신규

TPSM82843

Name: TPSM82843
Brand: TI
SKU: TPSM82843
Price: 0.9 USD

활성

통합 인덕터를 지원하는 275nA IQ, 0.4V~3.6V 선택 가능한 VOUT, 600mA 스텝다운 컨버터 모듈

지금 주문

데이터 시트

document-pdfAcrobat TPSM82843x 1.8V to 5.5V, 600mA, Ultra-Low 275nA IQ , High Efficiency, Step-Down Converter With Integrated Inductor in a QFN Package datasheet (Rev. A) (영어) PDF | HTML

TPSM82843

활성

데이터 시트

지금 주문

제품 상세 정보

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Type

Module

Iout (max) (A)

0.6

Vin (min) (V)

1.8

Vin (max) (V)

5.5

Vout (min) (V)

0.4

Vout (max) (V)

3.6

Switching frequency (min) (kHz)

1500

Switching frequency (max) (kHz)

1500

Features

1% accuracy, Enable, Light load efficiency, Output discharge, Over Current Protection, Pre-Bias Start-Up, Synchronous Rectification

Control mode

DCS-Control

Duty cycle (max) (%)

100

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Type

Module

Iout (max) (A)

0.6

Vin (min) (V)

1.8

Vin (max) (V)

5.5

Vout (min) (V)

0.4

Vout (max) (V)

3.6

Switching frequency (min) (kHz)

1500

Switching frequency (max) (kHz)

1500

Features

1% accuracy, Enable, Light load efficiency, Output discharge, Over Current Protection, Pre-Bias Start-Up, Synchronous Rectification

Control mode

DCS-Control

Duty cycle (max) (%)

100

QFN-FCMOD (VCF)

7

6.615 mm² 2.45 x 2.7

UNKNOWN (VCF)

7

See data sheet

1.8V to 5.5V input voltage range
0.4V to 3.6V output voltage range
275nA typical quiescent current, 4nA shutdown
Zero feedback error from integrated output divider
1.2V logic compliant EN (Enable) pin
600mA output current and output discharge
1% accurate voltage selection with single resistor on VSET-pin
- TPSM828436: 0.4V to 0.8V
- TPSM828437: 0.8V to 1.8V
- TPSM828438: 1.8V to 3.6V
Cost and size optimized passive components
- Down to 4.7µF CIN and COUT
- 0402 and 0201 capacitors supported
Low output voltage ripple in power save mode
RF-friendly and fast transient DCS-Control
Automatic transition to no ripple 100% mode
Small QFN package with 2.45mm × 2.70mm × 1.29mm

1.8V to 5.5V input voltage range
0.4V to 3.6V output voltage range
275nA typical quiescent current, 4nA shutdown
Zero feedback error from integrated output divider
1.2V logic compliant EN (Enable) pin
600mA output current and output discharge
1% accurate voltage selection with single resistor on VSET-pin
- TPSM828436: 0.4V to 0.8V
- TPSM828437: 0.8V to 1.8V
- TPSM828438: 1.8V to 3.6V
Cost and size optimized passive components
- Down to 4.7µF CIN and COUT
- 0402 and 0201 capacitors supported
Low output voltage ripple in power save mode
RF-friendly and fast transient DCS-Control
Automatic transition to no ripple 100% mode
Small QFN package with 2.45mm × 2.70mm × 1.29mm

The high efficiency TPSM82843x step-down converter family supports an ultra-low IQ (typical operating quiescent current) of 275nA and a typical shutdown current of only 4nA. The inductor is integrated into the QFN package improving ease of use and reducing the bill of material down to only three passive components.

The RF-friendly device uses DCS-Control for a low output voltage ripple. The device is designed to power wireless applications like Wi-Fi or Bluetooth. The device switches at 1.5MHz and has high efficiency even at light load current down to 10µA for long battery life and easy thermal management. Humidity, temperature or vibration have no influence on the output voltage accuracy due to the integrated feedback divider. Therefore, the device is also an excellent choice for industrial point of load applications.

18 predefined output voltages per part number with 1% accuracy selected through a standard E48 (2%) or E96 (1%) resistor on the VSET pin support a large variety of applications.

The high efficiency TPSM82843x step-down converter family supports an ultra-low IQ (typical operating quiescent current) of 275nA and a typical shutdown current of only 4nA. The inductor is integrated into the QFN package improving ease of use and reducing the bill of material down to only three passive components.

The RF-friendly device uses DCS-Control for a low output voltage ripple. The device is designed to power wireless applications like Wi-Fi or Bluetooth. The device switches at 1.5MHz and has high efficiency even at light load current down to 10µA for long battery life and easy thermal management. Humidity, temperature or vibration have no influence on the output voltage accuracy due to the integrated feedback divider. Therefore, the device is also an excellent choice for industrial point of load applications.

18 predefined output voltages per part number with 1% accuracy selected through a standard E48 (2%) or E96 (1%) resistor on the VSET pin support a large variety of applications.

filter

기타 벅 모듈(통합 인덕터) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

관심 가지실만한 유사 제품

open-in-new

대안 비교

다른 핀 출력을 지원하지만 비교 대상 장치와 동일한 기능

TPS82740A

활성

200mA 스텝다운 컨버터 모듈(360nA IQ) Integrated load switch and DVS

TPS82740B

활성

200mA 스텝다운 컨버터 모듈(360nA IQ) Integrated load switch and DVS

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

3개 모두 보기

	유형	직함		날짜
*	Data sheet	TPSM82843x 1.8V to 5.5V, 600mA, Ultra-Low 275nA IQ , High Efficiency, Step-Down Converter With Integrated Inductor in a QFN Package datasheet (Rev. A)	PDF \| HTML	2024/11/19
	Certificate	TPSM82843678EVM057 EU Declaration of Conformity (DoC) (Rev. A)		2024/09/20
	EVM User's guide	TPSM82843xEVM-057 Evaluation Module User's Guide (Rev. A)	PDF \| HTML	2024/08/27

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

평가 보드

TPSM82843678EVM-057 — TPSM82843x 평가 모듈

TPSM82843x 평가 모듈(EVM)을 사용하면 2.45mm × 2.65mm × 1.27mm QFN 패키지의 275nA IQ를 갖춘 600mA, 스텝다운 컨버터 전원 모듈의 TPSM82843x 제품군을 쉽게 평가할 수 있습니다. EVM에는 1.8V~5.5V 사이의 높은 입력 전압에서 0.4V~3.6V 범위의 출력 전압을 생성하는 3개의 별도 회로가 포함되어 있습니다. TPSM82843x는 웨어러블, 스마트폰, 산업 장비와 같이 공간이 제약된 애플리케이션을 위한 POL(Point-of-Load) 컨버터용 고효율 및 초소형 (...)

사용 설명서: PDF | HTML