LM5021

現行

30V、1MHZ 電流模式 PWM 控制器

產品詳細資料

Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback, Forward Rating Catalog Features CCM, DCM, Frequency synchronization, Leading edge blanking, Secondary-side regulated, Skip cycle mode, Slope compensation Duty cycle (max) (%) 80
Operating temperature range (°C) -40 to 125 Control mode Secondary-side regulation Topology Flyback, Forward Rating Catalog Features CCM, DCM, Frequency synchronization, Leading edge blanking, Secondary-side regulated, Skip cycle mode, Slope compensation Duty cycle (max) (%) 80
PDIP (P) 8 92.5083 mm² 9.81 x 9.43 VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Ultra Low Start-up Current (25 µA maximum)
  • Current Mode Control
  • Skip Cycle Mode for Low Standby Power
  • Single Resistor Programmable Oscillator
  • Synchronizable Oscillator
  • Adjustable Soft-Start
  • Integrated 0.7 A Peak Gate Driver
  • Direct Opto-Coupler Interface
  • Maximum Duty Cycle Limiting (80% for LM5021-1
    or 50% for LM5021-2)
  • Slope Compensation (LM5021-1 Only)
  • Under Voltage Lockout (UVLO) with Hysteresis
  • Cycle-by-Cycle Over-Current Protection
  • Hiccup Mode for Continuous Overload Protection
  • Leading Edge Blanking of Current Sense Signal
  • Packages: VSSOP-8 or PDIP-8
  • Ultra Low Start-up Current (25 µA maximum)
  • Current Mode Control
  • Skip Cycle Mode for Low Standby Power
  • Single Resistor Programmable Oscillator
  • Synchronizable Oscillator
  • Adjustable Soft-Start
  • Integrated 0.7 A Peak Gate Driver
  • Direct Opto-Coupler Interface
  • Maximum Duty Cycle Limiting (80% for LM5021-1
    or 50% for LM5021-2)
  • Slope Compensation (LM5021-1 Only)
  • Under Voltage Lockout (UVLO) with Hysteresis
  • Cycle-by-Cycle Over-Current Protection
  • Hiccup Mode for Continuous Overload Protection
  • Leading Edge Blanking of Current Sense Signal
  • Packages: VSSOP-8 or PDIP-8

The LM5021 off-line pulse width modulation (PWM) controller contains all of the features needed to implement highly efficient off-line single-ended flyback and forward power converters using current-mode control. The LM5021 features include an ultra-low (25 µA) start-up current, which minimizes power losses in the high voltage start-up network. A skip cycle mode reduces power consumption with light loads for energy conserving applications (ENERGY STAR®, CECP, and so forth). Additional features include under-voltage lockout, cycle-by-cycle current limit, hiccup mode overload protection, slope compensation, soft-start and oscillator synchronization capability. This high performance 8-pin IC has total propagation delays less than 100 ns and a 1-MHz capable oscillator that is programmed with a single resistor.

The LM5021 off-line pulse width modulation (PWM) controller contains all of the features needed to implement highly efficient off-line single-ended flyback and forward power converters using current-mode control. The LM5021 features include an ultra-low (25 µA) start-up current, which minimizes power losses in the high voltage start-up network. A skip cycle mode reduces power consumption with light loads for energy conserving applications (ENERGY STAR®, CECP, and so forth). Additional features include under-voltage lockout, cycle-by-cycle current limit, hiccup mode overload protection, slope compensation, soft-start and oscillator synchronization capability. This high performance 8-pin IC has total propagation delays less than 100 ns and a 1-MHz capable oscillator that is programmed with a single resistor.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
LM5021-Q1 現行 車用 30V、1MHz 電流模式 PWM 控制器 Automotive qualified version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 6
類型 標題 日期
* Data sheet LM5021 AC-DC Current-Mode PWM Controller datasheet (Rev. E) PDF | HTML 2014年 12月 24日
Functional safety information LM5021 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 2022年 9月 12日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Technical article Power Tips: Design considerations of high-voltage converters in a cascode MOSFET PDF | HTML 2015年 11月 3日
Application note AN-2102 LM3464 and LM5021 DHC 25W Reference Designs (Rev. A) 2013年 5月 1日
User guide Load Detecting Power Supply User Guide 2012年 1月 27日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

LM5021 Unencrypted PSpice Transient Model

SNVM012.ZIP (623 KB) - PSpice Model
模擬型號

LM5021-1 TINA-TI Transient Reference Design

SNVM454.TSC (552 KB) - TINA-TI Reference Design
模擬型號

LM5021-1 TINA-TI Transient Spice Model

SNVM455.ZIP (19 KB) - TINA-TI Spice Model
模擬型號

LM5021-2 TINA-TI Transient Reference Design

SNVM453.TSC (552 KB) - TINA-TI Reference Design
模擬型號

LM5021-2 TINA-TI Transient Spice Model

SNVM452.ZIP (18 KB) - TINA-TI Spice Model
CAD/CAE 符號

Load Detecting Power Supply CAD Files

SNVC021.ZIP (458 KB)

許多 TI 參考設計包含 LM5021

使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。

封裝 針腳 CAD 符號、佔位空間與 3D 模型
PDIP (P) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片