TRS3243E
- Single-chip and single-supply interface for IBM™ PC/AT™ serial port
- ESD Protection for RS-232 bus pins
- ±15-kV Human-body model (HBM)
- ±8-kV IEC61000-4-2, Contact discharge
- ±15-kV IEC61000-4-2, Air-gap discharge
- Meets or exceeds requirements of TIA/EIA-232-F and ITU v.28 standards
- Operates with 3-V to 5.5-V VCC supply
- Always-active noninverting receiver output (ROUT2B)
- Designed to transmit at a data rate up to 500 kbit/s
- Low standby current: 1 µA typical
- External capacitors: 4 × 0.1 µF
- Accepts 5-V logic input with 3.3-V supply
- Designed to be interchangeable with industry standard ’3243E devices
- Serial-mouse driveability
- Auto-powerdown feature to disable driver outputs when no valid RS-232 signal is sensed
- Package options include plastic small-outline (DW), shrink small-outline (DB), and thin shrink small-outline (PW)
The TRS3243E device consists of three line drivers, five line receivers, and a dual charge-pump circuit with ±15-kV ESD (HBM and IEC61000-4-2, Air-Gap Discharge) and ±8-kV ESD (IEC61000-4-2, Contact Discharge) protection on serial-port connection pins. The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. This combination of drivers and receivers matches that needed for the typical serial port used in an IBM PC/AT, or compatible. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. In addition, the device includes an always-active noninverting output (ROUT2B), which allows applications using the ring indicator to transmit data while the device is powered down. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/µs driver output slew rate.
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | TRS3243E 3-V to 5.5-V Multichannel RS-232 Line Driver or Receiver With ±15-kV IEC ESD Protection datasheet (Rev. E) | PDF | HTML | 2022/12/23 |
Application note | RS-232 Glossary and Selection Guide | PDF | HTML | 2023/05/23 | |
Technical article | How the RS-232 transceiver’s regulated charge-pump circuitry works | PDF | HTML | 2018/06/28 | |
Application note | AN-438 Low Power RS-232C Driver and Receiver in CMOS (Rev. B) | 2013/04/26 | ||
Application note | Understanding Power Requirements in RS-232 Applications (Rev. B) | 2013/04/26 | ||
Application note | Removing Ground Noise in Data Transmission Systems | 2007/10/05 | ||
More literature | RS-232 IEC ESD-Protected Devices From TI (Rev. A) | 2007/07/27 | ||
Application note | Interface Circuits for TIA/EIA-232-F (Rev. A) | 2002/09/19 | ||
Application note | Low-Voltage, Single-Supply 232-Standard Interface Solutions (Rev. A) | 2000/09/19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
TIDA-060008 — RS-232 시그널을 RS-485 시그널로 변환하는 레퍼런스 설계
TIDA-00557 — 보호 릴레이, IED 및 변전소 자동화를 위한 RS-232 모뎀 인터페이스 모듈 레퍼런스 디자인
TIDA-00540 — RS-485/RS-232 다중 프로토콜 트랜시버 레퍼런스 디자인
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
SOIC (DW) | 28 | Ultra Librarian |
SSOP (DB) | 28 | Ultra Librarian |
TSSOP (PW) | 28 | Ultra Librarian |
VQFN (RHB) | 32 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.