TS3DV642-Q1
- Automotive Q100 qualified
- Temperature range of -40 to 105 °C (grade 2)
- Support 6 differential or 12 single-ended signals or other differential/single ended combinations
- Supports HDMI 1.4b / 2.0, DisplayPort 1.4 HBR2, DP++, Mipi DPHY / CPHY DSI / CSI-2, LVDS
- Bidirectional analog mux - handles most electrical signals within 0 to 5.5 V and DC to 6 Gbps range
- –3-dB differential BW of 5.8 GHz
- Excellent dynamic characteristics
- Insertion loss: –1.6 dB at 3.0 GHz
- Return loss: –17 dB at 3.0 GHz
- Support 1.8 V, 3.3 V or 5.0 V control logic
- Single supply voltage of 3.3 V
- Low active (45 µA) and standby power (6 µA)
- IOFF protection that prevents current leakage when supply rail collapsed (VCC = 0 V)
- ESD Performance of 3 kV HBM and 1 kV CDM
- 42-pin, 3.5 x 9 mm, 0.5 mm pitch WQFN package with wettable flank
The TS3DV642-Q1 is an analog high-speed bidirectional passive switch in mux or demux configurations that works for many high-speed differential interfaces with data rates up to 6 Gbps. It is suited for many applications including HDMI 1.4 / 2.0, DisplayPort 1.4 and Mipi DPHY / CPHY DSI / CSI-2. The TS3DV642-Q1 supports both differential and single-ended signaling - virtually compatible to most standard and non standard interfaces. The dynamic characteristics of the TS3DV642-Q1 allows high-speed switching with minimal attenuation to the signal eye diagram, and with very little added jitter. The device’s silicon design is optimized for excellent frequency response at higher frequency spectrum of the signals. The device supports differential signaling with common mode voltage range (CMV) of 0 to 3.6 V. The device also supports 0 - 5.5 V single-ended CMOS signals.
The TS3DV642-Q1 consumes very low active power of 45 µA. The device also offers a power-down mode, in which all channels become Hi-Z and the device operates with minimal power.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TS3DV642-Q1 6-Gbps 12-Channel differential 1-to-2 and 2-to-1 mux datasheet (Rev. A) | PDF | HTML | 2021/05/21 |
| Product overview | Mipi Switches | PDF | HTML | 2022/01/14 | |
| Certificate | TS3DV642Q1EVM-105 EU RoHS Declaration of Conformity (DoC) | 2020/12/03 | ||
| EVM User's guide | TS3DV642-Q1 Evaluation Module User's Guide | 2020/11/23 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TS3DV642Q1EVM-105 — 1.8V 호환 제어 전원 다운 모드를 지원하는 TS3DV642-Q1 12채널 1:2 mux/demux 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| WQFN (RUA) | 42 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.