SN65HVD72
- Small-size VSSOP Packages Save Board Space, or SOIC for Drop-in Compatibility
- Bus I/O Protection
- >±15 kV HBM Protection
- >±12 kV IEC 61000-4-2 Contact Discharge
- >±4 kV IEC 61000-4-4 Fast Transient Burst
- Extended Industrial Temperature Range
–40°C to 125°C - Large Receiver Hysteresis (80 mV) for Noise Rejection
- Low Unit-Loading Allows Over 200 Connected Nodes
- Low Power Consumption
- Low Standby Supply Current: < 2 µA
- ICC < 1 mA Quiescent During Operation
- 5-V Tolerant Logic Inputs Compatible With
3.3-V or 5-V Controllers - Signaling Rate Options Optimized for:
250 kbps, 20 Mbps, 50 Mbps - Glitch Free Power-Up and Power-Down Bus Inputs and Outputs
These devices have robust 3.3-V drivers and receivers in a small package for demanding industrial applications. The bus pins are robust to ESD events with high levels of protection to Human-Body Model and IEC Contact Discharge specifications.
Each of these devices combines a differential driver and a differential receiver which operate from a single 3.3-V power supply. The driver differential outputs and the receiver differential inputs are connected internally to form a bus port suitable for half-duplex (two-wire bus) communication. These devices feature a wide common-mode voltage range making the devices suitable for multi-point applications over long cable runs. These devices are characterized from –40°C to 125°C.
您可能會感興趣的類似產品
引腳對引腳且具備與所比較裝置相同的功能
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | SN65HVD7x 3.3-V Supply RS-485 With IEC ESD protection datasheet (Rev. H) | PDF | HTML | 2019年 3月 11日 |
EVM User's guide | RS-485 Half-Duplex EVM User's Guide (Rev. C) | PDF | HTML | 2021年 9月 1日 | |
Technical article | Get Connected: How to operate your RS-485 links without termination | PDF | HTML | 2016年 5月 19日 | |
Technical article | RS-485 basics: the RS-485 receiver | PDF | HTML | 2016年 2月 9日 | |
Technical article | RS-485 basics: The RS-485 Driver | PDF | HTML | 2015年 6月 16日 | |
Analog Design Journal | 2Q 2013 Issue Analog Applications Journal | 2013年 4月 16日 | ||
Analog Design Journal | RS-485 failsafe biasing: Old versus new transceivers | 2013年 4月 16日 | ||
EVM User's guide | SN65HVD7x EVM User's Guide | 2012年 3月 9日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
RS485-FL-DPLX-EVM — RS-485 全雙工評估模組
The RS-485 full-duplex evaluation module (EVM) helps designers evaluate device performance, supporting fast development and analysis of data transmission systems using any of the SN65HVD147x, SN65HVD179x, SN65HVD3x, SN65HVD5x and SN65HVD7x full-duplex transceivers in a 14-pin D package. The (...)
RS485-HF-DPLX-EVM — RS-485 半雙工評估模組
SN65HVD72EVM — SN65HVD72EVM 評估模組
The SN65HVD72EVM evaluation module (EVM) helps you evaluate device performance, supporting fast development and analysis of data transmission systems using the SN65HVD72, SN65HVD75 and SN65HVD78 transceivers. The EVM board comes with the SN65HVD75 (20 Mbps) device soldered to the board. (...)
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
TIDA-00485 — 具有 24 VAC 電源的非隔離式 RS-485 轉 Wi-Fi 橋接器參考設計
TIDA-00202 — HIPERFACE 位置編碼器介面參考設計
TIDA-00203 — 採用 32 位元 ARM Cortex-M4F MCU 的小型 CAN 到乙太網路轉換器參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOIC (D) | 8 | Ultra Librarian |
VSON (DRB) | 8 | Ultra Librarian |
VSSOP (DGK) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。