TPD12S521
- IEC 61000-4-2 Level 4 ESD Protection
- ±8-kV Contact Discharge on External Lines
- Single-Chip ESD Solution for HDMI Driver
- On-Chip Current Regulator with 55-mA Current
Output - Supports All HDMI 1.3 and HDMI 1.4 Data Rates
(–3 dB Frequency > 3 GHz) - 0.8-pF Capacitance for the High Speed TMDS
Lines - 0.05-pF Matching Capacitance Between the
Differential Signal Pair - 38-Pin TSSOP Provides Seamless Layout Option
with HDMI Connector - Backdrive Protection
- TMDS_D[2:0]+/–
- TMDS_CK+/–
- CE_REMOTE_OUT
- DDC_DAT_OUT
- DDC_CLK_OUT
- HOTPLUG_DET_OUT
- Lead-Free Package
The TPD12S521 is a single-chip electro-static discharge (ESD) circuit protection device for the high-definition multimedia interface (HDMI) transmitter port. While providing ESD protection with transient voltage suppression (TVS) diodes, the TVS protection adds little or no additional glitch in the high-speed differential signals. The high-speed transition minimized differential signaling (TMDS) ESD protection lines add only 0.8-pF capacitance.
The low-speed control lines offer voltage-level shifting to eliminate the need for an external voltage level-shifter IC. The control line TVS diodes add 3.5-pF capacitance to the control lines. The 38-pin DBT package offers a seamless layout routing option to eliminate the routing glitch for the differential signal pairs. The DBT package pitch (0.5 mm) matches with the HDMI connector pitch. In addition, the pin mapping follows the same order as the HDMI connector pin mapping. The TPD12S521 provides an on-chip current limiting switch with output ratings of 55 mA at pin 38. This enables HDMI receiver detection even when the receiver device is powered off.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | TPD12S521 Single-Chip HDMI Transmitter Port Protection and Interface Device datasheet (Rev. F) | PDF | HTML | 2016年 2月 8日 |
User guide | Reading and Understanding an ESD Protection Data Sheet (Rev. A) | PDF | HTML | 2023年 9月 19日 | |
Selection guide | System-Level ESD Protection Guide (Rev. D) | 2022年 9月 7日 | ||
Application note | ESD Protection Layout Guide (Rev. A) | PDF | HTML | 2022年 4月 7日 | |
Selection guide | ESD by Interface Selection Guide (Rev. A) | 2017年 6月 26日 | ||
White paper | Designing USB for short-to-battery tolerance in automotive environments | 2016年 2月 10日 | ||
Analog Design Journal | Design Considerations for System-Level ESD Circuit Protection | 2012年 9月 25日 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具
TINA-TI — 基於 SPICE 的類比模擬程式
TIDEP-01008 — Jacinto™ ADAS 處理器上的多感測器平臺參考設計
封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
---|---|---|
TSSOP (DBT) | 38 | Ultra Librarian |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。