SN75159

現行

具有 3 態輸出的雙路差分線路驅動器

立即訂購

產品規格表

document-pdfAcrobat Dual Differential Line Driver With 3-State Outputs datasheet (Rev. B) (英文)

SN75159

現行

產品規格表

立即訂購

產品詳細資料

Number of receivers

0

Number of transmitters

2

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 7

Number of nodes

32

Isolated

No

Supply current (max) (µA)

65000

Rating

Catalog

Operating temperature range (°C)

0 to 70

Number of receivers

0

Number of transmitters

2

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

IEC 61000-4-2 contact (±V)

None

Fault protection (V)

-10 to 15

Common-mode range (V)

-7 to 7

Number of nodes

32

Isolated

No

Supply current (max) (µA)

65000

Rating

Catalog

Operating temperature range (°C)

0 to 70

PDIP (N)

14

181.42 mm² 19.3 x 9.4

SOIC (D)

14

51.9 mm² 8.65 x 6

Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V.11
Single 5-V Supply
Balanced Line Operation
TTL Compatible
High-Impedance Output State for Party-Line Applications
High-Current Active-Pullup Outputs
Short-Circuit Protection
Dual Channels
Clamp Diodes at Inputs

Meets or Exceeds the Requirements of ANSI EIA/TIA-422-B and ITU Recommendation V.11
Single 5-V Supply
Balanced Line Operation
TTL Compatible
High-Impedance Output State for Party-Line Applications
High-Current Active-Pullup Outputs
Short-Circuit Protection
Dual Channels
Clamp Diodes at Inputs

The SN75159 dual differential line driver with 3-state outputs is designed to provide all the features of the SN75158 line driver with the added feature of driver output controls. There is an individual control for each driver. When the output control is low, the associated outputs are in a high-impedance state and the outputs can neither drive nor load the bus. This permits many devices to be connected together on the same transmission line for party-line applications.

The SN75159 is characterized for operation from 0°C to 70°C.

The SN75159 dual differential line driver with 3-state outputs is designed to provide all the features of the SN75158 line driver with the added feature of driver output controls. There is an individual control for each driver. When the output control is low, the associated outputs are in a high-impedance state and the outputs can neither drive nor load the bus. This permits many devices to be connected together on the same transmission line for party-line applications.

The SN75159 is characterized for operation from 0°C to 70°C.

filter

尋找其它 RS-485 & RS-422 收發器

下載