홈 전원 관리 멀티 채널 IC(PMIC)
홈
전원 관리
멀티 채널 IC(PMIC)

TWL6030

새 설계에 권장하지 않음

스위치 모드 충전기를 지원하는 완전 통합형 전원 관리 IC(PMIC)

지금 주문
데이터 시트
TWL6030은(는) 새 설계에 권장하지 않습니다.
이 제품은 기존 고객을 위해 계속 제공됩니다. 새로운 설계는 대체 제품을 고려해야 합니다.
open-in-new 대안 비교
비교 대상 장치와 유사한 기능
TPS65218D0 활성 ARM® Cortex™-A8/A9 SOC 및 FPGA용 통합 전원 관리(PMIC) Lowest power consumption PMIC for powering Sitara™ AM437x processors in EPOS applications.

TWL6030

새 설계에 권장하지 않음
데이터 시트 지금 주문

제품 상세 정보

Processor supplier Texas Instruments Processor name OMAP Vin (min) (V) 2.5 Vin (max) (V) 4.8 Vout (min) (V) 0.6 Vout (max) (V) 3.3 Iout (max) (A) 2 Features Comm control Rating Catalog Operating temperature range (°C) -40 to 85 Product type Processor and FPGA
Processor supplier Texas Instruments Processor name OMAP Vin (min) (V) 2.5 Vin (max) (V) 4.8 Vout (min) (V) 0.6 Vout (max) (V) 3.3 Iout (max) (A) 2 Features Comm control Rating Catalog Operating temperature range (°C) -40 to 85 Product type Processor and FPGA
FCCSP (CMR) 187 49 mm² 7 x 7
  • Seven highly efficient 6-MHz buck converters
    • Two 0.6 to 2.1 V @ 1.6 A
    • Five 0.6 to 2.1 V @ 1.0 A
  • 11 General-purpose LDOs
    • Six 1.0 to 3.3 V @ 0.2 A with battery or preregulated supply
      (One can be used as a vibrator driver.)
    • One 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
    • One low noise 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
    • 3.3 V @ 35 mA USB LDO
    • One LDO for TWL6030 internal use
    • One LDO for internal and external use
  • USB OTG module
  • Backup battery charger
  • 10-bit ADC with 17 input channels
  • 13-bit Coulomb counter with four programmable integration periods
  • Low power consumption
    • 5 µA in backup mode
    • 20 µA in wait-on mode
    • 110 µA in deep sleep, with two DCDCs active
  • RTC with alarm wake-up mechanism
  • SIM and MMC card detections
  • Two digital PWM outputs
  • Thermal monitoring
    • High-temperature warning
    • Thermal shutdown
  • Control
    • Configurable power-up and power-down sequences (EPROM programmable)
    • Three output signals that can be included in the start-up sequence
    • Two I2C™ interfaces
    • All resources configurable by I2C
  • Clock management
    32-kHz output
  • Battery charger 1.5 A
    • Charger for single-cell Li-Ion and Li-Polymer battery packs
    • Switched mode charger with integrated power FET for up to 1.5-A current
    • High-accuracy voltage and current regulation
    • Safety timer and reset control
    • Thermal regulation protection
    • Input/output overvoltage protection
    • Charging indicator LED driver
    • Boost mode operation for USB OTG
    • Compliant with:
      • USB 2.0
      • OTG and EH 2.0
      • YD/T 1591-2006
      • USB battery charging 1.1 and 1.2
      • Japanese battery charging requirements
  • Package 7 mm × 7 mm 187-pin nFBGA
  • Seven highly efficient 6-MHz buck converters
    • Two 0.6 to 2.1 V @ 1.6 A
    • Five 0.6 to 2.1 V @ 1.0 A
  • 11 General-purpose LDOs
    • Six 1.0 to 3.3 V @ 0.2 A with battery or preregulated supply
      (One can be used as a vibrator driver.)
    • One 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
    • One low noise 1.0 to 3.3 V @ 50 mA with battery or preregulated supply
    • 3.3 V @ 35 mA USB LDO
    • One LDO for TWL6030 internal use
    • One LDO for internal and external use
  • USB OTG module
  • Backup battery charger
  • 10-bit ADC with 17 input channels
  • 13-bit Coulomb counter with four programmable integration periods
  • Low power consumption
    • 5 µA in backup mode
    • 20 µA in wait-on mode
    • 110 µA in deep sleep, with two DCDCs active
  • RTC with alarm wake-up mechanism
  • SIM and MMC card detections
  • Two digital PWM outputs
  • Thermal monitoring
    • High-temperature warning
    • Thermal shutdown
  • Control
    • Configurable power-up and power-down sequences (EPROM programmable)
    • Three output signals that can be included in the start-up sequence
    • Two I2C™ interfaces
    • All resources configurable by I2C
  • Clock management
    32-kHz output
  • Battery charger 1.5 A
    • Charger for single-cell Li-Ion and Li-Polymer battery packs
    • Switched mode charger with integrated power FET for up to 1.5-A current
    • High-accuracy voltage and current regulation
    • Safety timer and reset control
    • Thermal regulation protection
    • Input/output overvoltage protection
    • Charging indicator LED driver
    • Boost mode operation for USB OTG
    • Compliant with:
      • USB 2.0
      • OTG and EH 2.0
      • YD/T 1591-2006
      • USB battery charging 1.1 and 1.2
      • Japanese battery charging requirements
  • Package 7 mm × 7 mm 187-pin nFBGA

The TWL6030 device is an integrated power-management integrated circuit (IC) for applications powered by a rechargeable battery. The device provides seven configurable step-down converters with up to 1.6A capability for memory, processor core, I/O, auxiliary, preregulation for LDOs, etc. The device also contains 11 LDO regulators that can be supplied from a battery or a preregulated supply. Power-up/power-down controller is configurable and can support any power-up/power-down sequences (EPROM based). The real-time clock (RTC) provides a 32-kHz output buffer, second/minute/hour/day/month/year information, and alarm wake up. The TWL6030 supports 32-kHz clock generation based on a crystal oscillator. The device integrates a switched-mode charger allowing faster battery charge, higher efficiency, and less power dissipation.

The TWL6030 device generates power supplies for OMAP™ 4 processors and operates together with the TWL6040 device, which includes all audio and related detection features. For audio IC parameters, see the TWL6040 datasheet. In addition, the TWL6030 device can be used as a power management multichannel IC (PMIC) for several other processors, thanks to the programmable startup/shutdown controller and default supply voltage levels. The TWL6030 is available in an nFBGA package, 7.0 mm x 7.0 mm, with a 0.4-mm ball pitch.

shows the TWL6030 block diagram.

The TWL6030 device is an integrated power-management integrated circuit (IC) for applications powered by a rechargeable battery. The device provides seven configurable step-down converters with up to 1.6A capability for memory, processor core, I/O, auxiliary, preregulation for LDOs, etc. The device also contains 11 LDO regulators that can be supplied from a battery or a preregulated supply. Power-up/power-down controller is configurable and can support any power-up/power-down sequences (EPROM based). The real-time clock (RTC) provides a 32-kHz output buffer, second/minute/hour/day/month/year information, and alarm wake up. The TWL6030 supports 32-kHz clock generation based on a crystal oscillator. The device integrates a switched-mode charger allowing faster battery charge, higher efficiency, and less power dissipation.

The TWL6030 device generates power supplies for OMAP™ 4 processors and operates together with the TWL6040 device, which includes all audio and related detection features. For audio IC parameters, see the TWL6040 datasheet. In addition, the TWL6030 device can be used as a power management multichannel IC (PMIC) for several other processors, thanks to the programmable startup/shutdown controller and default supply voltage levels. The TWL6030 is available in an nFBGA package, 7.0 mm x 7.0 mm, with a 0.4-mm ball pitch.

shows the TWL6030 block diagram.
filter 기타 멀티 채널 IC(PMIC) 찾기
다운로드

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
1개 모두 보기
유형 직함 날짜
* Data sheet TWL6030 DM Version C datasheet (Rev. C) 2011/07/04

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치