DS89C21

現行

差動 CMOS 線路驅動器和接收器對

立即訂購

產品規格表

document-pdfAcrobat DS89C21 Differential CMOS Line Driver and Receiver Pair datasheet (Rev. C) (英文)

DS89C21

現行

產品規格表

立即訂購

產品詳細資料

Number of receivers

Number of transmitters

Duplex

Full

Supply voltage (nom) (V)

Signaling rate (max) (Mbps)

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-12 to 12

Common-mode range (V)

-7 to 7

Number of nodes

Isolated

Supply current (max) (µA)

6000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of receivers

Number of transmitters

Duplex

Full

Supply voltage (nom) (V)

Signaling rate (max) (Mbps)

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-12 to 12

Common-mode range (V)

-7 to 7

Number of nodes

Isolated

Supply current (max) (µA)

6000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (D)

29.4 mm² 4.9 x 6

Meets TIA/EIA-422-A (RS-422) and CCITT V.11 Recommendation
LOW POWER Design—15 mW Typical
Guaranteed AC Parameters:
- Maximum Driver Skew 2.0 ns
- Maximum Receiver Skew 4.0 ns
Extended Temperature Range: −40°C to +85°C
Available in SOIC Packaging
Operates over 20 Mbps
Receiver OPEN Input Failsafe Feature

All trademarks are the property of their respective owners.

Meets TIA/EIA-422-A (RS-422) and CCITT V.11 Recommendation
LOW POWER Design—15 mW Typical
Guaranteed AC Parameters:
- Maximum Driver Skew 2.0 ns
- Maximum Receiver Skew 4.0 ns
Extended Temperature Range: −40°C to +85°C
Available in SOIC Packaging
Operates over 20 Mbps
Receiver OPEN Input Failsafe Feature

All trademarks are the property of their respective owners.

The DS89C21 is a differential CMOS line driver and receiver pair, designed to meet the requirements of TIA/EIA-422-A (RS-422) electrical characteristics interface standard. The DS89C21 provides one driver and one receiver in a minimum footprint. The device is offered in an 8-pin SOIC package.

The CMOS design minimizes the supply current to 6 mA, making the device ideal for use in battery powered or power conscious applications.

The driver features a fast transition time specified at 2.2 ns, and a maximum differential skew of 2 ns making the driver ideal for use in high speed applications operating above 10 MHz.

The receiver can detect signals as low as 200 mV, and also incorporates hysteresis for noise rejection. Skew is specified at 4 ns maximum.

The DS89C21 is compatible with TTL and CMOS levels (DI and RO).

The CMOS design minimizes the supply current to 6 mA, making the device ideal for use in battery powered or power conscious applications.

The driver features a fast transition time specified at 2.2 ns, and a maximum differential skew of 2 ns making the driver ideal for use in high speed applications operating above 10 MHz.

The receiver can detect signals as low as 200 mV, and also incorporates hysteresis for noise rejection. Skew is specified at 4 ns maximum.

The DS89C21 is compatible with TTL and CMOS levels (DI and RO).

filter

尋找其它 RS-485 & RS-422 收發器

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

引腳對引腳且具備與所比較裝置相同的功能

THVD1551

現行

具 ±18kV IEC ESD 防護的 5V RS-485 收發器 Pin-to-pin device that offers integrated IEC ESD protection (18-kV contact discharge), IEC EFT (4-kV noise immunity), and extended common voltage range

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 1

	類型	標題		日期
*	Data sheet	DS89C21 Differential CMOS Line Driver and Receiver Pair datasheet (Rev. C)		2013年 4月 25日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

DS89C21 IBIS Model

SNLM073.ZIP (11 KB) - IBIS Model

下載

模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)

要求

模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

使用指南: PDF

View Options