전원 관리 AC/DC 및 DC/DC 컨트롤러(외장 FET)

UCC3802

활성

12.5V/8.3V UVLO 및 100% 듀티 사이클, 0CC~70C를 지원하는 12V, 1A 저전력 BiCMOS 1MHz 전류 모드 PWM

제품 상세 정보

Vin (max) (V) 12 Operating temperature range (°C) 0 to 70 Control mode Current Topology Boost, Flyback Rating Catalog Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 100
Vin (max) (V) 12 Operating temperature range (°C) 0 to 70 Control mode Current Topology Boost, Flyback Rating Catalog Features Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Leading edge blanking, Multi-topology, Soft start Duty cycle (max) (%) 100
SOIC (D) 8 29.4 mm² 4.9 x 6 TSSOP (PW) 8 19.2 mm² 3 x 6.4
  • 100-µA typical starting supply current
  • 500-µA typical operating supply current
  • Operation up to 1 MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current sense signal
  • 1-A totem-pole output
  • 70-ns typical response from current-sense to gate drive output
  • 1.5% tolerance voltage reference
  • Same pinout as UC3842 and UC3842A
  • 100-µA typical starting supply current
  • 500-µA typical operating supply current
  • Operation up to 1 MHz
  • Internal soft start
  • Internal fault soft start
  • Internal leading-edge blanking of the current sense signal
  • 1-A totem-pole output
  • 70-ns typical response from current-sense to gate drive output
  • 1.5% tolerance voltage reference
  • Same pinout as UC3842 and UC3842A

The UCC280x family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching mode power supplies with minimal parts count.

These devices have the same pin configuration as the UCx84x family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC280x family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching mode power supplies with minimal parts count.

These devices have the same pin configuration as the UCx84x family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
22개 모두 보기
유형 직함 날짜
* Data sheet UCC280x Low-Power BiCMOS Current-Mode PWM Controllers datasheet (Rev. G) PDF | HTML 2020/05/12
Application note Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps (Rev. A) PDF | HTML 2021/06/11
Application note Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B) 2019/03/12
Selection guide Power Management Guide 2018 (Rev. R) 2018/06/25
User guide UCC3813 Dual Output Boost Converter 2003/10/09
Application note Dual Output Boost Converter 2003/04/09
Application note UCC38C42 Family of High-Speed BiCMOS Current-Mode PWM Controllers 2002/02/07
More literature Seminar 300 Topic 8 - Switching Power Supply Design Review 2001/02/15
More literature Seminar 400 Topic 2 - Design of Flyback Transformers and Filter Inductors 2001/02/15
More literature Seminar 900 Topic 6 - High Power Factor Prereg Using SEPIC 2001/02/15
Application note Differences Between the UCC3813 and the UCC3800 PWM Families 2000/06/02
Application note DN-30 Programmable Electronic Circuit Breaker 1999/09/05
Application note DN-42A Design Considerations for Transitioning from UC3842 to the New UCC3802 1999/09/05
Application note DN-43 Simple Techniques to Generate a Negative Voltage Bias Supply 1999/09/05
Application note DN-46 Highly Efficient Low Power DC to DC Inverter Converts +5V Input to -3V Out 1999/09/05
Application note DN-48 Versatile Low Power SEPIC Converter Accepts Wide Input Voltage Range 1999/09/05
Application note DN-54 Innovative Buck Regulator Uses High Side N-Channel Switch Without Complex 1999/09/05
Application note DN-56A, Single Switch Flyback Circuit Converts + 5 V to +/- 12 V for RS-232/422 1999/09/05
Application note DN-65 Considerations in Powering BiCMOS ICs 1999/09/05
Application note DN-89 Comparing the UC3842, UCC3802, and UCC3809 Primary Side PWM Controllers 1999/09/05
Application note U-111, Practical Considerations in Current Mode Power Supplies 1999/09/05
Application note U-133A UCC3800/1/2/3/4/5 BiCMOS Current Mode Control IC's 1999/09/05

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

시뮬레이션 모델

UCCX802 & UCCX813-2 TINA-TI Startup Reference Design

SLUM225.TSC (668 KB) - TINA-TI Reference Design
시뮬레이션 모델

UCCX802 & UCCX813-2 TINA-TI Steady State Reference Design

SLUM223.TSC (669 KB) - TINA-TI Reference Design
시뮬레이션 모델

UCCX802 & UCCX813-2 TINA-TI Transient Spice Model

SLUM224.ZIP (29 KB) - TINA-TI Spice Model
시뮬레이션 모델

UCCx802 & UCCx813-2 Unencrypted PSpice Transient Model

SLUM514.ZIP (6 KB) - PSpice Model
시뮬레이션 모델

UCCx813-2, UCCx802 Families PSpice Transient Model (Rev. B)

SLUM067B.ZIP (87 KB) - PSpice Model
패키지 CAD 기호, 풋프린트 및 3D 모델
SOIC (D) 8 Ultra Librarian
TSSOP (PW) 8 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상