TIOS1013
- Functional Safety-Capable
- 7-V to 36-V Supply Voltage
- PNP, NPN or Push-Pull Configurable Output
- Low Residual Voltage of 1.75 V at 250 mA
- 50-mA to 350-mA Configurable Current Limit
- Tolerant to ±65-V Transients < 100 µs
- Reverse Polarity Protection of up to 60 V on VCC, OUT and GND
- Integrated EMC Protection on VCC and OUT
- ±16 kV IEC 61000-4-2 ESD Contact Discharge
- ±4 kV IEC 61000-4-4 Electrical Fast Transient
- ±1.2 kV/500 Ω IEC 61000-4-5 Surge
- Fast Demagnetization of Inductive Loads up to 1.5 H
- Large Capacitive Load Driving Capability
- < 2.2-mA Quiescent Supply Current
- Integrated LDO Options for up to 20 mA Current
- TIOS101: No LDO
- TIOS1013: 3.3-V LDO
- TIOS1015: 5-V LDO
- Overtemperature Warning and Thermal Protection
- Fault Indicator
- Extended Ambient Temperature: -40°C to 125°C
- 2.5 mm x 3 mm 10-pin VSON Package
The TIOS101(x) devices are configurable as high-side, low-side or push-pull drivers. These devices are capable of withstanding up to 1.2 kV (500 Ω) of IEC 61000-4-5 surge and feature integrated reverse polarity protection.
A simple pin-programmable interface allows easy interfacing to the controller circuits. The output current limit can be configured using an external resistor.
Fault reporting and internal protection functions are provided for under voltage, over circuit current and over temperature.
技術文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5 | 類型 | 標題 | 日期 | ||
|---|---|---|---|---|
| * | Data sheet | TIOS101, TIOS101x Digital Sensor Output Drivers with Integrated Surge Protection datasheet (Rev. C) | PDF | HTML | 2021年 2月 16日 |
| White paper | Machine Learning Powers Autonomous Industrial Systems (Rev. A) | 2020年 6月 17日 | ||
| Functional safety information | TIOS101x Functional Safety FIT Rate, Failure Mode Distribution, and Pin FMA | 2020年 3月 17日 | ||
| White paper | Integrated digital output drivers simplify sensor designs | 2017年 9月 19日 | ||
| User guide | TIOL111-5 and TIOS101-5 Evaluation Modules | 2017年 7月 27日 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
開發板
TIOS1015EVM — TIOS1015 數位輸出 (SIO) 驅動器評估模組
The TIOS1015 EVM provides users with the ability to evaluate TI's TIOS101x family of Digital Output (SIO) drivers. The EVM includes the TIOS1015 which includes an on-chip 5-V LDO. With pin to pin compatibility throughout the TIOS101 family, the EVM can also support the TIOS101 (...)
使用指南: PDF
模擬工具
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
參考設計
TIDA-01599 — TÜV SÜD 評估工業驅動器的安全扭矩關閉 (STO) 參考設計 (IEC 61800-5-2)
本參考設計概述具有 CMOS 輸入隔離式 IGBT 閘極驅動器的三相逆變器的安全扭矩關閉 (STO) 子系統。STO 子系統採用雙通道架構 (1oo2)，硬體容錯範圍爲 1 (HFT=1)。實作時遵循去能脫扣概念。當雙 STO 輸入 (STO_1 和 STO_2) 變低電位作動時，六個隔離 IGBT 柵極驅動器的一次和二次側對應電源供電將透過負載開關切斷。如此可消除控制馬達並為馬達通電的可能性。STO 參考設計 (1oo2) 已由 TÜV SÜD 進行評估，一般適用於 SIL 3 和 PL e/Cat。3.
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| VSON (DMW) | 10 | Ultra Librarian |
訂購與品質
內含資訊：
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
內含資訊：
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。