LP2987

現行

具電源良好和啟用功能的 200-mA、16-V、低壓差電壓穩壓器

立即訂購

產品規格表

document-pdfAcrobat LP2987/88 Micropwr, 200mA Ultra Low-Drpout Vreg w/Prog Pwr-On Rst Delay Low-N datasheet (Rev. J) (英文)

現在提供此產品的更新版本

open-in-new

比較替代產品

功能相同，但引腳輸出與所比較的裝置不同

TPS7A24

現行

具啟用功能的 200mA、18V、超低 IQ 低壓差 (LDO) 電壓穩壓器 Better PSRR

TPS7A25

現行

具有電源良好功能的 300mA、18V、超低 IQ、高準確度、可調整低壓差電壓穩壓器 Alternative product offering lower-IQ and higher accuracy in a 2x2 WSON package

LP2987

現行

產品規格表

立即訂購

產品詳細資料

Output options

Fixed Output

Iout (max) (A)

0.2

Vin (max) (V)

16

Vin (min) (V)

2.1

Vout (max) (V)

5

Vout (min) (V)

3

Fixed output options (V)

3, 3.3, 5

Rating

Catalog

Noise (µVrms)

100

PSRR at 100 KHz (dB)

42

Iq (typ) (mA)

0.1

Thermal resistance θJA (°C/W)

160

Load capacitance (min) (µF)

4.7

Regulated outputs (#)

1

Features

Enable, Power good

Accuracy (%)

2

Dropout voltage (Vdo) (typ) (mV)

180

Operating temperature range (°C)

-40 to 125

Output options

Fixed Output

Iout (max) (A)

0.2

Vin (max) (V)

16

Vin (min) (V)

2.1

Vout (max) (V)

5

Vout (min) (V)

3

Fixed output options (V)

3, 3.3, 5

Rating

Catalog

Noise (µVrms)

100

PSRR at 100 KHz (dB)

42

Iq (typ) (mA)

0.1

Thermal resistance θJA (°C/W)

160

Load capacitance (min) (µF)

4.7

Regulated outputs (#)

1

Features

Enable, Power good

Accuracy (%)

2

Dropout voltage (Vdo) (typ) (mV)

180

Operating temperature range (°C)

-40 to 125

SOIC (D)

8

29.4 mm² 4.9 x 6

VSSOP (DGK)

8

14.7 mm² 3 x 4.9

WSON (NGN)

8

16 mm² 4 x 4

Ultra Low Dropout Voltage
Power-ON Reset Delay Requires Only One Component
Bypass Pin for Reduced Output Noise (LP2988)
Specified Continuous Output Current 200 mA
Specified Peak Output Current > 250 mA
SOIC-8 and VSSOP-8 Surface Mount Packages
<2 μA Quiescent Current when Shutdown
Low Ground Pin Current at All Loads
0.5% Output Voltage Accuracy (“A” Grade)
Wide Supply Voltage Range (16V Max)
Overtemperature/overcurrent Protection
−40°C to +125°C Junction Temperature Range

All trademarks are the property of their respective owners.

Ultra Low Dropout Voltage
Power-ON Reset Delay Requires Only One Component
Bypass Pin for Reduced Output Noise (LP2988)
Specified Continuous Output Current 200 mA
Specified Peak Output Current > 250 mA
SOIC-8 and VSSOP-8 Surface Mount Packages
<2 μA Quiescent Current when Shutdown
Low Ground Pin Current at All Loads
0.5% Output Voltage Accuracy (“A” Grade)
Wide Supply Voltage Range (16V Max)
Overtemperature/overcurrent Protection
−40°C to +125°C Junction Temperature Range

All trademarks are the property of their respective owners.

The LP2987/8 are fixed-output 200 mA precision LDO voltage regulators with power-ON reset delay which can be implemented using a single external capacitor.

The LP2988 is specifically designed for noise-critical applications. A single external capacitor connected to the Bypass pin reduces regulator output noise.

Using an optimized VIP (Vertically Integrated PNP) process, these regulators deliver superior performance:

Dropout Voltage: 180 mV @ 200 mA load, and 1 mV @ 1 mA load (typical).

Ground Pin Current: 1 mA @ 200 mA load, and 200 μA @ 10 mA load (typical).

Sleep Mode: The LP2987/8 draws less than 2 μA quiescent current when shutdown pin is held low.

Error Flag/Reset: The error flag goes low when the output drops approximately 5% below nominal. This pin also provides a power-ON reset signal if a capacitor is connected to the DELAY pin.

Precision Output: Standard product versions of the LP2987 and LP2988 are available with output voltages of 5.0V, 3.8V, 3.3V, 3.2V, 3.0V, or 2.8V, with specified accuracy of 0.5% (“A” grade) and 1% (standard grade) at room temperature.