전원 관리 선형 및 저손실(LDO) 레귤레이터

TPS7A7200

활성

2A, 낮은 VIN(1.43V), 초저손실 전압 레귤레이터(전원 양호 및 활성화 지원)

이 제품의 최신 버전이 있습니다

open-in-new 대안 비교
다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능
TPS7A92 활성 높은 정확도를 갖춘 2A, 저잡음, 높은 PSRR, 조정 가능한 초저손실 전압 레귤레이터 2-A, low noise (4.7-µVrms) LDO in a small package (2.5 mm x 2.5 mm).
비교 대상 장치와 유사한 기능
TPS7A83A 활성 전원 코드가 포함된 2A, 낮은 VIN(1.1V), 저잡음, 고정밀, 초저손실 전압 레귤레이터 2-A LDO with low-noise (4.4 µVrms) and low-dropout (200 mV) and improved accuracy (0.75%).

제품 상세 정보

Output options Adjustable Output, Fixed Output Iout (max) (A) 2 Vin (max) (V) 6.5 Vin (min) (V) 1.43 Vout (max) (V) 5 Vout (min) (V) 0.9 Noise (µVrms) 40 Iq (typ) (mA) 4 Thermal resistance θJA (°C/W) 36 Rating Catalog Load capacitance (min) (µF) 4.7 Regulated outputs (#) 1 Features Enable, Power good, Soft start Accuracy (%) 1.5 PSRR at 100 KHz (dB) 25 Dropout voltage (Vdo) (typ) (mV) 180 Operating temperature range (°C) -40 to 125
Output options Adjustable Output, Fixed Output Iout (max) (A) 2 Vin (max) (V) 6.5 Vin (min) (V) 1.43 Vout (max) (V) 5 Vout (min) (V) 0.9 Noise (µVrms) 40 Iq (typ) (mA) 4 Thermal resistance θJA (°C/W) 36 Rating Catalog Load capacitance (min) (µF) 4.7 Regulated outputs (#) 1 Features Enable, Power good, Soft start Accuracy (%) 1.5 PSRR at 100 KHz (dB) 25 Dropout voltage (Vdo) (typ) (mV) 180 Operating temperature range (°C) -40 to 125
VQFN (RGT) 16 9 mm² 3 x 3 VQFN (RGW) 20 25 mm² 5 x 5
  • Low-dropout voltage: 180 mV at 2 A
  • V IN range: 1.5 V to 6.5 V
  • Configurable fixed V OUT range: 0.9 V to 3.5 V
  • Adjustable V OUT range: 0.9 V to 5 V
  • Very good load- and line-transient response
  • Stable with ceramic output capacitor
  • 1.5% accuracy overline, overload, and overtemperature
  • Programmable soft-start
  • Power-good (PG) output
  • Package s:
    • 3-mm × 3-mm, 16-pin VQFN
    • 5-mm × 5-mm, 20-pin VQFN
  • Low-dropout voltage: 180 mV at 2 A
  • V IN range: 1.5 V to 6.5 V
  • Configurable fixed V OUT range: 0.9 V to 3.5 V
  • Adjustable V OUT range: 0.9 V to 5 V
  • Very good load- and line-transient response
  • Stable with ceramic output capacitor
  • 1.5% accuracy overline, overload, and overtemperature
  • Programmable soft-start
  • Power-good (PG) output
  • Package s:
    • 3-mm × 3-mm, 16-pin VQFN
    • 5-mm × 5-mm, 20-pin VQFN

The TPS7A7200 low-dropout (LDO) voltage regulator is designed for applications requiring very-low dropout capability ( 180 mV at 2 A) with an input voltage from 1.5 V to 6.5 V. The TPS7A7200 offers an innovative, user-configurable, output-voltage setting from 0.9 V to 3.5 V, thus eliminating external resistors and any associated errors.

The TPS7A7200 has very fast load-transient response, is stable with ceramic output capacitors, and supports a better than 2% accuracy over line, load, and temperature. A soft-start pin allows for an application to reduce inrush into the load. Additionally, an open-drain, power-good signal allows for sequencing power rails.

The TPS7A7200 is available in 3-mm × 3-mm, 16-pin VQFN and 5-mm × 5-mm, 20-pin VQFN packages.

The TPS7A7200 low-dropout (LDO) voltage regulator is designed for applications requiring very-low dropout capability ( 180 mV at 2 A) with an input voltage from 1.5 V to 6.5 V. The TPS7A7200 offers an innovative, user-configurable, output-voltage setting from 0.9 V to 3.5 V, thus eliminating external resistors and any associated errors.

The TPS7A7200 has very fast load-transient response, is stable with ceramic output capacitors, and supports a better than 2% accuracy over line, load, and temperature. A soft-start pin allows for an application to reduce inrush into the load. Additionally, an open-drain, power-good signal allows for sequencing power rails.

The TPS7A7200 is available in 3-mm × 3-mm, 16-pin VQFN and 5-mm × 5-mm, 20-pin VQFN packages.

다운로드 스크립트와 함께 비디오 보기 동영상

Check TI.com inventory for similar products

Products with similar specifications, sorted by available TI.com inventory.

View now

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
7개 모두 보기
유형 직함 날짜
* Data sheet TPS7A7200 2-A,Fast-Transient, Low-Dropout Voltage Regulator datasheet (Rev. G) PDF | HTML 2023/10/30
White paper Parallel LDO Architecture Design Using Ballast Resistors PDF | HTML 2022/12/14
White paper Comprehensive Analysis and Universal Equations for Parallel LDO's Using Ballast PDF | HTML 2022/12/13
Selection guide Low Dropout Regulators Quick Reference Guide (Rev. P) 2018/03/21
Application note ANY-OUT™ LDO Controlled by I2C™ IO Expander Device (Rev. A) 2012/09/20
Application note ANY-OUT™ LDO Controlled by I2C™ IO Expander Device 2012/05/29
User guide TPS7A7x00EVM-718 Evaluation Module 2012/02/28

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

ADC32RF42EVM — ADC32RF42 듀얼 채널, 14비트, 1.5GSPS, RF 샘플링 ADC 평가 모듈

ADC32RF42 평가 모듈(EVM)은 JESD204B 인터페이스를 사용하는 듀얼 1.5 GSPS 14비트 ADC(아날로그-디지털 컨버터)의 성능을 입증합니다. 이 EVM에는 ADC32RF42 장치가 포함되어 있으며, 필요한 전압을 공급하기 위해 LMK04828과 TI 전압 레귤레이터가 JESD204B 클로킹을 제공합니다.

ADC의 각 채널에 대한 입력은 기본 설정상 변압기 입력 회로에 연결되어 있으며, 이는 50Ω 단일 종단 신호 소스에 연결할 수 있습니다. 클록 레퍼런스 입력은 변압기 입력을 통해 제공되며, (...)

사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

TPS7A7200EVM-718 — TPS7A7200 저손실(LDO) 선형 레귤레이터 평가 모듈

The Texas Instruments TPS7A7200EVM-718 is a fully assembled and tested Evaluation Module (EVM) for evaluating the TPS7A7200 Low-Dropout Regulator at any of its pin-selectable output voltages (1V to 3.5V in 50mV increments). The EVM circuit is configured to be a reference design for engineering (...)
사용 설명서: PDF
TI.com에서 구매 불가
시뮬레이션 모델

TPS7A7200 PSpice Transient Model

SBVM149.ZIP (1050 KB) - PSpice Model
시뮬레이션 모델

TPS7A7200 Unencrypted PSpice Model

SBVM636.ZIP (1 KB) - PSpice Model
레퍼런스 디자인

TIDA-01161 — 1GHz 신호 대역폭 RF 샘플링 리시버 레퍼런스 설계

RF 샘플링 아키텍처는 기존의 수퍼헤테로다인 아키텍처를 대체할 수 있습니다. RF 샘플링 아날로그-디지털 컨버터(ADC)는 높은 샘플링 속도에서 작동하며 신호를 무선 주파수(RF)에서 디지털로 직접 변환합니다. 높은 샘플링 속도 때문에 RF 샘플링 아키텍처는 매우 넓은 신호 대역폭을 지원합니다. 더 높은 신호 대역폭에서는 시스템 용량이 늘어나게 되므로 데이터 전송이 더 빨라지고 사용자 액세스가 가능해집니다.

이 레퍼런스 디자인은 최대 3GSPS의 듀얼 채널, 14비트 분해능 ADC 샘플링인 ADC32RF45를 특징으로 합니다. 최대 (...)

Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01442 — ADC12DJ3200을 사용하는 L, S, C 및 X 대역을 위한 직접 RF 샘플링 레이더 수신기 레퍼런스 디자인

이 레퍼런스 디자인은 ADC12DJ3200 평가 모듈(EVM)을 사용하여 HF, VHF, UHF, L-, S- 및 C- 및 X-밴드의 일부에서 레이더 작동에 사용되는 직접 RF 샘플링 리시버를 시연합니다. 아날로그-디지털 컨버터(ADC)의 넓은 아날로그 입력 대역폭 및 높은 샘플링 속도(6.4GSPS)는 단일 또는 듀얼 ADC로 다중 대역 범위를 제공합니다. ADC의 직접 RF 샘플링 기능은 여러 다운 변환 단계를 제거하여 구성 요소 수를 줄이고 전반적인 시스템 복잡성을 줄입니다.
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01163 — 다중 대역 RF 샘플링 리시버 레퍼런스 디자인

The RF sampling receiver captures signals directly in the radio frequency (RF) band. In a multi-band application the desired signals are not very wide band but they are spaced far apart within the spectrum. The reference design captures signals in different RF bands and digitally down-converts them (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-01016 — 신호 분석기 및 무선 테스터의 RF 샘플링 ADC를 위한 클로킹 레퍼런스 디자인

TIDA-01016 is a clocking solution for high dynamic range high speed ADC. RF input signals are directly captured using the RF sampling approach by high speed ADC. The ADC32RF45 is a dual- channel, 14-bit, 3-GSPS RF sampling ADC. The 3-dB input bandwidth is 3.2 GHz, and it captures signals up to 4 (...)
Design guide: PDF
회로도: PDF
레퍼런스 디자인

TIDA-00814 — RF 샘플링 S 대역 레이더 리시버 레퍼런스 디자인

A direct RF sampling receiver approach to a radar system operating in S-band is demonstrated using the ADC32RF45, 3-Gsps, 14-bit analog to digital converter (ADC). RF sampling reduces the complexity of a system by removing down conversion and using a high sampling rate enables wider signal (...)
Design guide: PDF
회로도: PDF
패키지 CAD 기호, 풋프린트 및 3D 모델
VQFN (RGT) 16 Ultra Librarian
VQFN (RGW) 20 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상