TPPM0302
- Automatic Input Voltage Source Selection
- Glitch-Free Regulated Output
- 5-V Input Voltage Source Detector With Hysteresis
- 400-mA Load Current Capability With 5-V or 3.3-V Input Source
- Power OK Feature Based on Voltage Supervisor of 3.3VOUT
- Low rDS(on) Auxiliary Switch
- Thermally Enhanced PowerPADTM Packaging Concept for Efficient Heat Management
PowerPAD is a trademark of Texas Instruments.
The TPPM0302 is a low-dropout regulator with auxiliary power management that provides a constant 3.3-V supply at the output capable of driving a 400-mA load.
The TPPM0302 provides a regulated power output for systems that have multiple input sources and require a constant voltage source with a low-dropout voltage. This is a single output, multiple input, intelligent power source selection device with a low-dropout regulator for either 5VCC or 5VAUX inputs, and a low-resistance bypass switch for the 3.3VAUX input.
Transitions may occur from one input supply to another without generating a glitch, outside of the specification range, on the 3.3-V output. The device has an incorporated reverse blocking scheme to prevent excess leakage from the input terminals in the event that the output voltage is greater than the input voltage. The output voltage is continually monitored for constant output, and any deviation from the internal set limit (2.8V) is reported by a low signal on the POK\ output.
The input voltage is prioritized in the following order: 5VCC, 5VAUX, and 3.3VAUX.
技術文件
類型 | 標題 | 日期 | ||
---|---|---|---|---|
* | Data sheet | 400-mA Low-Dropout Regulator with Auxiliary Power Management and POK datasheet | 2000年 11月 20日 |
訂購與品質
- RoHS
- REACH
- 產品標記
- 鉛塗層/球物料
- MSL 等級/回焊峰值
- MTBF/FIT 估算值
- 材料內容
- 認證摘要
- 進行中持續性的可靠性監測
- 晶圓廠位置
- 組裝地點