LM2743

現行

具追蹤功能的 2.2-V 至 16-V 電壓模式同步降壓控制器

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相似於所比較的產品
最新 TPS54KB20 現行 4-V 至 16-V 輸入、25-A 遠端感測同步降壓轉換器 Higher power density integrated FET converter solution for up to 25A output current

產品詳細資料

Vin (min) (V) 2.2 Vin (max) (V) 16 Iout (max) (A) 20 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 13.5 Features Enable, Power good, Synchronous Rectification, Tracking Iq (typ) (µA) 1500 Duty cycle (max) (%) 80 Number of phases 1
Vin (min) (V) 2.2 Vin (max) (V) 16 Iout (max) (A) 20 Operating temperature range (°C) -40 to 125 Control mode Voltage mode Rating Catalog Vout (min) (V) 0.6 Vout (max) (V) 13.5 Features Enable, Power good, Synchronous Rectification, Tracking Iq (typ) (µA) 1500 Duty cycle (max) (%) 80 Number of phases 1
TSSOP (PW) 14 32 mm² 5 x 6.4
  • Power stage input voltage from 1 V to 16 V
  • Control stage input voltage from 3 V to 6 V
  • Output voltage adjustable down to 0.6 V
  • Power-good flag and shutdown
  • Output overvoltage and undervoltage detection
  • ±2% Feedback voltage accuracy over temperature
  • Low-side adjustable current sensing
  • Adjustable soft start
  • Tracking and sequencing with shutdown and soft-start pins
  • Switching frequency from 50 kHz to 1 MHz
  • TSSOP-14 package
  • Create a custom design using the LM2743 with the WEBENCH® Power Designer
  • Power stage input voltage from 1 V to 16 V
  • Control stage input voltage from 3 V to 6 V
  • Output voltage adjustable down to 0.6 V
  • Power-good flag and shutdown
  • Output overvoltage and undervoltage detection
  • ±2% Feedback voltage accuracy over temperature
  • Low-side adjustable current sensing
  • Adjustable soft start
  • Tracking and sequencing with shutdown and soft-start pins
  • Switching frequency from 50 kHz to 1 MHz
  • TSSOP-14 package
  • Create a custom design using the LM2743 with the WEBENCH® Power Designer

The LM2743 is a high-speed synchronous buck regulator controller with an accurate feedback voltage accuracy of ±2%. It can provide simple down conversion to output voltages as low as 0.6 V. Though the control sections of the IC are rated for 3 V to 6 V, the driver sections are designed to accept input supply rails as high as 16 V. The use of adaptive non-overlapping MOSFET gate drivers helps avoid potential shoot-through problems while maintaining high efficiency. The IC is designed for the more cost-effective option of driving only N-channel MOSFETs in both the high-side and low-side positions. It senses the low-side switch voltage drop for providing a simple, adjustable current limit.

The fixed-frequency voltage-mode PWM control architecture is adjustable from 50 kHz to 1 MHz with one external resistor. This wide range of switching frequency gives the power supply designer the flexibility to make better tradeoffs between component size, cost and efficiency.

Features include soft start, input undervoltage lockout (UVLO) and Power Good (based on both undervoltage and overvoltage detection). In addition, the shutdown pin of the IC can be used for providing start-up delay, and the soft-start pin can be used for implementing precise tracking, for the purpose of sequencing with respect to an external rail.

The LM2743 is a high-speed synchronous buck regulator controller with an accurate feedback voltage accuracy of ±2%. It can provide simple down conversion to output voltages as low as 0.6 V. Though the control sections of the IC are rated for 3 V to 6 V, the driver sections are designed to accept input supply rails as high as 16 V. The use of adaptive non-overlapping MOSFET gate drivers helps avoid potential shoot-through problems while maintaining high efficiency. The IC is designed for the more cost-effective option of driving only N-channel MOSFETs in both the high-side and low-side positions. It senses the low-side switch voltage drop for providing a simple, adjustable current limit.

The fixed-frequency voltage-mode PWM control architecture is adjustable from 50 kHz to 1 MHz with one external resistor. This wide range of switching frequency gives the power supply designer the flexibility to make better tradeoffs between component size, cost and efficiency.

Features include soft start, input undervoltage lockout (UVLO) and Power Good (based on both undervoltage and overvoltage detection). In addition, the shutdown pin of the IC can be used for providing start-up delay, and the soft-start pin can be used for implementing precise tracking, for the purpose of sequencing with respect to an external rail.

下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 10
類型 標題 日期
* Data sheet LM2743 2.2-V to 16-V Input, voltage mode, synchronous buck controller with tracking datasheet (Rev. I) PDF | HTML 2019年 2月 20日
User guide LM2744 Buck Controller Evaluation Module User's Guide (Rev. B) PDF | HTML 2022年 2月 23日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Analog Design Journal Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics 2016年 7月 21日
Application note AN-1603 LM274X Reference Designs (Rev. C) 2013年 5月 1日
EVM User's guide AN-1356 LM2743 Evaluation Board (Rev. A) 2013年 4月 30日
EVM User's guide AN-1640 LM2743-19A Demo Board (Rev. A) 2013年 4月 26日
Application note Current Limit Foldback Improves Short Circuit Protection in LM274X Family (Rev. B) 2013年 4月 23日
Application note Optmiz Pwr Cntrlr Dsigns thru Utiliz Freq & Sync, Ext Ref, Trking & Precis EN 2008年 4月 24日
Application note Power Management Considerations for FPGAs and ASICs 2007年 3月 22日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LM2743EVAL — 低電壓 N 通道 MOSFET 同步降壓穩壓器控制器評估模組

LM2743 N-Channel FET Synchronous Buck Regulator Controller for Conversion from 3.3V

使用指南: PDF
TI.com 無法提供
模擬型號

LM2743 PSpice Average Model

SNVM432.ZIP (58 KB) - PSpice Model
模擬型號

LM2743 PSpice Transient Model

SNVM431.ZIP (226 KB) - PSpice Model
模擬型號

LM2743 Unencrypted PSpice Average Model

SNVM846.ZIP (1 KB) - PSpice Model
模擬型號

LM2743 Unencrypted PSpice Transient Model

SNVM845.ZIP (3 KB) - PSpice Model
參考設計

PMP30197 — 具有光電耦合器的 5.85W 隔離式自驅同步反相 Fly-Buck 升壓參考設計

The PMP30197 reference design is an inverting Fly-BuckBoost power supply using the LM2743 to generate an isolated output voltage of 3.9V. The design accepts an input voltage of 2V to 5.25V.  The converter regulates the secondary side output with an optocoupler and is capable of achieving good (...)
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TSSOP (PW) 14 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片