SN65DSI86-Q1
- Embedded DisplayPort (eDP) 1.4 Compliant
Supporting 1, 2, or 4 Lanes at 1.62 Gbps (RBR),
2.16 Gbps, 2.43 Gbps, 2.7 Gbps (HBR), 3.24
Gbps, 4.32 Gbps, or 5.4 Gbps (HBR2). - Implements MIPI® D-PHY Version 1.1 Physical
Layer Front-End and Display Serial Interface (DSI)
Version 1.02.00 - Dual-Channel DSI Receiver Configurable for One,
Two, Three, or Four D-PHY Data Lanes Per
Channel Operating up to 1.5 Gbps Per Lane - Supports 18 bpp and 24 bpp DSI Video Packets
With RGB666 and RGB888 Formats - Suitable for 60 fps 4K 4096 × 2304 Resolution at
18 bpp Color, and WUXGA 1920 × 1200
Resolution with 3D Graphics at 60 fps (120 fps
Equivalent) - MIPI Front-End Configurable for Single-Channel
or Dual-Channel DSI Configuration - Supports Dual-Channel DSI Odd, Even and Left,
Right Operating Modes - 1.2-V Main VCC Power Supply and 1.8-V Supply
for Digital I/Os - Low-Power Features Include Panel Refresh and
MIPI Ultralow Power State (ULPS) Support - DisplayPort Lane Polarity and Assignment
Configurable. - Supports 12-MHz, 19.2-MHz, 26-MHz, 27-MHz,
and 38.4-MHz Frequencies Through External
Reference Clock (REFCLK) - ESD Rating ±2 kV (HBM)
- Packaged in 64-Terminal HTQFP (PAP)
- Temperature Range: –40°C to +85°C
The SN65DSI86-Q1 DSI to embedded DisplayPort (eDP) bridge features a dual-channel MIPI D-PHY receiver front-end configuration with four lanes per channel operating at 1.5 Gbps per lane and a maximum input bandwidth of 12 Gbps. The bridge decodes MIPI DSI 18-bpp RGB666 and 24-bpp RGB888 packets and converts the formatted video data stream to a DisplayPort with up to four lanes at either 1.62 Gbps, 2.16 Gbps, 2.43 Gbps, 2.7 Gbps, 3.24 Gbps, 4.32 Gbps, or 5.4 Gbps.
The SN65DSI86-Q1 is well suited for WQXGA at 60 frames per second, as well as 3D graphics at 4K and true HD (1920 × 1080) resolutions at an equivalent 120 fps with up to 24 bpp. Partial line buffering is implemented to accommodate the data stream mismatch between the DSI and DisplayPort interfaces.
Designed with industry compliant interface technology, the is compatible with a wide range of microprocessors, and is designed with a range of power management features, including panel refresh support, and the MIPI defined ultralow power state (ULPS) support.
The SN65DSI86 Q1 is implemented in a 10-mm × 10-mm HTQFP at 0.5-mm pitch package, and operates across a temperature range from –40°C to +85°C.
In the rest of this document, the SN65DSI86-Q1 is referred to as SN65DSIx6 or DSIx6.
技術文件
| 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | SN65DSIx6-Q1 MIPI® DSI to eDP™ Bridge datasheet (Rev. A) | PDF | HTML | 2015年 12月 29日 |
| Application note | SN65DSI86 and SN65DSI96 Hardware Implementation Guide | 2013年 10月 8日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
DSI-TUNER — 調諧器視訊配置軟體工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTQFP (PAP) | 64 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。