-563 패키지용 TPS62843 평가 모듈

TPS62843678EVM-030은 0.6mm 피치의 1.6mm × 1.6mm SOT-563 패키지에서 275nA IQ를 갖춘 600mA 스텝다운 컨버터의 TPS62843 제품군 평가를 용이하게 합니다. 평가 모듈에는 1.8V~5.5V 사이의 높은 입력 전압에서 0.4V~3.6V 범위의 출력 전압을 생성하는 3개의 별도 회로가 포함되어 있습니다. TPS62843x는 웨어러블, 스마트폰, 산업 장비와 같이 공간이 제약된 애플리케이션을 위한 POL(Point-of-Load) 컨버터용 고효율, 초소형 솔루션입니다.
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS628436 PSpice Unencrypted Transient Model

SLVMDZ6.ZIP (271 KB) - PSpice Model
시뮬레이션 모델

TPS628437 PSpice Unencrypted Transient Model

SLVMDZ5.ZIP (274 KB) - PSpice Model
시뮬레이션 모델

TPS628438 PSpice Unencrypted Transient Model

SLVMDZ7.ZIP (276 KB) - PSpice Model
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YKA) 6 Ultra Librarian
SOT-5X3 (DRL) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상