首頁 馬達驅動器 無刷 DC (BLDC) 馬達驅動器 整合式控制 BLDC 驅動器
首頁
馬達驅動器
無刷 DC (BLDC) 馬達驅動器
整合式控制 BLDC 驅動器
最新

MCF8316D

現行

最大 40V、8A 峰值、無感測器 FOC，選用的 UL 認可 3 相 BLDC 馬達驅動器

立即訂購
產品規格表

MCF8316D

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² 7 x 5
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Speed, current, power, and voltage control modes
    • Forward and reverse windmilling support
    • Configurable power and speed limit
    • Lead angle adjustment for high efficiency
    • Improved acoustic performance with soft-start, soft-stop and dead time compensation
    • Offline motor parameter measurement with Motor Parameter Extraction Tool (MPET)
    • Analog, PWM, frequency, or I2C based speed input
    • Configurable motor start-up and stop options
    • Flux weakening for high-speed operation
    • Anti-voltage surge (AVS) protection
    • Variable monitoring through DACOUT pins
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • RDS(ON) (HS + LS) at TA = 25°C : 95mΩ (typ.)
  • Low power sleep mode: Refer
    • 5µA (maximum) at VVM = 24V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Configurable EEPROM with R/W security to store device configuration
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3V, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum, PWM dithering, and slew rate for EMI reduction
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection
    • Configurable current limit
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Speed, current, power, and voltage control modes
    • Forward and reverse windmilling support
    • Configurable power and speed limit
    • Lead angle adjustment for high efficiency
    • Improved acoustic performance with soft-start, soft-stop and dead time compensation
    • Offline motor parameter measurement with Motor Parameter Extraction Tool (MPET)
    • Analog, PWM, frequency, or I2C based speed input
    • Configurable motor start-up and stop options
    • Flux weakening for high-speed operation
    • Anti-voltage surge (AVS) protection
    • Variable monitoring through DACOUT pins
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • RDS(ON) (HS + LS) at TA = 25°C : 95mΩ (typ.)
  • Low power sleep mode: Refer
    • 5µA (maximum) at VVM = 24V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Configurable EEPROM with R/W security to store device configuration
  • Does not require external current sense resistors; uses built-in current sensing
  • Built-in 3.3V, 20mA LDO regulator
  • Built-in 3.3V/5V, 170mA buck regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum, PWM dithering, and slew rate for EMI reduction
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection
    • Configurable current limit
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCF8316D provides a single-chip, code-free sensorless FOC device for customers driving speed-controlled 12 to 24V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 8A peak current. The MCF8316D integrates three ½-bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (high-side + low-side FETs). MCF8316D integrates power management circuits including a voltage-adjustable buck regulator (3.3V/5V, 170mA) and LDO (3.3V, 20mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8316D, intended to protect the device, motor, and system against fault events.

Documentation for reference:

The MCF8316D provides a single-chip, code-free sensorless FOC device for customers driving speed-controlled 12 to 24V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 8A peak current. The MCF8316D integrates three ½-bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (high-side + low-side FETs). MCF8316D integrates power management circuits including a voltage-adjustable buck regulator (3.3V/5V, 170mA) and LDO (3.3V, 20mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8316D, intended to protect the device, motor, and system against fault events.

Documentation for reference:

filter 尋找其它 整合式控制 BLDC 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
類型 標題 日期
* Data sheet MCF8316D Sensorless Field Oriented Control (FOC) Integrated FET BLDC Driver datasheet PDF | HTML 2024年 12月 17日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MCF8316AEVM — MCF8316A 三相無感測器 FOC BLDC 馬達驅動器評估模組

MCF8316A 為三個半全橋整合式 MOSFET 驅動器，適用 4.5-V 至 35-V、8-A 尖峰電流驅動之三相無刷 DC (BLDC) 馬達的無感測器 FOC 控制。MCx8316A 整合降壓穩壓器，可透過可編程穩壓電源支援 200-mA。包括板載 MSP430、MSP430FR2355，可用做與 MCF8316AEVM GUI 的介面。
使用指南: PDF | HTML
Download English Version: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

MOTORSTUDIO — Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio is an easy-to-use graphical user interface (GUI) that simplifies the tuning process of our brushless DC (BLDC) motor drivers to reduce device evaluation and product development time. The GUI allows users to quickly spin up their motors and optimize various stages of motor operation to (...)

支援產品和硬體

支援產品和硬體

產品
整合式控制 BLDC 驅動器
MCF8315A — 40-V 最大值、4-A 峰值無感測器 FOC 控制三相 BLDC 馬達驅動器 MCF8315C — 最大 40V、4A 峰值、無感測器磁場定向控制 (FOC) 三相 BLDC 馬達驅動器 MCF8315C-Q1 — 車用、最大 40V、4A 峰值、無感測器磁場定向控制 (FOC) 三相 BLDC 馬達驅動器 MCF8315D — 最大 40V、4A 峰值、無感測器 FOC，選用的 UL 認可 3 相 BLDC 馬達驅動器 MCF8316A — 40-V 最大值、8-A 峰值無感測器 FOC 控制 3 相 BLDC 馬達驅動器 MCF8316C-Q1 — 車用、40-V 最大值、8-A 峰值、無感測器磁場定向控制 (FOC) 3 相 BLDC 馬達驅動器 MCF8316D — 最大 40V、8A 峰值、無感測器 FOC，選用的 UL 認可 3 相 BLDC 馬達驅動器 MCF8329A — 60V 無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器
硬體開發
開發板
MCF8315EVM — 適用三相無感測器 FOC 整合式 MOSFET BLDC 馬達驅動器的 MCF8315 評估模組 MCF8315PWPEVM — 適用於 24 針腳 HTSSOP 的 MCF8315C 評估模組 MCF8316AEVM — MCF8316A 三相無感測器 FOC BLDC 馬達驅動器評估模組 MCF8329EVM — 適用於 60V 無感測器 FOC 三相 BLDC 閘極驅動器的 MCF8329 評估模組 MCF8329RRYEVM — MCF8329 evaluation module for 32-pin VQFN package
下載選項
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGF) 40 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片