전원 관리 선형 및 저손실(LDO) 레귤레이터

TPS7A10

활성

300mA, 낮은 VIN(0.75), 초저 IQ, 저손실 전압 레귤레이터(활성화 지원)

제품 상세 정보

Output options Fixed Output Iout (max) (A) 0.3 Vin (max) (V) 3.3 Vin (min) (V) 0.75 Vout (max) (V) 3 Vout (min) (V) 0.5 Fixed output options (V) 0.6, 0.8, 1, 1.05, 1.1, 1.2, 1.5, 1.8, 2.5, 2.8, 3 Rating Catalog Noise (µVrms) 110 PSRR at 100 KHz (dB) 36 Iq (typ) (mA) 0.0016 Thermal resistance θJA (°C/W) 169.4, 188.8 Load capacitance (min) (µF) 2.2 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 70 Operating temperature range (°C) -40 to 125
Output options Fixed Output Iout (max) (A) 0.3 Vin (max) (V) 3.3 Vin (min) (V) 0.75 Vout (max) (V) 3 Vout (min) (V) 0.5 Fixed output options (V) 0.6, 0.8, 1, 1.05, 1.1, 1.2, 1.5, 1.8, 2.5, 2.8, 3 Rating Catalog Noise (µVrms) 110 PSRR at 100 KHz (dB) 36 Iq (typ) (mA) 0.0016 Thermal resistance θJA (°C/W) 169.4, 188.8 Load capacitance (min) (µF) 2.2 Regulated outputs (#) 1 Features Enable, Output discharge Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 70 Operating temperature range (°C) -40 to 125
DSBGA (YKA) 5 0.8814 mm² 1.13 x 0.78 WSON (DSE) 6 2.25 mm² 1.5 x 1.5
  • Ultra-Low Input Voltage Range: 0.75 V to 3.3 V
  • Ultra-Low Dropout for Minimum Power Loss:
    • 70 mV (Maximum) at 300 mA (VOUT > 1.0 V), YKA Package
  • Low Quiescent Current:
    • VIN IQ = 1.6 µA (Typical)
    • VBIAS IQ = 6 µA (Typical)
  • 1.5% Accuracy over Load, Line, and Temperature
  • High PSRR: 60 dB at 1 kHz
  • Available in Fixed-Output Voltages:
    • 0.5 V to 3.0 V (in 50-mV Steps)
  • VBIAS Range: 1.7 V to 5.5 V
  • Packages:
    • 0.74-mm × 1.09-mm WCSP-5
    • 1.50-mm × 1.50-mm WSON-6
  • Built-In Soft Start With Monotonic VOUT Rise
  • Active Output Discharge
  • Ultra-Low Input Voltage Range: 0.75 V to 3.3 V
  • Ultra-Low Dropout for Minimum Power Loss:
    • 70 mV (Maximum) at 300 mA (VOUT > 1.0 V), YKA Package
  • Low Quiescent Current:
    • VIN IQ = 1.6 µA (Typical)
    • VBIAS IQ = 6 µA (Typical)
  • 1.5% Accuracy over Load, Line, and Temperature
  • High PSRR: 60 dB at 1 kHz
  • Available in Fixed-Output Voltages:
    • 0.5 V to 3.0 V (in 50-mV Steps)
  • VBIAS Range: 1.7 V to 5.5 V
  • Packages:
    • 0.74-mm × 1.09-mm WCSP-5
    • 1.50-mm × 1.50-mm WSON-6
  • Built-In Soft Start With Monotonic VOUT Rise
  • Active Output Discharge

The TPS7A10 is an ultra-small, low quiescent current, low-dropout regulator (LDO) that can source 300 mA with an outstanding ac performance (load and line transient responses). This device has an input range of 0.75 V to 3.3 V, and output range of 0.5 V to 3.0 V with a very high accuracy of 1.5% over load, line and temperature. This performance is ideal for powering the lower core voltages of the modern MCUs and analog sensors.

The main power path is through VIN and can be connected to a power supply as low as 70 mV above the output voltage. This device supports very low input voltages with the use of an additional VBIAS rail that is used to power the internal circuitry of the LDO. Both VIN and VBIAS consume very low quiescent current of 1.6 µA and 6 µA, respectively. The low IQ and ultra-low dropout features helps in increasing the efficiency of the solution in the power-sensitive applications. For example, VIN can be an output of a high-efficiency, DC/DC step-down regulator, and the VBIAS pin can be connected to a rechargeable battery.

The TPS7A10 is equipped with an active pull-down circuit to quickly discharge the output when disabled, and provides a known start-up state.

The TPS7A10 is available in an ultra-small, 5-pin DSBGA (YKA) package that makes the device suitable for space-constrained applications. The device is also available in a 6-pin WSON (DSE) package.


The TPS7A10 is an ultra-small, low quiescent current, low-dropout regulator (LDO) that can source 300 mA with an outstanding ac performance (load and line transient responses). This device has an input range of 0.75 V to 3.3 V, and output range of 0.5 V to 3.0 V with a very high accuracy of 1.5% over load, line and temperature. This performance is ideal for powering the lower core voltages of the modern MCUs and analog sensors.

The main power path is through VIN and can be connected to a power supply as low as 70 mV above the output voltage. This device supports very low input voltages with the use of an additional VBIAS rail that is used to power the internal circuitry of the LDO. Both VIN and VBIAS consume very low quiescent current of 1.6 µA and 6 µA, respectively. The low IQ and ultra-low dropout features helps in increasing the efficiency of the solution in the power-sensitive applications. For example, VIN can be an output of a high-efficiency, DC/DC step-down regulator, and the VBIAS pin can be connected to a rechargeable battery.

The TPS7A10 is equipped with an active pull-down circuit to quickly discharge the output when disabled, and provides a known start-up state.

The TPS7A10 is available in an ultra-small, 5-pin DSBGA (YKA) package that makes the device suitable for space-constrained applications. The device is also available in a 6-pin WSON (DSE) package.


다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS7A02 활성 200mA, nanopower-IQ (25 nA), low-dropout (LDO) voltage regulator with enable Much lower IQ but dropout voltage is higher.
TPS7A03 활성 빠른 과도 응답을 지원하는 나노전력 IQ 200nA 200mA 저손실(LDO) 전압 레귤레이터 Much lower IQ but dropout voltage is higher.
TPS7A05 활성 200mA, ultra-low-IQ, high-accuracy, low-dropout voltage regulator with enable 35% lower IQ but dropout voltage is higher.
TPS7A25 활성 전원 양호 기능을 지원하는 300mA, 18V, 초저 IQ, 고정밀, 조정 가능한 저손실 전압 레귤레이터 Higher max VIN with similar IQ.

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
4개 모두 보기
유형 직함 날짜
* Data sheet TPS7A10 300-mA, Low VIN, Low VOUT, Ultra-Low Dropout Regulator datasheet (Rev. B) PDF | HTML 2018/10/11
White paper Understanding the Foundations of Quiescent Current in Linear Power Systems 2021/02/18
Technical article How LILO LDOs increase system efficiency PDF | HTML 2018/08/21
EVM User's guide TPS7A10 Evaluation Module User's Guide 2018/02/23

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS7A10EVM-004 — TPS7A10 300mA 저 IQ 초저손실(LDO) 선형 레귤레이터 평가 모듈

The TPS7A10EVM-004 evaluation module (EVM) is designed for a typical configuration to evaluate the operation and performance of the TPS7A10, which is a 300-mA low-Vin, low-Vout, low-dropout (LDO) voltage regulator.

The EVM circuit board is configured to be a reference design for engineering (...)

사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

TPS7A1006P PSpice Transient Model

SBVM874.ZIP (53 KB) - PSpice Model
시뮬레이션 모델

TPS7A1006P Unencrypted PSpice Transient Model

SBVM861.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1008P PSpice Transient Model

SBVM858.ZIP (54 KB) - PSpice Model
시뮬레이션 모델

TPS7A1008P Unencrypted PSpice Transient Model

SBVM870.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A10105P PSpice Transient Model

SBVM873.ZIP (49 KB) - PSpice Model
시뮬레이션 모델

TPS7A10105P Unencrypted PSpice Transient Model

SBVM877.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1010P PSpice Transient Model

SBVM860.ZIP (57 KB) - PSpice Model
시뮬레이션 모델

TPS7A1010P Unencrypted PSpice Transient Model

SBVM859.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1011P PSpice Transient Model

SBVM871.ZIP (86 KB) - PSpice Model
시뮬레이션 모델

TPS7A1011P Unencrypted PSpice Transient Model

SBVM876.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1012P PSpice Transient Model

SBVM879.ZIP (48 KB) - PSpice Model
시뮬레이션 모델

TPS7A1012P Unencrypted PSpice Transient Model

SBVM866.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1015P PSpice Transient Model

SBVM875.ZIP (49 KB) - PSpice Model
시뮬레이션 모델

TPS7A1015P Unencrypted PSpice Transient Model

SBVM865.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1018P PSpice Transient Model

SBVM868.ZIP (56 KB) - PSpice Model
시뮬레이션 모델

TPS7A1018P Unencrypted PSpice Transient Model

SBVM878.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1025P PSpice Transient Model

SBVM867.ZIP (51 KB) - PSpice Model
시뮬레이션 모델

TPS7A1025P Unencrypted PSpice Transient Model

SBVM869.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1028P PSpice Transient Model

SBVM864.ZIP (61 KB) - PSpice Model
시뮬레이션 모델

TPS7A1028P Unencrypted PSpice Transient Model

SBVM862.ZIP (3 KB) - PSpice Model
시뮬레이션 모델

TPS7A1030P PSpice Transient Model

SBVM872.ZIP (70 KB) - PSpice Model
시뮬레이션 모델

TPS7A1030P Unencrypted PSpice Transient Model

SBVM863.ZIP (3 KB) - PSpice Model
레퍼런스 디자인

TIDA-01566 — 웨어러블 및 IoT를 위한 조명 부하 효율성, 저잡음 전원 공급 장치 레퍼런스 설계

This reference design demonstrates an ultra-small power supply solution (8.5 mm2 total) for an efficient and low-noise rail in portable personal electronic devices, such as wearables, smart watches, smartphones, headsets, headphones, earbuds, and camera modules. A low dropout (LDO) linear (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
DSBGA (YKA) 5 Ultra Librarian
WSON (DSE) 6 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상