THVD1428
- Meets or exceeds the requirements of the TIA/EIA-485A standard
- 3-V to 5.5-V Supply voltage
- Bus I/O protection
- ± 16 kV HBM ESD
- ± 4 kV IEC 61000-4-2 Contact discharge
- ± 8 kV IEC 61000-4-2 Air-gap discharge
- ± 4 kV IEC 61000-4-4 Electrical fast transient
- ± 3 kV IEC 61000-4-5 1.2/50-µs Surge
- Supports 20 Mbps
- Extended ambient
temperature range: -40°C to 125°C - Extended operational
common-mode range: ± 12 V - Receiver hysteresis for noise rejection: 30 mV
- Low power consumption
- Standby supply current: < 2 µA
- Current during operation: < 3 mA
- Glitch-free power-up/down for hot plug-in capability
- Open, short, and idle bus fail-safe
- 1/8 Unit load (Up to 256 bus nodes)
- Industry standard 8-Pin SOIC
for drop-in compatibility
THVD1428 is a half-duplex RS-485 transceiver with integrated surge protection. Surge protection is achieved by integrating transient voltage suppressor (TVS) diodes in the standard 8-pin SOIC (D) package. This feature provides a substantial increase in reliability for better immunity to noise transients coupled to the data cable, eliminating the need for external protection components.
This device operates from a single 3.3-V or 5-V supply and features a wide common-mode voltage range which makes it suitable for multi-point applications over long cable runs.
The device is available in the industry standard SOIC package for easy drop-in without any PCB changes. The device is characterized over ambient free-air temperatures from –40°C to 125°C.

技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | THVD1428 3.3-V to 5-V RS-485 Transceiver with 3-kV Surge Protection datasheet | PDF | HTML | 2019年 12月 6日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
RS485-HF-DPLX-EVM — RS-485 半雙工評估模組
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前,建立完整的終端設備設計和解決方案原型,進而縮短上市時間並降低開發成本。
在 PSpice for TI 設計與模擬工具中,您可以搜尋 TI (...)
TINA-TI — 基於 SPICE 的類比模擬程式
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
SOIC (D) | 8 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。