SN75HVD06

Name: SN75HVD06
Brand: TI
SKU: SN75HVD06
Price: 1.888 USD

現行

高輸出 RS-485 收發器

立即訂購

產品規格表

document-pdfAcrobat SN65HVD0x, SN75HVD0x High Output RS-485 Transceivers datasheet (Rev. F) (英文) PDF | HTML

SN75HVD06

現行

產品規格表

立即訂購

產品詳細資料

Number of receivers

1

Number of transmitters

1

Duplex

Half

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

Fault protection (V)

-9 to 14

Common-mode range (V)

-7 to 12

Number of nodes

256

Isolated

No

Supply current (max) (µA)

15000

Rating

Catalog

Operating temperature range (°C)

0 to 70

Number of receivers

1

Number of transmitters

1

Duplex

Half

Supply voltage (nom) (V)

5

Signaling rate (max) (Mbps)

10

Fault protection (V)

-9 to 14

Common-mode range (V)

-7 to 12

Number of nodes

256

Isolated

No

Supply current (max) (µA)

15000

Rating

Catalog

Operating temperature range (°C)

0 to 70

SOIC (D)

8

29.4 mm² 4.9 x 6

Minimum differential output voltage of 2.5 V Into a 54-Ω load
Open-circuit, short-circuit, and idle-bus failsafe receiver
1/8^th Unit-load option available (Up to 256 nodes on the bus)
Bus-pin ESD protection exceeds 16 kV HBM
Driver output slew rate control options
Electrically compatible with ANSI TIA/EIA-485-A standard
Low-current standby mode: 1 µA typical
Glitch-free power-up and power-down protection for hot-plugging applications
Pin compatible with industry standard SN75176

Minimum differential output voltage of 2.5 V Into a 54-Ω load
Open-circuit, short-circuit, and idle-bus failsafe receiver
1/8^th Unit-load option available (Up to 256 nodes on the bus)
Bus-pin ESD protection exceeds 16 kV HBM
Driver output slew rate control options
Electrically compatible with ANSI TIA/EIA-485-A standard
Low-current standby mode: 1 µA typical
Glitch-free power-up and power-down protection for hot-plugging applications
Pin compatible with industry standard SN75176

The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control.

The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. These devices feature wide positive and negative common-mode voltage ranges, making them suitable for party-line applications.

The SN65HVD05, SN75HVD05, SN65HVD06, SN75HVD06, SN65HVD07, and SN75HVD07 combine a 3-state differential line driver and differential line receiver. They are designed for balanced data transmission and interoperate with ANSI TIA/EIA-485-A and ISO 8482E standard-compliant devices. The driver is designed to provide a differential output voltage greater than that required by these standards for increased noise margin. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as direction control.

The driver differential outputs and receiver differential inputs connect internally to form a differential input/ output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. These devices feature wide positive and negative common-mode voltage ranges, making them suitable for party-line applications.

filter

尋找其它 RS-485 & RS-422 收發器

下載