首頁 電源管理 DC/DC 電源模組 電源模組 (整合式電感器)
首頁
電源管理
DC/DC 電源模組
電源模組 (整合式電感器)

LMZ12010

現行

具 20V 最大輸入電壓的 10A SIMPLE SWITCHER® 電源模組

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
此產品將繼續向現有客戶提供。新設計應考量替代產品。
功能與所比較的裝置相似
TPSM5D1806 現行 4.5-V 至 15-V 輸入、雙路 6-A、單路 12-A 輸出電源模組 Higher current converter with remote sense in a smaller package.

LMZ12010

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck, Synchronous Buck Type Module Iout (max) (A) 10 Vin (min) (V) 6 Vin (max) (V) 20 Vout (min) (V) 0.8 Vout (max) (V) 6 Switching frequency (min) (kHz) 314 Switching frequency (max) (kHz) 404 Features EMI Tested, Enable, Tracking Control mode current mode Duty cycle (max) (%) 85
Rating Catalog Operating temperature range (°C) -40 to 85 Topology Buck, Synchronous Buck Type Module Iout (max) (A) 10 Vin (min) (V) 6 Vin (max) (V) 20 Vout (min) (V) 0.8 Vout (max) (V) 6 Switching frequency (min) (kHz) 314 Switching frequency (max) (kHz) 404 Features EMI Tested, Enable, Tracking Control mode current mode Duty cycle (max) (%) 85
TO-PMOD (NDY) 11 266.85 mm² 15 x 17.79
  • Integrated shielded inductor
  • Simple PCB layout
  • Fixed switching frequency (350 kHz)
  • Flexible start-up sequencing using external soft start, tracking, and precision enable
  • Protection against inrush currents and faults such as input UVLO and output short circuit
  • Junction temperature range: –40°C to 125°C
  • Single exposed pad and standard pinout for easy mounting and manufacturing
  • Fully enabled for WEBENCH power designer
  • Pin compatible with LMZ22010, LMZ22008, LMZ22006, LMZ12008, LMZ12006, LMZ23610, LMZ23608, LMZ23606, LMZ13610, LMZ13608, and LMZ13606
  • Electrical specifications
    • 50-W maximum total output power
    • Up to 10-A output current
    • Input voltage range: 6 V to 20 V
    • Output voltage range: 0.8 V to 6 V
    • Efficiency up to 92%
  • Performance benefits
    • High efficiency reduces system heat generation
    • Low radiated emissions (EMI) tested to EN55022 (1)
    • Only seven external components
    • Low output voltage ripple
    • No external heat sink required

(1)EN 55022:2006, +A1:2007, FCC Part 15 Subpart B, tested on Evaluation Board with EMI configuration.
  • Integrated shielded inductor
  • Simple PCB layout
  • Fixed switching frequency (350 kHz)
  • Flexible start-up sequencing using external soft start, tracking, and precision enable
  • Protection against inrush currents and faults such as input UVLO and output short circuit
  • Junction temperature range: –40°C to 125°C
  • Single exposed pad and standard pinout for easy mounting and manufacturing
  • Fully enabled for WEBENCH power designer
  • Pin compatible with LMZ22010, LMZ22008, LMZ22006, LMZ12008, LMZ12006, LMZ23610, LMZ23608, LMZ23606, LMZ13610, LMZ13608, and LMZ13606
  • Electrical specifications
    • 50-W maximum total output power
    • Up to 10-A output current
    • Input voltage range: 6 V to 20 V
    • Output voltage range: 0.8 V to 6 V
    • Efficiency up to 92%
  • Performance benefits
    • High efficiency reduces system heat generation
    • Low radiated emissions (EMI) tested to EN55022 (1)
    • Only seven external components
    • Low output voltage ripple
    • No external heat sink required

(1)EN 55022:2006, +A1:2007, FCC Part 15 Subpart B, tested on Evaluation Board with EMI configuration.

The LMZ12010 SIMPLE SWITCHER power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ12010 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12010 device can accept an input voltage rail between 6 V and 20 V and deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ12010 only requires two external resistors and external capacitors to complete the power solution. The LMZ12010 is a reliable and robust design with the following protection features: thermal shutdown, programmable input undervoltage lockout, output overvoltage protection, short circuit protection, output current limit, and the device allows start-up into a prebiased output.

The LMZ12010 SIMPLE SWITCHER power module is an easy-to-use step-down DC-DC solution capable of driving up to 10-A load. The LMZ12010 is available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12010 device can accept an input voltage rail between 6 V and 20 V and deliver an adjustable and highly accurate output voltage as low as 0.8 V. The LMZ12010 only requires two external resistors and external capacitors to complete the power solution. The LMZ12010 is a reliable and robust design with the following protection features: thermal shutdown, programmable input undervoltage lockout, output overvoltage protection, short circuit protection, output current limit, and the device allows start-up into a prebiased output.
filter 尋找其它 電源模組 (整合式電感器)
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 13
類型 標題 日期
* Data sheet LMZ12010 10-A SIMPLE SWITCHER® Power Module With 20-V Maximum Input Voltage datasheet (Rev. I) PDF | HTML 2022年 3月 30日
Selection guide Power Management Guide 2018 (Rev. R) 2018年 6月 25日
Application note Design Summary LMZ1xxx and LMZ2xxx Power Module Family (Rev. B) 2016年 1月 20日
Application note AN-2027 Inverting Application for the LMZ14203 SIMPLE SWITCHER Power Module (Rev. A) 2013年 5月 6日
User guide AN-2134 LMZ13610/8/6 and LMZ12010/8/6 Evaluation Board (Rev. C) 2013年 4月 24日
EVM User's guide AN-2136 LMZ13610/8/6 and LMZ12010/8/6 Demo Board (Rev. B) 2013年 4月 24日
Application note AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013年 4月 23日
Application note AN-2026 Effect of PCB Design on Thermal Performance of SIMPLE SWITCHER Modules (Rev. A) 2013年 4月 23日
Application note AN-2052 Texas Instruments SIMPLE SWITCHER Power Modules and EMI (Rev. C) 2013年 4月 23日
Application note AN-2078 PCB Layout for Texas Instruments SIMPLE SWITCHER Power Modules (Rev. A) 2013年 4月 23日
Design guide LMZ12010 20VIN 10AOUT Simple Switcher® Module Reference Design 2012年 1月 27日
Application note Understanding and Applying Current-Mode Control Theory 2007年 8月 19日
More literature SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005年 7月 12日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMZ12010DEMO — 20 伏特 Simple Switcher® 模組 10A 展示板

The LMZ12010 SIMPLE SWITCHER® power module is an easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ12010 can accept an input voltage rail between 6V and 20V. (...)

使用指南: PDF
TI.com 無法提供
開發板

LMZ12010EVAL — 20 伏特 Simple Switcher® 模組 10A 評估板

The LMZ13610/8 and LMZ12010/8 SIMPLE SWITCHER® power modules are easy-to-use DC-DC solution capable of driving up to a 10A load. They are available in an innovative package that enhances thermal performance and allows for hand or machine soldering.

The LMZ13610/8 can accept an input voltage rail (...)

使用指南: PDF
TI.com 無法提供
模擬型號

LMZ12010 PSpice Average Model

SNVM198.ZIP (50 KB) - PSpice Model
下載
模擬型號

LMZ12010 PSpice Transient Model

SNVM199.ZIP (158 KB) - PSpice Model
下載
模擬型號

LMZ12010 Unencrypted PSpice Average Model

SNVM756.ZIP (1 KB) - PSpice Model
下載
模擬型號

LMZ12010 Unencrypted PSpice Transient Model

SNVM757.ZIP (2 KB) - PSpice Model
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TO-PMOD (NDY) 11 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片