전원 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)

TPS92210

활성

LED 조명용 Cascode MOSFET을 지원하는 COT(Constant-On-Time) 드라이버 컨트롤러

제품 상세 정보

Vin (max) (V) 20 Operating temperature range (°C) -40 to 125 Control mode Current Topology Buck, Flyback Rating Catalog Features Overcurrent protection, Overtemperature protection, Overvoltage protection, Peak current mode, Transition Control Mode Duty cycle (max) (%) 2
Vin (max) (V) 20 Operating temperature range (°C) -40 to 125 Control mode Current Topology Buck, Flyback Rating Catalog Features Overcurrent protection, Overtemperature protection, Overvoltage protection, Peak current mode, Transition Control Mode Duty cycle (max) (%) 2
SOIC (D) 8 29.4 mm² 4.9 x 6
  • Flexible Operation Modes
    • Constant On-Time Enables Single Stage PFC Implementation
    • Peak Primary Current
  • Cascoded MOSFET Configuration
    • Fully Integrated Current Control Without Sense Resistor
    • Fast and Easy Startup
  • Discontinuous Conduction Mode or Transition Mode Operation
  • Transformer Zero Energy Detection
    • Enables Valley Switching Operation
    • Helps to Achieve High Efficiency and Low EMI
  • Open LED Detection
  • Advanced Overcurrent Protection
  • Output Overvoltage Protection
  • Line Surge Ruggedness
  • Internal Over-Temperature Protection
  • 8-Pin SOIC (D) Package
  • Flexible Operation Modes
    • Constant On-Time Enables Single Stage PFC Implementation
    • Peak Primary Current
  • Cascoded MOSFET Configuration
    • Fully Integrated Current Control Without Sense Resistor
    • Fast and Easy Startup
  • Discontinuous Conduction Mode or Transition Mode Operation
  • Transformer Zero Energy Detection
    • Enables Valley Switching Operation
    • Helps to Achieve High Efficiency and Low EMI
  • Open LED Detection
  • Advanced Overcurrent Protection
  • Output Overvoltage Protection
  • Line Surge Ruggedness
  • Internal Over-Temperature Protection
  • 8-Pin SOIC (D) Package

The TPS92210 is a natural power factor correction (PFC) light emmitting diode (LED) lighting driver controller with advanced energy features to provide high efficiency control for LED lighting applications.

A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation in all regions of operation. The TPS92210 cascode architecture enables low switching loss in the primary side and when combined with the discontinuous conduction mode (DCM) operation ensures that there is no reverse recovery loss in the output rectifier. These innovations result in efficiency, reliability or system cost improvements over a conventional flyback architecture.

The TPS92210 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. The overload fault response is user-programmed for retry or latch mode. Additional protection features include open-LED detection by output overvoltage protection and thermal shutdown.

The TPS92210 is offered in the 8-pin SOIC (D) package. Operating junction temperature range is –40°C to 125°C

The TPS92210 is a natural power factor correction (PFC) light emmitting diode (LED) lighting driver controller with advanced energy features to provide high efficiency control for LED lighting applications.

A PWM modulation algorithm varies both the switching frequency and primary current while maintaining discontinuous or transition mode operation in all regions of operation. The TPS92210 cascode architecture enables low switching loss in the primary side and when combined with the discontinuous conduction mode (DCM) operation ensures that there is no reverse recovery loss in the output rectifier. These innovations result in efficiency, reliability or system cost improvements over a conventional flyback architecture.

The TPS92210 offers a predictable maximum power threshold and a timed response to an overload, allowing safe handling of surge power requirements. The overload fault response is user-programmed for retry or latch mode. Additional protection features include open-LED detection by output overvoltage protection and thermal shutdown.

The TPS92210 is offered in the 8-pin SOIC (D) package. Operating junction temperature range is –40°C to 125°C

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
9개 모두 보기
유형 직함 날짜
* Data sheet Single-Stage PFC Driver Controller for LED Lighting datasheet (Rev. B) 2012/08/10
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
Application note Line Undervoltage and Overvoltage Protection for TPS92210-Based LED Drivers 2015/08/14
Application note Extending Dimming Range of TPS92210 Over Universal AC Range by Applying Frequenc 2013/06/16
Test report Using the TPS92210-PMP6001, A Universal Input 38V 350mA Non Dimmable LED Driver1 2010/12/10
Test report Using the TPS92210-PMP6002 (Rev. A) 2010/12/10
Test report Using the TPS92210-PMP6003 (Rev. A) 2010/12/10
EVM User's guide Using the TPS92210EVM-647 Natural PFC LED Lighting Driver Controller (Rev. B) 2010/12/09
EVM User's guide Using the TPS92210EVM-613 Natural PFC LED Lighting Driver Controller (Rev. A) 2010/11/02

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPS92210EVM-613 — TPS92210 Natural PFC를 지원하는 230VAC TRIAC 조도 제어 전구 대체용 평가 모듈

The TPS92210EVM-613 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the TPS92210 in a single stage PFC 230VAC light bulb replacement design that is TRIAC dimmable.
사용 설명서: PDF
TI.com에서 구매 불가
평가 보드

TPS92210EVM-647 — TPS92210 Natural PFC를 지원하는 120VAC TRIAC 조도 제어 전구 대체용 평가 모듈

The TPS92210EVM-647 evaluation module is a fully assembled and tested circuit for evaluating the TPS92210 Natural PFC LED Lighting Driver Controller. The evaluation module demonstrates the TPS92210 in a single stage PFC 120VAC light bulb replacement design that is TRIAC dimmable.
사용 설명서: PDF
TI.com에서 구매 불가
계산 툴

TPS92210_DESIGN_CALC TPS92210 Design Calculator

The TPS92210 Design Calculator is a design tool for an AC/DC single LED string driver with a PFC and TRIAC dimming option. When using this tool the minimum output voltage should be greater than 5.2V and maximum output power should be less than 30W.
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨트롤러(외장 FET)
TPS92210 LED 조명용 Cascode MOSFET을 지원하는 COT(Constant-On-Time) 드라이버 컨트롤러
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상