LM26484
- Step-Down DC/DC Converter (Buck)
- 3.0–5.5V Input Range
- Externally Adjustable VOUT:
- Bucks 1 & 2: 0.8V–3.5V @ 2A
- 180° Phase Shift Between Bucks Clocks
- 2 MHz PWM Switching Frequency
- ±1% feedback Voltage Accuracy
- Automatic Soft Start
- Current Overload Protection
- PWM/PFM efficiency Modes Available
- Linear Regulator (LDO) Controller
- 3.0V–5.5V Input Range
- Externally Adjustable VOUT
- ±1.5% Feedback Voltage Accuracy
- Regulated to Low VIN - Low VOUT LI-LO (Low Input Low Output) NFET Operation
- Input to the LI-LO Configuration, Can Be Post Regulated When Supply is Regulated by Buck2
- Up to 1000 mA Output Current by Selection of External FET
All trademarks are the property of their respective owners.
The LM26484 is a multi-function, configurable Power Management Unit. This device integrates two highly efficient 2.0A Step-Down DC/DC converters, one LDO Controller, a POR (Power On Reset) circuit, and thermal overload protection circuitry. All regulator output voltages are externally adjustable. The LDO controller is a low-voltage NMOS voltage regulator. The LM26484 is offered in a 5 x 4 x 0.8 mm WQFN-24 pin package.
技術文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 3 類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | LM26484 Power Management Unit datasheet (Rev. F) | 2013年 3月 7日 | |
Application note | Parasitics can Hinder Switcher Regulator and LDO Designs (Rev. A) | 2014年 7月 1日 | ||
EVM User's guide | LM26484 Power Management Unit Evaluation Board Application Note (Rev. B) | 2013年 4月 29日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
WQFN (NHZ) | 24 | Ultra Librarian |
訂購與品質
內含資訊:
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊:
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。