UCC3804

활성

12.5V/8.3V UVLO 및 50% 듀티 사이클, 0C~70C를 지원하는 12V, 1A 저전력 BICMOS 1MHz 전류 모드 PWM

지금 주문

데이터 시트

document-pdfAcrobat UCC280x Low-Power BiCMOS Current-Mode PWM Controllers datasheet (Rev. G) (영어) PDF | HTML

UCC3804

활성

데이터 시트

지금 주문

제품 상세 정보

Vin (max) (V)

12

Operating temperature range (°C)

0 to 70

Control mode

Current

Topology

Boost, Flyback

Rating

Catalog

Features

Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Leading edge blanking, Multi-topology, Soft start

Duty cycle (max) (%)

50

Vin (max) (V)

12

Operating temperature range (°C)

0 to 70

Control mode

Current

Topology

Boost, Flyback

Rating

Catalog

Features

Adjustable switching frequency, Current limiting, Dead time control, Error amplifier, Leading edge blanking, Multi-topology, Soft start

Duty cycle (max) (%)

50

PDIP (P)

8

92.5083 mm² 9.81 x 9.43

SOIC (D)

8

29.4 mm² 4.9 x 6

TSSOP (PW)

8

19.2 mm² 3 x 6.4

100-µA typical starting supply current
500-µA typical operating supply current
Operation up to 1 MHz
Internal soft start
Internal fault soft start
Internal leading-edge blanking of the current sense signal
1-A totem-pole output
70-ns typical response from current-sense to gate drive output
1.5% tolerance voltage reference
Same pinout as UC3842 and UC3842A

100-µA typical starting supply current
500-µA typical operating supply current
Operation up to 1 MHz
Internal soft start
Internal fault soft start
Internal leading-edge blanking of the current sense signal
1-A totem-pole output
70-ns typical response from current-sense to gate drive output
1.5% tolerance voltage reference
Same pinout as UC3842 and UC3842A

The UCC280x family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching mode power supplies with minimal parts count.

These devices have the same pin configuration as the UCx84x family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

The UCC280x family of high-speed, low-power integrated circuits contain all of the control and drive components required for off-line and DC-to-DC fixed frequency current-mode switching mode power supplies with minimal parts count.

These devices have the same pin configuration as the UCx84x family, and also offer the added features of internal full-cycle soft start and internal leading-edge blanking of the current-sense input.

filter

기타 AC/DC 및 DC/DC 컨트롤러(외장 FET) 찾기

다운로드 스크립트와 함께 비디오 보기 동영상

기술 자료

star

=TI에서 선정한 이 제품의 인기 문서

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.

21개 모두 보기

	유형	직함		날짜
*	Data sheet	UCC280x Low-Power BiCMOS Current-Mode PWM Controllers datasheet (Rev. G)	PDF \| HTML	2020/05/12
	Application note	Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps (Rev. A)	PDF \| HTML	2021/06/11
	Application note	Understanding Inverting Buck-Boost Power Stages in Switch Mode Power Supplies (Rev. B)		2019/03/12
	Selection guide	Power Management Guide 2018 (Rev. R)		2018/06/25
	User guide	UCC3813 Dual Output Boost Converter		2003/10/09
	Application note	Dual Output Boost Converter		2003/04/09
	Application note	UCC38C42 Family of High-Speed BiCMOS Current-Mode PWM Controllers		2002/02/07
	More literature	Seminar 300 Topic 8 - Switching Power Supply Design Review		2001/02/15
	More literature	Seminar 400 Topic 2 - Design of Flyback Transformers and Filter Inductors		2001/02/15
	More literature	Seminar 900 Topic 6 - High Power Factor Prereg Using SEPIC		2001/02/15
	Application note	Differences Between the UCC3813 and the UCC3800 PWM Families		2000/06/02
	Application note	DN-30 Programmable Electronic Circuit Breaker		1999/09/05
	Application note	DN-42A Design Considerations for Transitioning from UC3842 to the New UCC3802		1999/09/05
	Application note	DN-43 Simple Techniques to Generate a Negative Voltage Bias Supply		1999/09/05
	Application note	DN-46 Highly Efficient Low Power DC to DC Inverter Converts +5V Input to -3V Out		1999/09/05
	Application note	DN-48 Versatile Low Power SEPIC Converter Accepts Wide Input Voltage Range		1999/09/05
	Application note	DN-54 Innovative Buck Regulator Uses High Side N-Channel Switch Without Complex		1999/09/05
	Application note	DN-56A, Single Switch Flyback Circuit Converts + 5 V to +/- 12 V for RS-232/422		1999/09/05
	Application note	DN-65 Considerations in Powering BiCMOS ICs		1999/09/05
	Application note	U-111, Practical Considerations in Current Mode Power Supplies		1999/09/05
	Application note	U-133A UCC3800/1/2/3/4/5 BiCMOS Current Mode Control IC's		1999/09/05