TPS53014

Name: TPS53014
Brand: TI
SKU: TPS53014
Price: 0.77 USD

現行

4.5-V 至 28-V，25-A 同步 D-CAP2 降壓控制器

立即訂購

產品規格表

document-pdfAcrobat TPS53014 4.5-V to 28-V Input, D-CAP2™ synchronous buck controller datasheet (Rev. A) (英文) PDF | HTML

TPS53014

現行

產品規格表

立即訂購

產品詳細資料

Vin (min) (V)

4.5

Vin (max) (V)

28

Iout (max) (A)

25

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP2

Topology

Buck

Rating

Catalog

Vout (min) (V)

0.76

Vout (max) (V)

7

Features

Enable, Light Load Efficiency, Pre-Bias Start-Up, Synchronous Rectification

Iq (typ) (µA)

660

Duty cycle (max) (%)

83

Number of phases

1

Vin (min) (V)

4.5

Vin (max) (V)

28

Iout (max) (A)

25

Operating temperature range (°C)

-40 to 85

Control mode

D-CAP2

Topology

Buck

Rating

Catalog

Vout (min) (V)

0.76

Vout (max) (V)

7

Features

Enable, Light Load Efficiency, Pre-Bias Start-Up, Synchronous Rectification

Iq (typ) (µA)

660

Duty cycle (max) (%)

83

Number of phases

1

VSSOP (DGS)

10

14.7 mm² 3 x 4.9

D-CAP2™ mode control
- Fast transient response
- No external parts required for loop compensation
- Compatible with ceramic output capacitors
High initial reference accuracy (±1%)
Wide input voltage range: 4.5 V to 28 V
Output voltage range: 0.77 V to 7.0 V
Low-side R_DS(on) loss-less current sensing
Adjustable soft start
Non-sinking pre-biased soft start
500-kHz Switching frequency
Cycle-by-cycle overcurrent limiting control
Auto-Skip Eco-Mode^TM for High Efficiency at Light load
OCL/OVP/UVP/UVLO/TSD Protections
Adaptive Gate Drivers with Integrated Boost PMOS Switch
Thermally Compensated OCP, 4000 ppm/°C
10 pin VSSOP

D-CAP2™ mode control
- Fast transient response
- No external parts required for loop compensation
- Compatible with ceramic output capacitors
High initial reference accuracy (±1%)
Wide input voltage range: 4.5 V to 28 V
Output voltage range: 0.77 V to 7.0 V
Low-side R_DS(on) loss-less current sensing
Adjustable soft start
Non-sinking pre-biased soft start
500-kHz Switching frequency
Cycle-by-cycle overcurrent limiting control
Auto-Skip Eco-Mode^TM for High Efficiency at Light load
OCL/OVP/UVP/UVLO/TSD Protections
Adaptive Gate Drivers with Integrated Boost PMOS Switch
Thermally Compensated OCP, 4000 ppm/°C
10 pin VSSOP

The TPS53014 is a single, adaptive on-time D-CAP2™ mode synchronous buck controller. The TPS53014 enables system designers to complete the suite of various end equipment’s power bus regulators with cost effective low external component count and low standby current solution. The main control loop for the TPS53014 uses the D-CAP2 mode control which provides a very fast transient response with no external compensation components. The Adaptive on-time control supports seamless transition between PWM mode at higher load condition and Eco-mode™ operation at light load. Eco-mode allows the TPS53014 to maintain high efficiency during lighter load conditions. The TPS53014 is also able to adapt to both low equivalent series resistance (ESR) output capacitors such as POSCAP or SP-CAP and ultra-low ESR ceramic capacitors. The device provides convenient and efficient operation with input voltages from 4.5 V to 28 V and output voltage from 0.77 V to 7 V.

The TPS53014 is available in the 3-mm × 3-mm 10-pin VSSOP (DGS) package and is specified for an ambient temperature range of –40°C to +85°C.

The TPS53014 is a single, adaptive on-time D-CAP2™ mode synchronous buck controller. The TPS53014 enables system designers to complete the suite of various end equipment’s power bus regulators with cost effective low external component count and low standby current solution. The main control loop for the TPS53014 uses the D-CAP2 mode control which provides a very fast transient response with no external compensation components. The Adaptive on-time control supports seamless transition between PWM mode at higher load condition and Eco-mode™ operation at light load. Eco-mode allows the TPS53014 to maintain high efficiency during lighter load conditions. The TPS53014 is also able to adapt to both low equivalent series resistance (ESR) output capacitors such as POSCAP or SP-CAP and ultra-low ESR ceramic capacitors. The device provides convenient and efficient operation with input voltages from 4.5 V to 28 V and output voltage from 0.77 V to 7 V.

The TPS53014 is available in the 3-mm × 3-mm 10-pin VSSOP (DGS) package and is specified for an ambient temperature range of –40°C to +85°C.

filter

尋找其它 AC/DC 和 DC/DC 控制器 (外部 FET)

下載觀看有字幕稿的影片影片

您可能會感興趣的類似產品

open-in-new

比較替代產品

功能與所比較的裝置相似

TPS56837

現行

4.5-V 至 28-V 輸入、8-A 同步降壓轉換器 Higher power density integrated FET converter solution for up to 8A output current

技術文件

star

=TI 所選的此產品重要文件

找不到結果。請清除您的搜尋條件，然後再試一次。

檢視所有 3

	類型	標題		日期
*	Data sheet	TPS53014 4.5-V to 28-V Input, D-CAP2™ synchronous buck controller datasheet (Rev. A)	PDF \| HTML	2019年 2月 21日
	Analog Design Journal	Control-Mode Quick Reference Guide (Rev. B)	PDF \| HTML	2023年 8月 29日
	User guide	TPS53014 Buck Controller Evaluation Module User's Guide (Rev. A)	PDF \| HTML	2021年 12月 14日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS53014EVM-126 — TPS53014 評估模組

The Texas Instruments TPS53014EVM-126 evaluation module (EVM) helps designers evaluate the performance of the TPS53014 synchronous step-down controller. The EVM is designed to use an 8V to 22V voltage rail to produce a regulated 1.05V output with up to 8A load current. The EVM demonstrates the (...)

使用指南: PDF | HTML