전원 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

TPS62901

활성

1.5mm × 2mm QFN 패키지의 3V~17V, 1A 고효율 및 저 IQ 벅 컨버터

제품 상세 정보

Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 1 Vin (min) (V) 3 Vin (max) (V) 17 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, Tracking, UVLO adjustable Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 5.5 Iq (typ) (µA) 4 Duty cycle (max) (%) 100
Rating Catalog Operating temperature range (°C) -40 to 150 Topology Buck Type Converter Iout (max) (A) 1 Vin (min) (V) 3 Vin (max) (V) 17 Switching frequency (min) (kHz) 1000 Switching frequency (max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, Tracking, UVLO adjustable Control mode DCS-Control Vout (min) (V) 0.4 Vout (max) (V) 5.5 Iq (typ) (µA) 4 Duty cycle (max) (%) 100
VQFN-HR (RPJ) 9 3 mm² 2 x 1.5
  • High efficiency for wide duty cycle and load range
    • IQ: 4µA typical
    • Selectable switching frequency of 2.5MHz and 1.0MHz
    • RDS(ON): 62mΩ high side, 22mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5mm × 2.0mm VQFN package with 0.5mm pitch
  • Up to 1A continuous output current
  • ±0.9% feedback voltage accuracy across temp (–40°C to 150°C)
  • Configurable output voltage options:
    • VFB external divider: 0.6V to 5.5V
    • VSET internal divider: 16 options between 0.4V and 5.5V
  • DCS-Contro topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power-good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62901 using the WEBENCH Power Designer
  • High efficiency for wide duty cycle and load range
    • IQ: 4µA typical
    • Selectable switching frequency of 2.5MHz and 1.0MHz
    • RDS(ON): 62mΩ high side, 22mΩ low side
    • Automatic efficiency enhancement (AEE)
  • Small 1.5mm × 2.0mm VQFN package with 0.5mm pitch
  • Up to 1A continuous output current
  • ±0.9% feedback voltage accuracy across temp (–40°C to 150°C)
  • Configurable output voltage options:
    • VFB external divider: 0.6V to 5.5V
    • VSET internal divider: 16 options between 0.4V and 5.5V
  • DCS-Contro topology with 100% mode
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Forced PWM or auto power save mode
    • Power-good output
    • Selectable active output discharge
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPS62901 using the WEBENCH Power Designer

The TPS62901 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5MHz or 1.0MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ±1% with the DCS-Control topology. The wide input voltage range of 3V to 17V supports a variety of nominal inputs like 12V supply rails, single-cell or multi-cell Li-Ion, and 5V or 3.3V rails.

The TPS62901 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/S-CONF input to set the internal and external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50mm × 2.00mm with 0.5mm pitch.

The TPS62901 is a highly-efficient, small, and flexible synchronous step-down DC-DC converter that is easy to use. A selectable switching frequency of 2.5MHz or 1.0MHz allows the use of small inductors and provides fast transient response. The device supports high VOUT accuracy of ±1% with the DCS-Control topology. The wide input voltage range of 3V to 17V supports a variety of nominal inputs like 12V supply rails, single-cell or multi-cell Li-Ion, and 5V or 3.3V rails.

The TPS62901 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/S-CONF input to set the internal and external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 9-pin VQFN package measuring 1.50mm × 2.00mm with 0.5mm pitch.

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
비교 대상 장치보다 업그레이드된 기능을 지원하는 드롭인 대체품
TPS62902 활성 1.5mm × 2mm QFN 패키지의 3V~17V, 2A 고효율 및 저 IQ 벅 컨버터 Pin-to-pin 2-A output current
TPS62903 활성 1.5mm × 2mm QFN 패키지의 3V~17V, 3A 고효율 저 IQ 벅 컨버터 Pin-to-pin 3-A output current

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
6개 모두 보기
유형 직함 날짜
* Data sheet TPS62901 , 3V to 17V, High Efficiency and Low IQ Buck Converter in 1.5mm × 2mm QFN Package datasheet (Rev. A) PDF | HTML 2024/01/23
Application note How to Best Use TPS62903 for a Given Application Requirement PDF | HTML 2021/08/13
Application note Comparison of TPS6290x vs. TPS621x0 PDF | HTML 2021/07/23
Application brief Multi-Function Pins for Easy Designing PDF | HTML 2021/07/07
EVM User's guide TPS6290x Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 2021/05/07
Certificate TPS62901EVM-069 EU RoHS Declaration of Conformity (DoC) 2020/12/15

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS62901EVM-069 — 1.5mm x 2mm QFN 패키지의 17VIN, 1A, 저 IQ 벅 컨버터 평가 모듈

TPS62901EVM-069(BSR069-001) 평가 모듈(EVM)은 소형 1.5mm x 2mm QFN 패키지에서 TPS62901 1A 벅 컨버터의 평가를 용이하게 합니다. EVM은 최대 17V의 입력 전압에서 3.3V 출력 전압을 출력합니다. TPS62901은 공장 및 건물 자동화, IP 네트워크 카메라, 산업용 PC, 데이터 센터 스위치, 서보 드라이브, 모바일 및 임베디드 컴퓨팅 및 12V의 입력 전압을 지원하는 모든 애플리케이션 또는 1~4셀 리튬 배터리 팩 등 다양한 산업용, 엔터프라이즈 및 개인용 전자 제품에 사용되는 (...)
사용 설명서: PDF | HTML
TI.com에서 구매 불가
시뮬레이션 모델

TPS62901 PSpice Transient Model

SLVMDO8.ZIP (243 KB) - PSpice Model
거버(Gerber) 파일

BSR069A Gerbers

SNVC242.ZIP (394 KB)
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN-HR (RPJ) 9 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상