SN65175

現行

四路差分線路接收器

立即訂購

產品規格表

document-pdfAcrobat SNx5175 Quadruple Differential Line Receivers datasheet (Rev. D) (英文) PDF | HTML

SN65175

現行

產品規格表

立即訂購

產品詳細資料

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

40

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Number of receivers

4

Number of transmitters

0

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

40

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 12

Number of nodes

32

Isolated

No

Supply current (max) (µA)

70000

Rating

Catalog

Operating temperature range (°C)

-40 to 85

SOIC (D)

16

59.4 mm² 9.9 x 6

Meet or exceed the requirements of ANSI standard EIA/TIA-422-B, RS-423-B, and RS-485
Meet ITU recommendations V.10, V.11, X.26, and X.27
Designed for multipoint bus transmission on long bus lines in noisy environments
3-state outputs
Common-mode input voltage range: −12 V to 12 V
Input sensitivity: ±200 mV
Input hysteresis: 50-mV typical
High input impedance: 12-kΩ minimum
Operate from single 5-V supply
Low-power requirements
Plug-in replacement for MC3486

Meet or exceed the requirements of ANSI standard EIA/TIA-422-B, RS-423-B, and RS-485
Meet ITU recommendations V.10, V.11, X.26, and X.27
Designed for multipoint bus transmission on long bus lines in noisy environments
3-state outputs
Common-mode input voltage range: −12 V to 12 V
Input sensitivity: ±200 mV
Input hysteresis: 50-mV typical
High input impedance: 12-kΩ minimum
Operate from single 5-V supply
Low-power requirements
Plug-in replacement for MC3486

The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. Each of the two pairs of receivers has a common active-high enable.

The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

The SN65175 is characterized for operation from −40°C to 85°C. The SN75175 is characterized for operation from 0°C to 70°C.

The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. Each of the two pairs of receivers has a common active-high enable.

The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

The SN65175 is characterized for operation from −40°C to 85°C. The SN75175 is characterized for operation from 0°C to 70°C.

filter

尋找其它 RS-485 & RS-422 收發器

下載