LP2985-N
- V IN range: 2.5 V to 16 V
- V OUT range (new chip):
- 1.2 V to 5.0 V (fixed, 100-mV steps)
- V OUT range (legacy chip): 2.5 V to 6.1 V
- V OUT accuracy:
- ±1% for A-grade legacy chip
- ±1.5% for standard-grade legacy chip
- ±0.5% for new chip only
- Output accuracy over load, and temperature:
- ±1% for new chip
- Output current: Up to 150 mA
- Low I Q (new chip): 71 µA at I LOAD = 0 mA
- Low I Q (new chip): 750 µA at I LOAD = 150 mA
- Shutdown current:
- 0.05 µA (typ) for legacy chip
- 1.12 µA (typ) for new chip
- Low noise: 30 µV RMS with 10-nF bypass capacitor
- Output current limiting and thermal protection
- Stable with 2.2-µF ceramic capacitors
- High PSRR: 70 dB at 1 kHz, 40 dB at 1 MHz
- Operating junction temperature: –40°C to +125°C
- Package: 5-pin SOT-23 (DBV) ultra-low dropout voltage
The LP2985-N is a fixed-output, wide-input, low-noise, low-dropout voltage regulator supporting an input voltage range from 2.5 V to 16 V and up to 150 mA of load current. The LP2985-N supports an output range of 1.2 V to 5.0 V (new chip) and 2.5 V to 6.1 V (legacy chip).
Additionally, the LP2985-N (new chip) has a 1% output accuracy across load and temperature that can meet the needs of low-voltage microcontrollers (MCUs) and processors.
Low output noise of 30 µV RMS (with 10-nF bypass capacitors) and wide bandwidth PSRR performance of greater than 70 dB at 1 kHz and 40 dB at 1 MHz help attenuate the switching frequency of an upstream DC/DC converter and minimize post regulator filtering.
The internal soft-start time and current-limit protection reduce inrush current during start up, thus minimizing input capacitance. Standard protection features, such as overcurrent and overtemperature protection, are included.
The LP2985-N is available in a 5-pin, 2.9-mm × 1.6-mm SOT-23 (DBV) package.
您可能會感興趣的類似產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | LP2985-N 150-mA, Low-Noise, Low-Power, Ultra-Low-Dropout Regulator in a SOT-23 Package datasheet (Rev. AA) | PDF | HTML | 2023年 7月 14日 |
Application note | A Topical Index of TI LDO Application Notes (Rev. F) | 2019年 6月 27日 | ||
Technical article | Trends in building automation: connected sensors for user comfort | PDF | HTML | 2016年 9月 2日 | |
Application note | AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) | 2013年 5月 6日 | ||
User guide | AN-1840 USB I 2 C Interface Board Reference Manual (Rev. A) | 2013年 4月 30日 | ||
Application note | AN-1172 LP2980, LP2981, LP2982, LP2985 Micro SMD Demo Boards (Rev. B) | 2013年 4月 25日 | ||
White paper | Engineers note: Capacitors are key to voltage regulator design | 2002年 7月 1日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
FDC1004QEVM — 汽車 4 通道電容轉數位轉換器評估模組
The FDC1004Q evaluation module is used to evaluate the FDC1004-Q1, automotive 4-channel capacitive-to-digital converter. The evaluation modules features a breakable PCB composed of three sections: a USB to I²C converter based on the MSP430F5528 microcontroller, the FDC1004-Q1, and two sensor (...)
TIDA-00300 — 適用於通訊和類比輸入/輸出模組的隔離式電源架構參考設計
TIDA-00508 — 使用 LDC1314 電感轉數位轉換器的 1 度旋鈕參考設計
This reference design uses the LDC1314. (...)
TIDA-00440 — 用於判斷絕緣電阻的漏電流量測參考設計
TIDA-00509 — 使用 LDC1314 電感轉數位轉換器的 16 按鈕電感式鍵盤參考設計
This reference design uses the LDC1314. This reference design can also be (...)
TIDA-01070 — 適用於空氣過濾器更換中的預測性維護的 HVAC 線圈氣流傳感器參考設計
TIDA-01465 — 解析度小於 1mm、溫度漂移小於 0.25% 的電容式冰霜偵測參考設計
PMP20587 — 反向降壓升壓參考設計
TIDA-01102 — 適用於防水/雜訊抗擾 HMI 應用的電感式觸控不鏽鋼鍵盤參考設計
TIDA-00590 — 雙電池充電器 IC 參考設計尺寸 (以 Cascode 配置連接)
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOT-23 (DBV) | 5 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。