首頁 電源管理 監控器和重設 IC
首頁
電源管理
監控器和重設 IC

TPS3762-Q1

預覽

具超低靜態電流與內建自我測試的車用 65-V 窗型監控器

立即訂購
產品規格表

TPS3762-Q1

預覽
產品規格表 立即訂購

產品詳細資料

Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 0.8, Adjustable Features Detection time delay, Latch, Reset time delay, Self-Test, Separate VDD & sense, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 0.9 Iq (typ) (mA) 0.004 Output driver type/reset output Active-low, Open-drain Time delay (ms) 200 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 65 TI functional safety category Functional Safety-Compliant Rating Automotive Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 125
Number of supplies monitored 1 Threshold voltage 1 (typ) (V) 0.8, Adjustable Features Detection time delay, Latch, Reset time delay, Self-Test, Separate VDD & sense, Undervoltage and overvoltage monitor, Wide input voltage Reset threshold accuracy (%) 0.9 Iq (typ) (mA) 0.004 Output driver type/reset output Active-low, Open-drain Time delay (ms) 200 Supply voltage (min) (V) 2.7 Supply voltage (max) (V) 65 TI functional safety category Functional Safety-Compliant Rating Automotive Watchdog timer WDI (s) None Operating temperature range (°C) -40 to 125
SOT-23-THN (DDF) 8 8.12 mm² 2.9 x 2.8
  • ASIL-D Functional Safety-Compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL-D
    • Hardware capability up to ASIL-D
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C

  • Device flexibility to meet design requirements

    • Wide voltage threshold range: 2.7V to 60V
    • 800mV option - use with external resistor divider to set threshold
    • Built-in hysteresis (2%, 5%, and 10% options)
    • Fixed and programmable reset time delay
    • Fixed and programmable detection delay
  • Monitor high voltage power rails
    • Wide input voltage range: 2.7V to 65V
    • Reverse polarity protection on sense pin -65V

  • Fast UV/OV protection in 12/24/48V systems

    • Output reset latching feature
    • Ultra-fast detection time delay option(5µs)
    • Built-In Self-Test
  • ASIL-D Functional Safety-Compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL-D
    • Hardware capability up to ASIL-D
  • AEC-Q100 qualified for automotive applications
    • Device temperature grade 1: –40°C to +125°C

  • Device flexibility to meet design requirements

    • Wide voltage threshold range: 2.7V to 60V
    • 800mV option - use with external resistor divider to set threshold
    • Built-in hysteresis (2%, 5%, and 10% options)
    • Fixed and programmable reset time delay
    • Fixed and programmable detection delay
  • Monitor high voltage power rails
    • Wide input voltage range: 2.7V to 65V
    • Reverse polarity protection on sense pin -65V

  • Fast UV/OV protection in 12/24/48V systems

    • Output reset latching feature
    • Ultra-fast detection time delay option(5µs)
    • Built-In Self-Test

The TPS3762-Q1 is a 65V input voltage supervisor with 4µA IDD, 0.9% accuracy, fast detection time (5µs), and a Built-In Self-Test feature. This device can be connected directly to 12V / 24V automotive battery systems for continuous monitoring of overvoltage (OV) and undervoltage (UV) conditions; with the internal resistor divider, the TPS3762-Q1 offers the smallest total solution size. Wide hysteresis voltage options are available to ignore large voltage transients and prevent false reset signals.

The separate VDD and SENSE pins allow redundancy sought by high-reliability systems and SENSE can monitor higher and lower voltages than VDD. Optional use of external resistors are supported by the high impedance input of the SENSE pin. CTS and CTR pins allow delay adjustability on the falling and rising edges of the RESET signal. The CTS functions as a debouncer by ignoring voltage glitches on the monitored voltage rails.

The TPS3762-Q1 is available in a 2.9mm × 1.6mm SOT23 8-pin package.

The TPS3762-Q1 is a 65V input voltage supervisor with 4µA IDD, 0.9% accuracy, fast detection time (5µs), and a Built-In Self-Test feature. This device can be connected directly to 12V / 24V automotive battery systems for continuous monitoring of overvoltage (OV) and undervoltage (UV) conditions; with the internal resistor divider, the TPS3762-Q1 offers the smallest total solution size. Wide hysteresis voltage options are available to ignore large voltage transients and prevent false reset signals.

The separate VDD and SENSE pins allow redundancy sought by high-reliability systems and SENSE can monitor higher and lower voltages than VDD. Optional use of external resistors are supported by the high impedance input of the SENSE pin. CTS and CTR pins allow delay adjustability on the falling and rising edges of the RESET signal. The CTS functions as a debouncer by ignoring voltage glitches on the monitored voltage rails.

The TPS3762-Q1 is available in a 2.9mm × 1.6mm SOT23 8-pin package.
filter 尋找其它 監控器和重設 IC
下載 觀看有字幕稿的影片 影片
索取更多資訊

提供功能安全手冊和報告。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 3
類型 標題 日期
* Data sheet TPS3762-Q1 Automotive 65V Window (OV & UV) Supervisor with Built-In Self-Test and Latch datasheet (Rev. A) PDF | HTML 2024年 5月 3日
EVM User's guide TPS376X Evaluation Module User's Guide PDF | HTML 2023年 10月 9日
Application brief Using Voltage Supervisors in High Voltage Applications (Rev. B) PDF | HTML 2023年 2月 20日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS376XEVM — 適用於具備 BIST 功能之 65-V 過電壓與欠電壓偵測器的 TPS3762-Q1 評估模組

TPS376XEVM 是適用於 TPS3762-Q1 電壓監控器的評估模組 (EVM)。此系列為車用級裝置，支援欠電壓與過電壓監控器及自我測試功能。TPS376XEVM 出廠時預先安裝了 TPS3762D02OVDDFRQ1 裝置，但也可搭配任何 TPS3762-Q1 變體使用。TPS376XEVM 提供與所有輸入和輸出針腳的連接。基於示波器或萬用表量測之需，提供測試點讓使用者使用額外連接。

使用指南: PDF | HTML
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-23-THN (DDF) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片