TUSB2E11
- USB 2.0 and eUSB2 (rev 1.2) compliant
- Low-speed, full-speed, high-speed signaling
- Best-in-class high-speed total jitter of 20ps
- Register access protocol receptor capable
- Host and device mode (dual-role device) support
- Auto detection for I2C or strap-pin options
- Three strap-pins for USB 2.0 high-speed channel compensation settings
- I2C device interface for more configurations
- Device variants
- eUSB2 1.0V or 1.2V signaling interface
- eUSB2 trace loss compensation levels for different product form-factors
- 1.2V or 1.8V I2C interface
- Optional battery charging and detection support
- BC 1.2 CDP or DCP divider mode advertising
- Data-aware USB Type-C™ compatible BC 1.2 SDP, CDP, and DCP divider mode detection
- Dual-role auto switching between charger advertising or detection
- CTA-936 USB Carkit UART support
- Supports auto-resume ECR as well as L2 interrupt resume mode
- Optional GPIOs: interrupt GPIO2, debug, I2C ↔ GPIO0/1
- I2C accessible debug capabilities for manufacturing tests
The TUSB2E11 is a USB compliant eUSB2 to USB 2.0 repeater supporting both device and host modes.
The device supports USB low-speed (LS), full-speed (FS) signals, and high-speed (HS) signals.
The device has multiple patented designs to provide robust interoperability, optimum performance, and power.
For systems without an I2C interface, the device offers eight individual settings with three strap-pins for USB 2.0 channel Equivalent Series Resistance (ESR) up to 20Ω. Device variants are available for different levels of eUSB2 trace length compensation up to 10 inches.
The I2C interface permits additional flexibility for fine tuning of device RX equalization and TX amplitude, slew rate and pre-emphasis to pass electrical compliance tests and compensate for channel loss.
Various debug options are available through the three GPIO pins that can be configured to monitor various USB bus states or interrupt as well as CTA-936 UART mode that can provide SoC debug capabilities. GPIO0 and GPIO1 can be used as general purpose I2C to GPIOs bridge.
기술 자료
| 유형 | 직함 | 날짜 | ||
|---|---|---|---|---|
| * | Data sheet | TUSB2E11 USB 2.0-eUSB2 Repeater datasheet (Rev. E) | PDF | HTML | 2024/11/15 |
| EVM User's guide | TUSB2E11 Evaluation Module User's Guide | PDF | HTML | 2022/05/19 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
TUSB2E11EVM — eUSB2-USB 2.0 단일 채널 리피터용 TUSB2E11 평가 모듈
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
| 패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
|---|---|---|
| DSBGA (YCG) | 15 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.