首頁 介面 LVDS、M-LVDS 和 PECL IC
首頁
介面
LVDS、M-LVDS 和 PECL IC

DS90LV011AH

現行

高溫 3V LVDS 差動驅動器

立即訂購
產品規格表

DS90LV011AH

現行
產品規格表 立即訂購

產品詳細資料

Function Driver Protocols LVDS Number of transmitters 1 Number of receivers 0 Supply voltage (V) 3.3 Signaling rate (Mbps) 400 Input signal LVCMOS, LVTTL Output signal LVDS Rating Catalog Operating temperature range (°C) -40 to 125
Function Driver Protocols LVDS Number of transmitters 1 Number of receivers 0 Supply voltage (V) 3.3 Signaling rate (Mbps) 400 Input signal LVCMOS, LVTTL Output signal LVDS Rating Catalog Operating temperature range (°C) -40 to 125
SOT-23 (DBV) 5 8.12 mm² 2.9 x 2.8
  • –40°C to 125°C operating temperature range
  • Conforms to TIA/EIA-644-A standard
  • >400-Mbps (200-MHz) switching rates
  • 700-ps (100-ps typical) maximum differential skew
  • 1.5-ns maximum propagation delay
  • Single 3.3-V power supply
  • ±350-mV differential signaling
  • Power off protection (outputs in TRI-STATE)
  • Pinout simplifies PCB layout
  • Low power dissipation (23 mW at 3.3 V typical)
  • 5-Pin SOT-23 package
  • Pin compatible with SN65LVDS1
  • –40°C to 125°C operating temperature range
  • Conforms to TIA/EIA-644-A standard
  • >400-Mbps (200-MHz) switching rates
  • 700-ps (100-ps typical) maximum differential skew
  • 1.5-ns maximum propagation delay
  • Single 3.3-V power supply
  • ±350-mV differential signaling
  • Power off protection (outputs in TRI-STATE)
  • Pinout simplifies PCB layout
  • Low power dissipation (23 mW at 3.3 V typical)
  • 5-Pin SOT-23 package
  • Pin compatible with SN65LVDS1

The DS90LV011AH is an LVDS driver optimized for high data rate and low power applications. The DS90LV011AH is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short circuit fault current is also minimized. The device is designed to support data rates in excess of 400Mbps (200MHz) utilizing Low Voltage Differential Signaling (LVDS) technology.

The device is offered in a 5-pin SOT-23 package. The LVDS outputs have been arranged for easy PCB layout. The differential driver outputs provide low electromagnetic interference (EMI) with its typical low output swing of 350 mV. The DS90LV011AH can be paired with its companion single line receiver, the DS90LT012AH, or with any of TI’s LVDS receivers, to provide a high-speed LVDS interface.

The DS90LV011AH is an LVDS driver optimized for high data rate and low power applications. The DS90LV011AH is a current mode driver allowing power dissipation to remain low even at high frequency. In addition, the short circuit fault current is also minimized. The device is designed to support data rates in excess of 400Mbps (200MHz) utilizing Low Voltage Differential Signaling (LVDS) technology.

The device is offered in a 5-pin SOT-23 package. The LVDS outputs have been arranged for easy PCB layout. The differential driver outputs provide low electromagnetic interference (EMI) with its typical low output swing of 350 mV. The DS90LV011AH can be paired with its companion single line receiver, the DS90LT012AH, or with any of TI’s LVDS receivers, to provide a high-speed LVDS interface.
filter 尋找其它 LVDS、M-LVDS 和 PECL IC
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
DS90LV011AQ-Q1 現行 車用 LVDS 差動驅動器 Automotive grade with temperature range from –40°C to +125°C

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
類型 標題 日期
* Data sheet DS90LV011AH High Temperature 3-V LVDS Differential Driver datasheet (Rev. C) PDF | HTML 2021年 7月 12日
Application note An Overview of LVDS Technology 1998年 10月 5日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

DS90LV047-48AEVM — DS90LV047-48AEVM 評估模組

The DS90LV047-48AEVM is an evaluation module (EVM) designed for performance and functional evaluation of Texas Instruments' DS90LV047A 3-V LVDS quad CMOS differential line driver and DS90LV048A 3-V LVDS CMOS differential line receiver. With this kit, users can quickly evaluate the output (...)
使用指南: PDF
TI.com 無法提供
模擬型號

DS90LV011A IBIS Model

SNLM047.ZIP (17 KB) - IBIS Model
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23 (DBV) 5 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片